Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation
In the last few years, reactivity-controlled compression ignition (RCCI) mode combustion has gained researchers’ attention due to its superior performance, combustion, and emission characteristics compared to other low-temperature combustion (LTC) strategies. In this study, RCCI mode combustion inve...
Gespeichert in:
Veröffentlicht in: | SAE International journal of engines 2021-01, Vol.14 (6), p.765-784, Article 03-14-06-0046 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 784 |
---|---|
container_issue | 6 |
container_start_page | 765 |
container_title | SAE International journal of engines |
container_volume | 14 |
creator | Singh, Akhilendra P. Kumar, Vikram Agarwal, Avinash |
description | In the last few years, reactivity-controlled compression ignition (RCCI) mode combustion has gained researchers’ attention due to its superior performance, combustion, and emission characteristics compared to other low-temperature combustion (LTC) strategies. In this study, RCCI mode combustion investigations were carried out to explore the effects of exhaust gas recirculation (EGR) and intake charge temperature (ICT) on combustion, performance, and emission characteristics of a mineral diesel/methanol-fueled engine. In this study, constant engine speed (1500 rpm) and load (3 bar brake mean effective pressure [BMEP]) were used to perform the engine experiments. The premixed ratio (rp) of methanol was varied from rp = 0 to rp = 0.75, where rp = 0 represents the baseline compression ignition (CI) mode combustion using diesel as fuel. At all rp, EGR rate and ICT were varied from 0 to 30% and 40° to 80°C, respectively. Experimental results exhibited that increasing the EGR was useful in RCCI mode combustion up to medium rp; however, at higher rp, increasing the EGR resulted in incomplete combustion, leading to more hydrocarbon (HC) and carbon monoxide (CO) emissions.
In contrast to EGR, increasing the ICT was more suitable at higher rp, leading to a greater degree of combustion completion. Detailed particulate investigations were performed, which exhibited that increasing the rp resulted in relatively lesser particle emissions. At all rp, increasing the EGR up to 15% led to relatively lower particle emissions; however, a higher EGR of 30% resulted in relatively higher particle emissions. Increasing the ICT resulted in higher particulate emissions; however, at higher rp, EGR and ICT variations were less effective than lower rp. Several qualitative correlations between different particulate characteristics revealed that intermediate EGR (15%) at intermediate ICT was the most suitable condition for optimized RCCI mode combustion. |
doi_str_mv | 10.4271/03-14-06-0046 |
format | Article |
fullrecord | <record><control><sourceid>gale_proqu</sourceid><recordid>TN_cdi_proquest_journals_2601194409</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><galeid>A691523298</galeid><jstor_id>27102169</jstor_id><sourcerecordid>A691523298</sourcerecordid><originalsourceid>FETCH-LOGICAL-c323t-2a7924eb434b0239e9ae2c0550bfe295cae8f96e6d9286959adf4e9897fc602b3</originalsourceid><addsrcrecordid>eNptkdFrFDEQxhdRsFYffRQCPm-dTbK5y2NZaz0oCKU-h9ns5Jpzd3MmOWnxnzfryRVF8pCP4ft9M8xU1dsGLiRfNR9A1I2sQdUAUj2rzhotVS20lM9PWqiX1auUdgBqBQLOqp-3hDb7Hz4_1l2YcwzjSAPrwrSPlJIPM9tsZ58XUYr9If2WmNlH7xxFmjPbzBm_EevuMW6J3dG0p4j5UHiG88CuHu6xYOwaE7sl66M9jLikvK5eOBwTvfnzn1dfP13ddZ_rmy_Xm-7ypraCi1xzXGkuqZdC9sCFJo3ELbQt9I64bi3S2mlFatB8rXSrcXCS9FqvnFXAe3FevT_m7mP4fqCUzS4c4lxaGq6gKauRoJ9cWxzJ-NmFHNFOPllzqXTTcsH1urgu_uMqb6DJ2zCT86X-F1AfARtDSpGc2Uc_YXw0DZjlbAaEaaQBZZazPTVIuORnKoMuy8LxNPS_wLsjsEs5xFN6SQbeKC1-AfVJpAI</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2601194409</pqid></control><display><type>article</type><title>Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation</title><source>Jstor Complete Legacy</source><creator>Singh, Akhilendra P. ; Kumar, Vikram ; Agarwal, Avinash</creator><creatorcontrib>Singh, Akhilendra P. ; Kumar, Vikram ; Agarwal, Avinash</creatorcontrib><description>In the last few years, reactivity-controlled compression ignition (RCCI) mode combustion has gained researchers’ attention due to its superior performance, combustion, and emission characteristics compared to other low-temperature combustion (LTC) strategies. In this study, RCCI mode combustion investigations were carried out to explore the effects of exhaust gas recirculation (EGR) and intake charge temperature (ICT) on combustion, performance, and emission characteristics of a mineral diesel/methanol-fueled engine. In this study, constant engine speed (1500 rpm) and load (3 bar brake mean effective pressure [BMEP]) were used to perform the engine experiments. The premixed ratio (rp) of methanol was varied from rp = 0 to rp = 0.75, where rp = 0 represents the baseline compression ignition (CI) mode combustion using diesel as fuel. At all rp, EGR rate and ICT were varied from 0 to 30% and 40° to 80°C, respectively. Experimental results exhibited that increasing the EGR was useful in RCCI mode combustion up to medium rp; however, at higher rp, increasing the EGR resulted in incomplete combustion, leading to more hydrocarbon (HC) and carbon monoxide (CO) emissions.
In contrast to EGR, increasing the ICT was more suitable at higher rp, leading to a greater degree of combustion completion. Detailed particulate investigations were performed, which exhibited that increasing the rp resulted in relatively lesser particle emissions. At all rp, increasing the EGR up to 15% led to relatively lower particle emissions; however, a higher EGR of 30% resulted in relatively higher particle emissions. Increasing the ICT resulted in higher particulate emissions; however, at higher rp, EGR and ICT variations were less effective than lower rp. Several qualitative correlations between different particulate characteristics revealed that intermediate EGR (15%) at intermediate ICT was the most suitable condition for optimized RCCI mode combustion.</description><identifier>ISSN: 1946-3936</identifier><identifier>ISSN: 1946-3944</identifier><identifier>EISSN: 1946-3944</identifier><identifier>DOI: 10.4271/03-14-06-0046</identifier><language>eng</language><publisher>Warrendale: SAE International</publisher><subject>Combustion ; Diesel engines ; Emission analysis ; Engineering models ; Exhaust gas recirculation ; Exhaust gases ; Ignition ; Intake charge temperature ; Low temperature ; Methanol ; Particulates ; Reactivity-controlled compression ignition</subject><ispartof>SAE International journal of engines, 2021-01, Vol.14 (6), p.765-784, Article 03-14-06-0046</ispartof><rights>2021 SAE International</rights><rights>COPYRIGHT 2021 SAE International</rights><rights>Copyright SAE International, a Pennsylvania Not-for Profit 2021</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c323t-2a7924eb434b0239e9ae2c0550bfe295cae8f96e6d9286959adf4e9897fc602b3</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://www.jstor.org/stable/pdf/27102169$$EPDF$$P50$$Gjstor$$H</linktopdf><linktohtml>$$Uhttps://www.jstor.org/stable/27102169$$EHTML$$P50$$Gjstor$$H</linktohtml><link.rule.ids>314,776,780,799,27901,27902,57992,58225</link.rule.ids></links><search><creatorcontrib>Singh, Akhilendra P.</creatorcontrib><creatorcontrib>Kumar, Vikram</creatorcontrib><creatorcontrib>Agarwal, Avinash</creatorcontrib><title>Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation</title><title>SAE International journal of engines</title><description>In the last few years, reactivity-controlled compression ignition (RCCI) mode combustion has gained researchers’ attention due to its superior performance, combustion, and emission characteristics compared to other low-temperature combustion (LTC) strategies. In this study, RCCI mode combustion investigations were carried out to explore the effects of exhaust gas recirculation (EGR) and intake charge temperature (ICT) on combustion, performance, and emission characteristics of a mineral diesel/methanol-fueled engine. In this study, constant engine speed (1500 rpm) and load (3 bar brake mean effective pressure [BMEP]) were used to perform the engine experiments. The premixed ratio (rp) of methanol was varied from rp = 0 to rp = 0.75, where rp = 0 represents the baseline compression ignition (CI) mode combustion using diesel as fuel. At all rp, EGR rate and ICT were varied from 0 to 30% and 40° to 80°C, respectively. Experimental results exhibited that increasing the EGR was useful in RCCI mode combustion up to medium rp; however, at higher rp, increasing the EGR resulted in incomplete combustion, leading to more hydrocarbon (HC) and carbon monoxide (CO) emissions.
In contrast to EGR, increasing the ICT was more suitable at higher rp, leading to a greater degree of combustion completion. Detailed particulate investigations were performed, which exhibited that increasing the rp resulted in relatively lesser particle emissions. At all rp, increasing the EGR up to 15% led to relatively lower particle emissions; however, a higher EGR of 30% resulted in relatively higher particle emissions. Increasing the ICT resulted in higher particulate emissions; however, at higher rp, EGR and ICT variations were less effective than lower rp. Several qualitative correlations between different particulate characteristics revealed that intermediate EGR (15%) at intermediate ICT was the most suitable condition for optimized RCCI mode combustion.</description><subject>Combustion</subject><subject>Diesel engines</subject><subject>Emission analysis</subject><subject>Engineering models</subject><subject>Exhaust gas recirculation</subject><subject>Exhaust gases</subject><subject>Ignition</subject><subject>Intake charge temperature</subject><subject>Low temperature</subject><subject>Methanol</subject><subject>Particulates</subject><subject>Reactivity-controlled compression ignition</subject><issn>1946-3936</issn><issn>1946-3944</issn><issn>1946-3944</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2021</creationdate><recordtype>article</recordtype><sourceid>BENPR</sourceid><recordid>eNptkdFrFDEQxhdRsFYffRQCPm-dTbK5y2NZaz0oCKU-h9ns5Jpzd3MmOWnxnzfryRVF8pCP4ft9M8xU1dsGLiRfNR9A1I2sQdUAUj2rzhotVS20lM9PWqiX1auUdgBqBQLOqp-3hDb7Hz4_1l2YcwzjSAPrwrSPlJIPM9tsZ58XUYr9If2WmNlH7xxFmjPbzBm_EevuMW6J3dG0p4j5UHiG88CuHu6xYOwaE7sl66M9jLikvK5eOBwTvfnzn1dfP13ddZ_rmy_Xm-7ypraCi1xzXGkuqZdC9sCFJo3ELbQt9I64bi3S2mlFatB8rXSrcXCS9FqvnFXAe3FevT_m7mP4fqCUzS4c4lxaGq6gKauRoJ9cWxzJ-NmFHNFOPllzqXTTcsH1urgu_uMqb6DJ2zCT86X-F1AfARtDSpGc2Uc_YXw0DZjlbAaEaaQBZZazPTVIuORnKoMuy8LxNPS_wLsjsEs5xFN6SQbeKC1-AfVJpAI</recordid><startdate>20210101</startdate><enddate>20210101</enddate><creator>Singh, Akhilendra P.</creator><creator>Kumar, Vikram</creator><creator>Agarwal, Avinash</creator><general>SAE International</general><general>SAE International, a Pennsylvania Not-for Profit</general><scope>AAYXX</scope><scope>CITATION</scope><scope>8FE</scope><scope>8FG</scope><scope>ABJCF</scope><scope>AFKRA</scope><scope>BENPR</scope><scope>BGLVJ</scope><scope>CCPQU</scope><scope>DWQXO</scope><scope>HCIFZ</scope><scope>L6V</scope><scope>M7S</scope><scope>PQEST</scope><scope>PQQKQ</scope><scope>PQUKI</scope><scope>PRINS</scope><scope>PTHSS</scope></search><sort><creationdate>20210101</creationdate><title>Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation</title><author>Singh, Akhilendra P. ; Kumar, Vikram ; Agarwal, Avinash</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c323t-2a7924eb434b0239e9ae2c0550bfe295cae8f96e6d9286959adf4e9897fc602b3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2021</creationdate><topic>Combustion</topic><topic>Diesel engines</topic><topic>Emission analysis</topic><topic>Engineering models</topic><topic>Exhaust gas recirculation</topic><topic>Exhaust gases</topic><topic>Ignition</topic><topic>Intake charge temperature</topic><topic>Low temperature</topic><topic>Methanol</topic><topic>Particulates</topic><topic>Reactivity-controlled compression ignition</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Singh, Akhilendra P.</creatorcontrib><creatorcontrib>Kumar, Vikram</creatorcontrib><creatorcontrib>Agarwal, Avinash</creatorcontrib><collection>CrossRef</collection><collection>ProQuest SciTech Collection</collection><collection>ProQuest Technology Collection</collection><collection>Materials Science & Engineering Collection</collection><collection>ProQuest Central UK/Ireland</collection><collection>ProQuest Central</collection><collection>Technology Collection</collection><collection>ProQuest One Community College</collection><collection>ProQuest Central Korea</collection><collection>SciTech Premium Collection</collection><collection>ProQuest Engineering Collection</collection><collection>Engineering Database</collection><collection>ProQuest One Academic Eastern Edition (DO NOT USE)</collection><collection>ProQuest One Academic</collection><collection>ProQuest One Academic UKI Edition</collection><collection>ProQuest Central China</collection><collection>Engineering Collection</collection><jtitle>SAE International journal of engines</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Singh, Akhilendra P.</au><au>Kumar, Vikram</au><au>Agarwal, Avinash</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation</atitle><jtitle>SAE International journal of engines</jtitle><date>2021-01-01</date><risdate>2021</risdate><volume>14</volume><issue>6</issue><spage>765</spage><epage>784</epage><pages>765-784</pages><artnum>03-14-06-0046</artnum><issn>1946-3936</issn><issn>1946-3944</issn><eissn>1946-3944</eissn><abstract>In the last few years, reactivity-controlled compression ignition (RCCI) mode combustion has gained researchers’ attention due to its superior performance, combustion, and emission characteristics compared to other low-temperature combustion (LTC) strategies. In this study, RCCI mode combustion investigations were carried out to explore the effects of exhaust gas recirculation (EGR) and intake charge temperature (ICT) on combustion, performance, and emission characteristics of a mineral diesel/methanol-fueled engine. In this study, constant engine speed (1500 rpm) and load (3 bar brake mean effective pressure [BMEP]) were used to perform the engine experiments. The premixed ratio (rp) of methanol was varied from rp = 0 to rp = 0.75, where rp = 0 represents the baseline compression ignition (CI) mode combustion using diesel as fuel. At all rp, EGR rate and ICT were varied from 0 to 30% and 40° to 80°C, respectively. Experimental results exhibited that increasing the EGR was useful in RCCI mode combustion up to medium rp; however, at higher rp, increasing the EGR resulted in incomplete combustion, leading to more hydrocarbon (HC) and carbon monoxide (CO) emissions.
In contrast to EGR, increasing the ICT was more suitable at higher rp, leading to a greater degree of combustion completion. Detailed particulate investigations were performed, which exhibited that increasing the rp resulted in relatively lesser particle emissions. At all rp, increasing the EGR up to 15% led to relatively lower particle emissions; however, a higher EGR of 30% resulted in relatively higher particle emissions. Increasing the ICT resulted in higher particulate emissions; however, at higher rp, EGR and ICT variations were less effective than lower rp. Several qualitative correlations between different particulate characteristics revealed that intermediate EGR (15%) at intermediate ICT was the most suitable condition for optimized RCCI mode combustion.</abstract><cop>Warrendale</cop><pub>SAE International</pub><doi>10.4271/03-14-06-0046</doi><tpages>20</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 1946-3936 |
ispartof | SAE International journal of engines, 2021-01, Vol.14 (6), p.765-784, Article 03-14-06-0046 |
issn | 1946-3936 1946-3944 1946-3944 |
language | eng |
recordid | cdi_proquest_journals_2601194409 |
source | Jstor Complete Legacy |
subjects | Combustion Diesel engines Emission analysis Engineering models Exhaust gas recirculation Exhaust gases Ignition Intake charge temperature Low temperature Methanol Particulates Reactivity-controlled compression ignition |
title | Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-02T04%3A24%3A00IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-gale_proqu&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Reactivity-Controlled%20Compression%20Ignition%20Combustion%20at%20Different%20Intake%20Charge%20Temperatures%20and%20Exhaust%20Gas%20Recirculation&rft.jtitle=SAE%20International%20journal%20of%20engines&rft.au=Singh,%20Akhilendra%20P.&rft.date=2021-01-01&rft.volume=14&rft.issue=6&rft.spage=765&rft.epage=784&rft.pages=765-784&rft.artnum=03-14-06-0046&rft.issn=1946-3936&rft.eissn=1946-3944&rft_id=info:doi/10.4271/03-14-06-0046&rft_dat=%3Cgale_proqu%3EA691523298%3C/gale_proqu%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2601194409&rft_id=info:pmid/&rft_galeid=A691523298&rft_jstor_id=27102169&rfr_iscdi=true |