Application of polymer blend based on natural rubber latex and acrylic resin as a binder for wall paints
In this study, the polymer blends based on natural rubber latex and acrylic resin was prepared. It was then utilized as a binder for paint. The blending ratios between natural rubber latex and acrylic resin were varied from 30/70, 40/60, 50/50, 60/40, and 70/30 (w/w) where the natural rubber latex w...
Gespeichert in:
| Veröffentlicht in: | IOP conference series. Materials Science and Engineering 2020-02, Vol.773 (1), p.12032 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | 1 |
| container_start_page | 12032 |
| container_title | IOP conference series. Materials Science and Engineering |
| container_volume | 773 |
| creator | Worlee, A Homdong, N Hayeemasae, N |
| description | In this study, the polymer blends based on natural rubber latex and acrylic resin was prepared. It was then utilized as a binder for paint. The blending ratios between natural rubber latex and acrylic resin were varied from 30/70, 40/60, 50/50, 60/40, and 70/30 (w/w) where the natural rubber latex was pre-vulcanized prior to be blended with acrylic resin. The investigation was monitored through the physical and mechanical properties of the blends. Highest tensile strength and elongation at break were found at the blending ratio at 30/70 (w/w) of natural rubber latex and acrylic resin. This may be attributed to the compatibility between elastic phase of the natural rubber and hard phase of acrylic resin. When adding higher ratio of natural rubber latex, the tensile strength and elongation at break dropped continuously, indicating inhomogeneity of these two phases. To confirm the compatibility of the blend at 30/70 (w/w), the gel content was also observed. It is clear that such blend completely dissolved in non-polar solvent unlike other blending ratios. Therefore, this blending ratio is highly suggested and appropriate for applying as binder for paint. |
| doi_str_mv | 10.1088/1757-899X/773/1/012032 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_iop_j</sourceid><recordid>TN_cdi_proquest_journals_2562173636</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2562173636</sourcerecordid><originalsourceid>FETCH-LOGICAL-c3222-b58df278f47800a506208505dca96789302ba4e0006b0facbcf9472731629893</originalsourceid><addsrcrecordid>eNqFkEtLxDAUhYMoOI7-BQm4cVObpI-ky2HwBSMunIW7cNMm2CHTxqRF59-boTIiCHIXuXC-cy45CF1SckOJECnlBU9EVb2mnGcpTQllJGNHaHYQjg-7oKfoLIQNISXPczJDbwvnbFvD0PYd7g12vd1ttcfK6q7BCoJucFQ6GEYPFvtRqahaGPQnhkhA7XfRj70ObYchYMCq7ZrImN7jD7AWO2i7IZyjEwM26Ivvd47Wd7fr5UOyer5_XC5WSZ0xxhJViMYwLkzOBSFQkJIRUZCiqaEquagywhTkmsQPKGKgVrWpcs54RktWRXmOrqZY5_v3UYdBbvrRd_GiZEXJKM_KOHNUTlTt-xC8NtL5dgt-JymR-1Llvi-5707GUiWVU6nReD0Z2979JD-93P7CpGtMRNkf6D_5X9YFhaw</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2562173636</pqid></control><display><type>article</type><title>Application of polymer blend based on natural rubber latex and acrylic resin as a binder for wall paints</title><source>Institute of Physics IOPscience extra</source><source>EZB-FREE-00999 freely available EZB journals</source><source>Institute of Physics Open Access Journal Titles</source><source>Free Full-Text Journals in Chemistry</source><creator>Worlee, A ; Homdong, N ; Hayeemasae, N</creator><creatorcontrib>Worlee, A ; Homdong, N ; Hayeemasae, N</creatorcontrib><description>In this study, the polymer blends based on natural rubber latex and acrylic resin was prepared. It was then utilized as a binder for paint. The blending ratios between natural rubber latex and acrylic resin were varied from 30/70, 40/60, 50/50, 60/40, and 70/30 (w/w) where the natural rubber latex was pre-vulcanized prior to be blended with acrylic resin. The investigation was monitored through the physical and mechanical properties of the blends. Highest tensile strength and elongation at break were found at the blending ratio at 30/70 (w/w) of natural rubber latex and acrylic resin. This may be attributed to the compatibility between elastic phase of the natural rubber and hard phase of acrylic resin. When adding higher ratio of natural rubber latex, the tensile strength and elongation at break dropped continuously, indicating inhomogeneity of these two phases. To confirm the compatibility of the blend at 30/70 (w/w), the gel content was also observed. It is clear that such blend completely dissolved in non-polar solvent unlike other blending ratios. Therefore, this blending ratio is highly suggested and appropriate for applying as binder for paint.</description><identifier>ISSN: 1757-8981</identifier><identifier>EISSN: 1757-899X</identifier><identifier>DOI: 10.1088/1757-899X/773/1/012032</identifier><language>eng</language><publisher>Bristol: IOP Publishing</publisher><subject>Acrylic resins ; Blending ; Compatibility ; Elongation ; Inhomogeneity ; Latex ; Mechanical properties ; Natural rubber ; Physical properties ; Polymer blends ; Polymers ; Rubber products ; Tensile strength</subject><ispartof>IOP conference series. Materials Science and Engineering, 2020-02, Vol.773 (1), p.12032</ispartof><rights>Published under licence by IOP Publishing Ltd</rights><rights>2020. This work is published under http://creativecommons.org/licenses/by/3.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c3222-b58df278f47800a506208505dca96789302ba4e0006b0facbcf9472731629893</citedby><cites>FETCH-LOGICAL-c3222-b58df278f47800a506208505dca96789302ba4e0006b0facbcf9472731629893</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://iopscience.iop.org/article/10.1088/1757-899X/773/1/012032/pdf$$EPDF$$P50$$Giop$$Hfree_for_read</linktopdf><link.rule.ids>314,776,780,27901,27902,38845,38867,53815,53842</link.rule.ids></links><search><creatorcontrib>Worlee, A</creatorcontrib><creatorcontrib>Homdong, N</creatorcontrib><creatorcontrib>Hayeemasae, N</creatorcontrib><title>Application of polymer blend based on natural rubber latex and acrylic resin as a binder for wall paints</title><title>IOP conference series. Materials Science and Engineering</title><addtitle>IOP Conf. Ser.: Mater. Sci. Eng</addtitle><description>In this study, the polymer blends based on natural rubber latex and acrylic resin was prepared. It was then utilized as a binder for paint. The blending ratios between natural rubber latex and acrylic resin were varied from 30/70, 40/60, 50/50, 60/40, and 70/30 (w/w) where the natural rubber latex was pre-vulcanized prior to be blended with acrylic resin. The investigation was monitored through the physical and mechanical properties of the blends. Highest tensile strength and elongation at break were found at the blending ratio at 30/70 (w/w) of natural rubber latex and acrylic resin. This may be attributed to the compatibility between elastic phase of the natural rubber and hard phase of acrylic resin. When adding higher ratio of natural rubber latex, the tensile strength and elongation at break dropped continuously, indicating inhomogeneity of these two phases. To confirm the compatibility of the blend at 30/70 (w/w), the gel content was also observed. It is clear that such blend completely dissolved in non-polar solvent unlike other blending ratios. Therefore, this blending ratio is highly suggested and appropriate for applying as binder for paint.</description><subject>Acrylic resins</subject><subject>Blending</subject><subject>Compatibility</subject><subject>Elongation</subject><subject>Inhomogeneity</subject><subject>Latex</subject><subject>Mechanical properties</subject><subject>Natural rubber</subject><subject>Physical properties</subject><subject>Polymer blends</subject><subject>Polymers</subject><subject>Rubber products</subject><subject>Tensile strength</subject><issn>1757-8981</issn><issn>1757-899X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2020</creationdate><recordtype>article</recordtype><sourceid>O3W</sourceid><sourceid>BENPR</sourceid><recordid>eNqFkEtLxDAUhYMoOI7-BQm4cVObpI-ky2HwBSMunIW7cNMm2CHTxqRF59-boTIiCHIXuXC-cy45CF1SckOJECnlBU9EVb2mnGcpTQllJGNHaHYQjg-7oKfoLIQNISXPczJDbwvnbFvD0PYd7g12vd1ttcfK6q7BCoJucFQ6GEYPFvtRqahaGPQnhkhA7XfRj70ObYchYMCq7ZrImN7jD7AWO2i7IZyjEwM26Ivvd47Wd7fr5UOyer5_XC5WSZ0xxhJViMYwLkzOBSFQkJIRUZCiqaEquagywhTkmsQPKGKgVrWpcs54RktWRXmOrqZY5_v3UYdBbvrRd_GiZEXJKM_KOHNUTlTt-xC8NtL5dgt-JymR-1Llvi-5707GUiWVU6nReD0Z2979JD-93P7CpGtMRNkf6D_5X9YFhaw</recordid><startdate>20200201</startdate><enddate>20200201</enddate><creator>Worlee, A</creator><creator>Homdong, N</creator><creator>Hayeemasae, N</creator><general>IOP Publishing</general><scope>O3W</scope><scope>TSCCA</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>8FE</scope><scope>8FG</scope><scope>ABJCF</scope><scope>ABUWG</scope><scope>AFKRA</scope><scope>AZQEC</scope><scope>BENPR</scope><scope>BGLVJ</scope><scope>CCPQU</scope><scope>D1I</scope><scope>DWQXO</scope><scope>HCIFZ</scope><scope>KB.</scope><scope>L6V</scope><scope>M7S</scope><scope>PDBOC</scope><scope>PIMPY</scope><scope>PQEST</scope><scope>PQQKQ</scope><scope>PQUKI</scope><scope>PRINS</scope><scope>PTHSS</scope></search><sort><creationdate>20200201</creationdate><title>Application of polymer blend based on natural rubber latex and acrylic resin as a binder for wall paints</title><author>Worlee, A ; Homdong, N ; Hayeemasae, N</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c3222-b58df278f47800a506208505dca96789302ba4e0006b0facbcf9472731629893</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2020</creationdate><topic>Acrylic resins</topic><topic>Blending</topic><topic>Compatibility</topic><topic>Elongation</topic><topic>Inhomogeneity</topic><topic>Latex</topic><topic>Mechanical properties</topic><topic>Natural rubber</topic><topic>Physical properties</topic><topic>Polymer blends</topic><topic>Polymers</topic><topic>Rubber products</topic><topic>Tensile strength</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Worlee, A</creatorcontrib><creatorcontrib>Homdong, N</creatorcontrib><creatorcontrib>Hayeemasae, N</creatorcontrib><collection>Institute of Physics Open Access Journal Titles</collection><collection>IOPscience (Open Access)</collection><collection>CrossRef</collection><collection>ProQuest SciTech Collection</collection><collection>ProQuest Technology Collection</collection><collection>Materials Science & Engineering Collection</collection><collection>ProQuest Central (Alumni Edition)</collection><collection>ProQuest Central UK/Ireland</collection><collection>ProQuest Central Essentials</collection><collection>ProQuest Central</collection><collection>Technology Collection</collection><collection>ProQuest One Community College</collection><collection>ProQuest Materials Science Collection</collection><collection>ProQuest Central Korea</collection><collection>SciTech Premium Collection</collection><collection>Materials Science Database</collection><collection>ProQuest Engineering Collection</collection><collection>Engineering Database</collection><collection>Materials Science Collection</collection><collection>Publicly Available Content Database</collection><collection>ProQuest One Academic Eastern Edition (DO NOT USE)</collection><collection>ProQuest One Academic</collection><collection>ProQuest One Academic UKI Edition</collection><collection>ProQuest Central China</collection><collection>Engineering Collection</collection><jtitle>IOP conference series. Materials Science and Engineering</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Worlee, A</au><au>Homdong, N</au><au>Hayeemasae, N</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Application of polymer blend based on natural rubber latex and acrylic resin as a binder for wall paints</atitle><jtitle>IOP conference series. Materials Science and Engineering</jtitle><addtitle>IOP Conf. Ser.: Mater. Sci. Eng</addtitle><date>2020-02-01</date><risdate>2020</risdate><volume>773</volume><issue>1</issue><spage>12032</spage><pages>12032-</pages><issn>1757-8981</issn><eissn>1757-899X</eissn><abstract>In this study, the polymer blends based on natural rubber latex and acrylic resin was prepared. It was then utilized as a binder for paint. The blending ratios between natural rubber latex and acrylic resin were varied from 30/70, 40/60, 50/50, 60/40, and 70/30 (w/w) where the natural rubber latex was pre-vulcanized prior to be blended with acrylic resin. The investigation was monitored through the physical and mechanical properties of the blends. Highest tensile strength and elongation at break were found at the blending ratio at 30/70 (w/w) of natural rubber latex and acrylic resin. This may be attributed to the compatibility between elastic phase of the natural rubber and hard phase of acrylic resin. When adding higher ratio of natural rubber latex, the tensile strength and elongation at break dropped continuously, indicating inhomogeneity of these two phases. To confirm the compatibility of the blend at 30/70 (w/w), the gel content was also observed. It is clear that such blend completely dissolved in non-polar solvent unlike other blending ratios. Therefore, this blending ratio is highly suggested and appropriate for applying as binder for paint.</abstract><cop>Bristol</cop><pub>IOP Publishing</pub><doi>10.1088/1757-899X/773/1/012032</doi><tpages>4</tpages><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1757-8981 |
| ispartof | IOP conference series. Materials Science and Engineering, 2020-02, Vol.773 (1), p.12032 |
| issn | 1757-8981 1757-899X |
| language | eng |
| recordid | cdi_proquest_journals_2562173636 |
| source | Institute of Physics IOPscience extra; EZB-FREE-00999 freely available EZB journals; Institute of Physics Open Access Journal Titles; Free Full-Text Journals in Chemistry |
| subjects | Acrylic resins Blending Compatibility Elongation Inhomogeneity Latex Mechanical properties Natural rubber Physical properties Polymer blends Polymers Rubber products Tensile strength |
| title | Application of polymer blend based on natural rubber latex and acrylic resin as a binder for wall paints |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-29T00%3A38%3A43IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_iop_j&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Application%20of%20polymer%20blend%20based%20on%20natural%20rubber%20latex%20and%20acrylic%20resin%20as%20a%20binder%20for%20wall%20paints&rft.jtitle=IOP%20conference%20series.%20Materials%20Science%20and%20Engineering&rft.au=Worlee,%20A&rft.date=2020-02-01&rft.volume=773&rft.issue=1&rft.spage=12032&rft.pages=12032-&rft.issn=1757-8981&rft.eissn=1757-899X&rft_id=info:doi/10.1088/1757-899X/773/1/012032&rft_dat=%3Cproquest_iop_j%3E2562173636%3C/proquest_iop_j%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2562173636&rft_id=info:pmid/&rfr_iscdi=true |