Research of mechanical properties and chemical composition of samples made of aluminium alloy AMg6 and obtained by electron beam additive manufacturing with wire feeding

This paper is devoted to the definition of mechanical properties, porosity and chemical composition of the samples made of wrought aluminium alloy AMg6 and obtained by electron beam additive manufacturing with wire feeding. It has been established that ultimate strength of the deposited metal is 90...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	IOP conference series. Materials Science and Engineering 2020-02, Vol.759 (1), p.12010
Hauptverfasser:	Gudenko, A V, Grigoriev, G V, Sliva, A P, Yu Agafonov, R, Kasitsyn, A N
Format:	Artikel
Sprache:	eng
Schlagworte:	Additive manufacturing Aluminum base alloys Chemical composition Electron beams Manufacturing Mechanical properties Porosity Ultimate tensile strength Wire
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	This paper is devoted to the definition of mechanical properties, porosity and chemical composition of the samples made of wrought aluminium alloy AMg6 and obtained by electron beam additive manufacturing with wire feeding. It has been established that ultimate strength of the deposited metal is 90 % of the rolled metal. Chemical composition of the samples has not differed significantly from wire. According to rough estimations porosity has not exceeded 0.055%.
ISSN:	1757-8981 1757-899X
DOI:	10.1088/1757-899X/759/1/012010