Modification of Gearing for Improving Technical and Economic Characteristics of Drive Gearboxes in Oil Pumping Units
A method for improving the technical and economic characteristics of the drive gearboxes of oil pumping units is presented. Models of gearboxes containing thermally improved Novikov gearing having a standard basic rack profile are considered. The effect of increasing the gear module, as described in...
Gespeichert in:
| Veröffentlicht in: | Chemical and petroleum engineering 2021-07, Vol.57 (3-4), p.231-238 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 238 |
|---|---|
| container_issue | 3-4 |
| container_start_page | 231 |
| container_title | Chemical and petroleum engineering |
| container_volume | 57 |
| creator | Korotkin, V. I. Kolosova, E. M. |
| description | A method for improving the technical and economic characteristics of the drive gearboxes of oil pumping units is presented. Models of gearboxes containing thermally improved Novikov gearing having a standard basic rack profile are considered. The effect of increasing the gear module, as described in the author's previous works, is dramatically enhanced by the proposed longitudinal modification of the surfaces of the teeth, which can be performed using standard equipment. The intensity and rigidity of the teeth are determined by solving the 3D contact problem, while the law of load distribution over the contact areas is determined by performing simulations of actual gearing. The comprehensive modification provides a 2.5- to 4-fold increase in load-bearing capacity at all gear stages, along with a similar increase in their operability. |
| doi_str_mv | 10.1007/s10556-021-00923-y |
| format | Article |
| fullrecord | <record><control><sourceid>gale_proqu</sourceid><recordid>TN_cdi_proquest_journals_2555359291</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><galeid>A669767308</galeid><sourcerecordid>A669767308</sourcerecordid><originalsourceid>FETCH-LOGICAL-c392t-8393479d374b0e298a6a348627bbe12deccfcab5a4be2ecd2e8f9489e68f008c3</originalsourceid><addsrcrecordid>eNp9kUtLxDAUhYMoOD7-gKuAKxfVNGnaZinja0BRfKxDmt6MkZlkTDLi_HtTK4gbySLcy3fuvYeD0FFJTktCmrNYEs7rgtCyIERQVmy20KTkDStaRsU2mpDcLijjfBftxfg2lA2lE5TufG-N1SpZ77A3-BpUsG6OjQ94tlwF_zFUz6BfXaYWWLkeX2rv_NJqPH1VQekEwcZkdRz0F8F-wPeUzn9CxNbhe7vAD-vlahj04myKB2jHqEWEw59_H71cXT5Pb4rb--vZ9Py20EzQlE8XrGpEz5qqI0BFq2rFqramTddBSXvQ2mjVcVV1QEH3FFojqlZA3RpCWs320fE4N9t4X0NM8s2vg8srJeWcMy6oKDN1OlJztQBpnfEpm8qvh-zROzA298_rWjR1w0ibBSd_BJlJ8Jnmah2jnD09_mXpyOrgYwxg5CrYpQobWRI5RCfH6GSOTn5HJzdZxEZRXA1ZQPi9-x_VF7ltnMk</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2555359291</pqid></control><display><type>article</type><title>Modification of Gearing for Improving Technical and Economic Characteristics of Drive Gearboxes in Oil Pumping Units</title><source>SpringerLink Journals - AutoHoldings</source><creator>Korotkin, V. I. ; Kolosova, E. M.</creator><creatorcontrib>Korotkin, V. I. ; Kolosova, E. M.</creatorcontrib><description>A method for improving the technical and economic characteristics of the drive gearboxes of oil pumping units is presented. Models of gearboxes containing thermally improved Novikov gearing having a standard basic rack profile are considered. The effect of increasing the gear module, as described in the author's previous works, is dramatically enhanced by the proposed longitudinal modification of the surfaces of the teeth, which can be performed using standard equipment. The intensity and rigidity of the teeth are determined by solving the 3D contact problem, while the law of load distribution over the contact areas is determined by performing simulations of actual gearing. The comprehensive modification provides a 2.5- to 4-fold increase in load-bearing capacity at all gear stages, along with a similar increase in their operability.</description><identifier>ISSN: 0009-2355</identifier><identifier>EISSN: 1573-8329</identifier><identifier>DOI: 10.1007/s10556-021-00923-y</identifier><language>eng</language><publisher>New York: Springer US</publisher><subject>Automation of Numerical Analyses and Design ; Bearing capacity ; Chemistry ; Chemistry and Materials Science ; Gearboxes ; Gears ; Geotechnical Engineering & Applied Earth Sciences ; Industrial Chemistry/Chemical Engineering ; Industrial Pollution Prevention ; Load distribution (forces) ; Mineral Resources ; Pumping ; Stress concentration</subject><ispartof>Chemical and petroleum engineering, 2021-07, Vol.57 (3-4), p.231-238</ispartof><rights>Springer Science+Business Media, LLC, part of Springer Nature 2021</rights><rights>COPYRIGHT 2021 Springer</rights><rights>Springer Science+Business Media, LLC, part of Springer Nature 2021.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c392t-8393479d374b0e298a6a348627bbe12deccfcab5a4be2ecd2e8f9489e68f008c3</citedby><cites>FETCH-LOGICAL-c392t-8393479d374b0e298a6a348627bbe12deccfcab5a4be2ecd2e8f9489e68f008c3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://link.springer.com/content/pdf/10.1007/s10556-021-00923-y$$EPDF$$P50$$Gspringer$$H</linktopdf><linktohtml>$$Uhttps://link.springer.com/10.1007/s10556-021-00923-y$$EHTML$$P50$$Gspringer$$H</linktohtml><link.rule.ids>314,780,784,27923,27924,41487,42556,51318</link.rule.ids></links><search><creatorcontrib>Korotkin, V. I.</creatorcontrib><creatorcontrib>Kolosova, E. M.</creatorcontrib><title>Modification of Gearing for Improving Technical and Economic Characteristics of Drive Gearboxes in Oil Pumping Units</title><title>Chemical and petroleum engineering</title><addtitle>Chem Petrol Eng</addtitle><description>A method for improving the technical and economic characteristics of the drive gearboxes of oil pumping units is presented. Models of gearboxes containing thermally improved Novikov gearing having a standard basic rack profile are considered. The effect of increasing the gear module, as described in the author's previous works, is dramatically enhanced by the proposed longitudinal modification of the surfaces of the teeth, which can be performed using standard equipment. The intensity and rigidity of the teeth are determined by solving the 3D contact problem, while the law of load distribution over the contact areas is determined by performing simulations of actual gearing. The comprehensive modification provides a 2.5- to 4-fold increase in load-bearing capacity at all gear stages, along with a similar increase in their operability.</description><subject>Automation of Numerical Analyses and Design</subject><subject>Bearing capacity</subject><subject>Chemistry</subject><subject>Chemistry and Materials Science</subject><subject>Gearboxes</subject><subject>Gears</subject><subject>Geotechnical Engineering & Applied Earth Sciences</subject><subject>Industrial Chemistry/Chemical Engineering</subject><subject>Industrial Pollution Prevention</subject><subject>Load distribution (forces)</subject><subject>Mineral Resources</subject><subject>Pumping</subject><subject>Stress concentration</subject><issn>0009-2355</issn><issn>1573-8329</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2021</creationdate><recordtype>article</recordtype><recordid>eNp9kUtLxDAUhYMoOD7-gKuAKxfVNGnaZinja0BRfKxDmt6MkZlkTDLi_HtTK4gbySLcy3fuvYeD0FFJTktCmrNYEs7rgtCyIERQVmy20KTkDStaRsU2mpDcLijjfBftxfg2lA2lE5TufG-N1SpZ77A3-BpUsG6OjQ94tlwF_zFUz6BfXaYWWLkeX2rv_NJqPH1VQekEwcZkdRz0F8F-wPeUzn9CxNbhe7vAD-vlahj04myKB2jHqEWEw59_H71cXT5Pb4rb--vZ9Py20EzQlE8XrGpEz5qqI0BFq2rFqramTddBSXvQ2mjVcVV1QEH3FFojqlZA3RpCWs320fE4N9t4X0NM8s2vg8srJeWcMy6oKDN1OlJztQBpnfEpm8qvh-zROzA298_rWjR1w0ibBSd_BJlJ8Jnmah2jnD09_mXpyOrgYwxg5CrYpQobWRI5RCfH6GSOTn5HJzdZxEZRXA1ZQPi9-x_VF7ltnMk</recordid><startdate>20210701</startdate><enddate>20210701</enddate><creator>Korotkin, V. I.</creator><creator>Kolosova, E. M.</creator><general>Springer US</general><general>Springer</general><general>Springer Nature B.V</general><scope>AAYXX</scope><scope>CITATION</scope><scope>ISR</scope></search><sort><creationdate>20210701</creationdate><title>Modification of Gearing for Improving Technical and Economic Characteristics of Drive Gearboxes in Oil Pumping Units</title><author>Korotkin, V. I. ; Kolosova, E. M.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c392t-8393479d374b0e298a6a348627bbe12deccfcab5a4be2ecd2e8f9489e68f008c3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2021</creationdate><topic>Automation of Numerical Analyses and Design</topic><topic>Bearing capacity</topic><topic>Chemistry</topic><topic>Chemistry and Materials Science</topic><topic>Gearboxes</topic><topic>Gears</topic><topic>Geotechnical Engineering & Applied Earth Sciences</topic><topic>Industrial Chemistry/Chemical Engineering</topic><topic>Industrial Pollution Prevention</topic><topic>Load distribution (forces)</topic><topic>Mineral Resources</topic><topic>Pumping</topic><topic>Stress concentration</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Korotkin, V. I.</creatorcontrib><creatorcontrib>Kolosova, E. M.</creatorcontrib><collection>CrossRef</collection><collection>Gale In Context: Science</collection><jtitle>Chemical and petroleum engineering</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Korotkin, V. I.</au><au>Kolosova, E. M.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Modification of Gearing for Improving Technical and Economic Characteristics of Drive Gearboxes in Oil Pumping Units</atitle><jtitle>Chemical and petroleum engineering</jtitle><stitle>Chem Petrol Eng</stitle><date>2021-07-01</date><risdate>2021</risdate><volume>57</volume><issue>3-4</issue><spage>231</spage><epage>238</epage><pages>231-238</pages><issn>0009-2355</issn><eissn>1573-8329</eissn><abstract>A method for improving the technical and economic characteristics of the drive gearboxes of oil pumping units is presented. Models of gearboxes containing thermally improved Novikov gearing having a standard basic rack profile are considered. The effect of increasing the gear module, as described in the author's previous works, is dramatically enhanced by the proposed longitudinal modification of the surfaces of the teeth, which can be performed using standard equipment. The intensity and rigidity of the teeth are determined by solving the 3D contact problem, while the law of load distribution over the contact areas is determined by performing simulations of actual gearing. The comprehensive modification provides a 2.5- to 4-fold increase in load-bearing capacity at all gear stages, along with a similar increase in their operability.</abstract><cop>New York</cop><pub>Springer US</pub><doi>10.1007/s10556-021-00923-y</doi><tpages>8</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0009-2355 |
| ispartof | Chemical and petroleum engineering, 2021-07, Vol.57 (3-4), p.231-238 |
| issn | 0009-2355 1573-8329 |
| language | eng |
| recordid | cdi_proquest_journals_2555359291 |
| source | SpringerLink Journals - AutoHoldings |
| subjects | Automation of Numerical Analyses and Design Bearing capacity Chemistry Chemistry and Materials Science Gearboxes Gears Geotechnical Engineering & Applied Earth Sciences Industrial Chemistry/Chemical Engineering Industrial Pollution Prevention Load distribution (forces) Mineral Resources Pumping Stress concentration |
| title | Modification of Gearing for Improving Technical and Economic Characteristics of Drive Gearboxes in Oil Pumping Units |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-11T13%3A19%3A14IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-gale_proqu&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Modification%20of%20Gearing%20for%20Improving%20Technical%20and%20Economic%20Characteristics%20of%20Drive%20Gearboxes%20in%20Oil%20Pumping%20Units&rft.jtitle=Chemical%20and%20petroleum%20engineering&rft.au=Korotkin,%20V.%20I.&rft.date=2021-07-01&rft.volume=57&rft.issue=3-4&rft.spage=231&rft.epage=238&rft.pages=231-238&rft.issn=0009-2355&rft.eissn=1573-8329&rft_id=info:doi/10.1007/s10556-021-00923-y&rft_dat=%3Cgale_proqu%3EA669767308%3C/gale_proqu%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2555359291&rft_id=info:pmid/&rft_galeid=A669767308&rfr_iscdi=true |