Adaptive Algorithm of Quasi-Stationary Periodic ProcessesMeasurements Control

The aim of the work was to create an effective method of control of linear measuring systems functioning in the conditions of the prevailing influence of distortions caused by variability in time of measuring conversion parameters. The method and the algorithm of control of measurements of the quasi-stationary periodic process spectrum in frequency-domain and form in time-domain are presented, consisting in the simultaneous separate observation of the parameters of the process under probe and the parameters of the measuring system with the subsequent introduction of corrections. The control of system parameters is carried out using the artificial stationary polyharmonic sample impact. The spectra of the main and sample processes are not intersected. A synthesizing method of the form in time-domain of the sample impact process is presented. The main limitations and the range of conditions for the possible application of the method are determined, its effectiveness is shown on the example of the experimental data obtained during the low-frequency inductive electrical prospecting system functioning in alternating magnetic field measuring mode.