Consideration of machining phenomena based on tool rotation coordinate system monitoring in thread cutting by helical interpolation thread mill
This study was performed to improve the precision of a thread by deriving its radial force (thrust force) with a four-component piezoelectric dynamometer and thread cutting by helical interpolation motion using a thread mill. In addition, using a wireless holder, the display of cutting force in pola...
Gespeichert in:
| Veröffentlicht in: | Journal of the Japan Society for Abrasive Technology 2020/05/01, Vol.64(5), pp.260-266 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | jpn |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 266 |
|---|---|
| container_issue | 5 |
| container_start_page | 260 |
| container_title | Journal of the Japan Society for Abrasive Technology |
| container_volume | 64 |
| creator | MATSUI, Shota OZAKI, Nobutoshi HIROGAKI, Toshiki AOYAMA, Eiichi Matsuda, Ryo |
| description | This study was performed to improve the precision of a thread by deriving its radial force (thrust force) with a four-component piezoelectric dynamometer and thread cutting by helical interpolation motion using a thread mill. In addition, using a wireless holder, the display of cutting force in polar coordinates and its characteristics were considered, and the consistency of the proposed method was confirmed. The cutting force resulting from the revolution and rotation of the tool during thread cutting was analyzed based on the proposed method and position information from the wireless holder and the servo drive unit, and the phenomena occurring between the rough cutting edge and the finishing cutting edge during thread cutting were clarified. The relationship between work material hardness and cutting force was examined, and thread machining was studied. |
| doi_str_mv | 10.11420/jsat.64.260 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_jstag</sourceid><recordid>TN_cdi_proquest_journals_2474569132</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2474569132</sourcerecordid><originalsourceid>FETCH-LOGICAL-j832-7402258b07df9f5cb555753abf83d9bc830e9528b1e6f9cf01ea3f3ea7d8d9f93</originalsourceid><addsrcrecordid>eNo9kMtqwzAQRUVpoWnaXT9A0LVTPSw_NoUS-oJAN9kbWR7FMrLkSsoiX9FfroNDNzMw98wd5iL0SMmG0pyR5yHKtCnyDSvIFVrRqiJZKXh-jVakpnnGSsJv0V2MAyFFTQldod-td9F0EGQy3mGv8ShVb5xxBzz14PwITuJWRujwrCfvLQ4-LbTyPnTGyQQ4nmKCEY_emeTDedvMdB9AdlgdUzpP2hPuwRol7SwmCJO3i8-FG4219-hGSxvh4dLXaP_-tt9-Zrvvj6_t6y4bKs6yMieMiaolZadrLVQrhJgfla2ueFe3quIEasGqlkKha6UJBck1B1l2VVfrmq_R02I7Bf9zhJiawR-Dmy82LC9zMafD2Uy9LNQQkzxAMwUzynBqZEhGWWjOcTdF3ohzmTP_F1QvQwOO_wE_JoDE</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2474569132</pqid></control><display><type>article</type><title>Consideration of machining phenomena based on tool rotation coordinate system monitoring in thread cutting by helical interpolation thread mill</title><source>J-STAGE Free</source><source>Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals</source><creator>MATSUI, Shota ; OZAKI, Nobutoshi ; HIROGAKI, Toshiki ; AOYAMA, Eiichi ; Matsuda, Ryo</creator><creatorcontrib>MATSUI, Shota ; OZAKI, Nobutoshi ; HIROGAKI, Toshiki ; AOYAMA, Eiichi ; Matsuda, Ryo</creatorcontrib><description>This study was performed to improve the precision of a thread by deriving its radial force (thrust force) with a four-component piezoelectric dynamometer and thread cutting by helical interpolation motion using a thread mill. In addition, using a wireless holder, the display of cutting force in polar coordinates and its characteristics were considered, and the consistency of the proposed method was confirmed. The cutting force resulting from the revolution and rotation of the tool during thread cutting was analyzed based on the proposed method and position information from the wireless holder and the servo drive unit, and the phenomena occurring between the rough cutting edge and the finishing cutting edge during thread cutting were clarified. The relationship between work material hardness and cutting force was examined, and thread machining was studied.</description><identifier>ISSN: 0914-2703</identifier><identifier>EISSN: 1880-7534</identifier><identifier>DOI: 10.11420/jsat.64.260</identifier><language>jpn</language><publisher>Tokyo: The Japan Society for Abrasive Technology</publisher><subject>Cutting force ; helical interpolation ; Interpolation ; Machining ; machining center ; Piezoelectricity ; Polar coordinates ; Rotation ; screw cutting ; Servoamplifiers ; Thread cutting ; thread-mill ; Thrust</subject><ispartof>Journal of the Japan Society for Abrasive Technology, 2020/05/01, Vol.64(5), pp.260-266</ispartof><rights>2020 by The Japan Society for Abrasive Technology</rights><rights>Copyright Japan Science and Technology Agency 2020</rights><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,1877,27901,27902</link.rule.ids></links><search><creatorcontrib>MATSUI, Shota</creatorcontrib><creatorcontrib>OZAKI, Nobutoshi</creatorcontrib><creatorcontrib>HIROGAKI, Toshiki</creatorcontrib><creatorcontrib>AOYAMA, Eiichi</creatorcontrib><creatorcontrib>Matsuda, Ryo</creatorcontrib><title>Consideration of machining phenomena based on tool rotation coordinate system monitoring in thread cutting by helical interpolation thread mill</title><title>Journal of the Japan Society for Abrasive Technology</title><addtitle>JSAT</addtitle><description>This study was performed to improve the precision of a thread by deriving its radial force (thrust force) with a four-component piezoelectric dynamometer and thread cutting by helical interpolation motion using a thread mill. In addition, using a wireless holder, the display of cutting force in polar coordinates and its characteristics were considered, and the consistency of the proposed method was confirmed. The cutting force resulting from the revolution and rotation of the tool during thread cutting was analyzed based on the proposed method and position information from the wireless holder and the servo drive unit, and the phenomena occurring between the rough cutting edge and the finishing cutting edge during thread cutting were clarified. The relationship between work material hardness and cutting force was examined, and thread machining was studied.</description><subject>Cutting force</subject><subject>helical interpolation</subject><subject>Interpolation</subject><subject>Machining</subject><subject>machining center</subject><subject>Piezoelectricity</subject><subject>Polar coordinates</subject><subject>Rotation</subject><subject>screw cutting</subject><subject>Servoamplifiers</subject><subject>Thread cutting</subject><subject>thread-mill</subject><subject>Thrust</subject><issn>0914-2703</issn><issn>1880-7534</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2020</creationdate><recordtype>article</recordtype><recordid>eNo9kMtqwzAQRUVpoWnaXT9A0LVTPSw_NoUS-oJAN9kbWR7FMrLkSsoiX9FfroNDNzMw98wd5iL0SMmG0pyR5yHKtCnyDSvIFVrRqiJZKXh-jVakpnnGSsJv0V2MAyFFTQldod-td9F0EGQy3mGv8ShVb5xxBzz14PwITuJWRujwrCfvLQ4-LbTyPnTGyQQ4nmKCEY_emeTDedvMdB9AdlgdUzpP2hPuwRol7SwmCJO3i8-FG4219-hGSxvh4dLXaP_-tt9-Zrvvj6_t6y4bKs6yMieMiaolZadrLVQrhJgfla2ueFe3quIEasGqlkKha6UJBck1B1l2VVfrmq_R02I7Bf9zhJiawR-Dmy82LC9zMafD2Uy9LNQQkzxAMwUzynBqZEhGWWjOcTdF3ohzmTP_F1QvQwOO_wE_JoDE</recordid><startdate>20200501</startdate><enddate>20200501</enddate><creator>MATSUI, Shota</creator><creator>OZAKI, Nobutoshi</creator><creator>HIROGAKI, Toshiki</creator><creator>AOYAMA, Eiichi</creator><creator>Matsuda, Ryo</creator><general>The Japan Society for Abrasive Technology</general><general>Japan Science and Technology Agency</general><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20200501</creationdate><title>Consideration of machining phenomena based on tool rotation coordinate system monitoring in thread cutting by helical interpolation thread mill</title><author>MATSUI, Shota ; OZAKI, Nobutoshi ; HIROGAKI, Toshiki ; AOYAMA, Eiichi ; Matsuda, Ryo</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-j832-7402258b07df9f5cb555753abf83d9bc830e9528b1e6f9cf01ea3f3ea7d8d9f93</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>jpn</language><creationdate>2020</creationdate><topic>Cutting force</topic><topic>helical interpolation</topic><topic>Interpolation</topic><topic>Machining</topic><topic>machining center</topic><topic>Piezoelectricity</topic><topic>Polar coordinates</topic><topic>Rotation</topic><topic>screw cutting</topic><topic>Servoamplifiers</topic><topic>Thread cutting</topic><topic>thread-mill</topic><topic>Thrust</topic><toplevel>online_resources</toplevel><creatorcontrib>MATSUI, Shota</creatorcontrib><creatorcontrib>OZAKI, Nobutoshi</creatorcontrib><creatorcontrib>HIROGAKI, Toshiki</creatorcontrib><creatorcontrib>AOYAMA, Eiichi</creatorcontrib><creatorcontrib>Matsuda, Ryo</creatorcontrib><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Journal of the Japan Society for Abrasive Technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>MATSUI, Shota</au><au>OZAKI, Nobutoshi</au><au>HIROGAKI, Toshiki</au><au>AOYAMA, Eiichi</au><au>Matsuda, Ryo</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Consideration of machining phenomena based on tool rotation coordinate system monitoring in thread cutting by helical interpolation thread mill</atitle><jtitle>Journal of the Japan Society for Abrasive Technology</jtitle><addtitle>JSAT</addtitle><date>2020-05-01</date><risdate>2020</risdate><volume>64</volume><issue>5</issue><spage>260</spage><epage>266</epage><pages>260-266</pages><issn>0914-2703</issn><eissn>1880-7534</eissn><abstract>This study was performed to improve the precision of a thread by deriving its radial force (thrust force) with a four-component piezoelectric dynamometer and thread cutting by helical interpolation motion using a thread mill. In addition, using a wireless holder, the display of cutting force in polar coordinates and its characteristics were considered, and the consistency of the proposed method was confirmed. The cutting force resulting from the revolution and rotation of the tool during thread cutting was analyzed based on the proposed method and position information from the wireless holder and the servo drive unit, and the phenomena occurring between the rough cutting edge and the finishing cutting edge during thread cutting were clarified. The relationship between work material hardness and cutting force was examined, and thread machining was studied.</abstract><cop>Tokyo</cop><pub>The Japan Society for Abrasive Technology</pub><doi>10.11420/jsat.64.260</doi><tpages>7</tpages><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0914-2703 |
| ispartof | Journal of the Japan Society for Abrasive Technology, 2020/05/01, Vol.64(5), pp.260-266 |
| issn | 0914-2703 1880-7534 |
| language | jpn |
| recordid | cdi_proquest_journals_2474569132 |
| source | J-STAGE Free; Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals |
| subjects | Cutting force helical interpolation Interpolation Machining machining center Piezoelectricity Polar coordinates Rotation screw cutting Servoamplifiers Thread cutting thread-mill Thrust |
| title | Consideration of machining phenomena based on tool rotation coordinate system monitoring in thread cutting by helical interpolation thread mill |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-07T01%3A24%3A12IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_jstag&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Consideration%20of%20machining%20phenomena%20based%20on%20tool%20rotation%20coordinate%20system%20monitoring%20in%20thread%20cutting%20by%20helical%20interpolation%20thread%20mill&rft.jtitle=Journal%20of%20the%20Japan%20Society%20for%20Abrasive%20Technology&rft.au=MATSUI,%20Shota&rft.date=2020-05-01&rft.volume=64&rft.issue=5&rft.spage=260&rft.epage=266&rft.pages=260-266&rft.issn=0914-2703&rft.eissn=1880-7534&rft_id=info:doi/10.11420/jsat.64.260&rft_dat=%3Cproquest_jstag%3E2474569132%3C/proquest_jstag%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2474569132&rft_id=info:pmid/&rfr_iscdi=true |