Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis
•Gas-fired absorption heat pump for high-temperature water heating is proposed.•The system produces hot water above 90 °C with primary energy efficiency of 1.38.•Temperature lift is 75 °C that is much higher than the single-effect system.•Energy saving potential is 36.7–43.5% compared to the gas-fir...
Gespeichert in:
Veröffentlicht in: | International journal of refrigeration 2020-11, Vol.119, p.152-164 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 164 |
---|---|
container_issue | |
container_start_page | 152 |
container_title | International journal of refrigeration |
container_volume | 119 |
creator | Lu, Ding Bai, Yin Dong, Xueqiang Zhao, Yanxing Guo, Hao Gong, Maoqiong |
description | •Gas-fired absorption heat pump for high-temperature water heating is proposed.•The system produces hot water above 90 °C with primary energy efficiency of 1.38.•Temperature lift is 75 °C that is much higher than the single-effect system.•Energy saving potential is 36.7–43.5% compared to the gas-fired boilers.•Payback period is 3.0 years when applied to three typical cities of south China.
Despite being efficient water heating technologies, conventional absorption heat pumps can hardly produce hot water with temperature over 90 °C, and compressor-based systems have low primary energy efficiency. In order to fill this temperature gap and improve the energy efficiency, a gas-fired ammonia-water absorption heat pump with intermediate process is proposed to supply hot water with large temperature lift for residential and industrial applications. In addition to the ambient heat utilized in the evaporator, the proposed system recovers the exhaust heat in the intermediate evaporator, and the evaporated ammonia vapor is absorbed in the intermediate absorber to further heat the water, which is initially preheated in sequence in the condenser, rectifier and absorber. Simulation results indicate that at the ambient temperature of 20 °C, the proposed system can produce hot water with temperature over 95 °C and the obtained temperature lift is 75 °C, while the primary energy efficiency is 1.38. Obtained results indicate that the intermediate pressure of 0.7 MPa is the optimum pressure from both thermodynamic and economic aspects. Moreover, it is found that the energy saving potential of the proposed system is in range of 36.7% to 43.5%, when the comparison is made with conventional gas-fired boilers, and the average payback period is 3.0 years in three typical cities of south China. It is concluded that the proposed system is an efficient scheme for high-temperature water heating with large temperature lift. This is especially pronounced in warm regions with average ambient temperature over 5 °C. |
doi_str_mv | 10.1016/j.ijrefrig.2020.08.012 |
format | Article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2465479371</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0140700720303431</els_id><sourcerecordid>2465479371</sourcerecordid><originalsourceid>FETCH-LOGICAL-c340t-fcd86fe577d2bc562a55aabd7adaa8dc1fa2d75ec03726463a8dbc78a3bd74163</originalsourceid><addsrcrecordid>eNqFkE9r3DAQxUVpoNskXyEIerYzkv_I21NLaDaBQHtozmJWGu_KrC1Hklv220fbTc49Dbx57zHzY-xGQClAtLdD6YZAfXC7UoKEEroShPzAVqJT60JCJz6yFYgaCgWgPrHPMQ4AQkHTrdjLBmPRu0CW4zb6MCfnJ74nTHxexpnjPB9cXvY-8L3b7YtE40wB0xKI_8VE4Z_ZTbuv_BcGHCkFZ3hMiz1ynCwn4yc_ZgknPByji1fsosdDpOu3ecme73_8vnsonn5uHu--PxWmqiEVvbFd21OjlJVb07QSmwZxaxVaxM4a0aO0qiEDlZJt3VZZ3BrVYZU9tWirS_bl3DsH_7JQTHrwS8hHRC3rtqnVulIiu9qzywQfY8ao5-BGDEctQJ_w6kG_49UnvBo6nfHm4LdzkPIPfxwFHY2jyZDNME3S1rv_VbwCSeOKGg</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2465479371</pqid></control><display><type>article</type><title>Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis</title><source>Elsevier ScienceDirect Journals</source><creator>Lu, Ding ; Bai, Yin ; Dong, Xueqiang ; Zhao, Yanxing ; Guo, Hao ; Gong, Maoqiong</creator><creatorcontrib>Lu, Ding ; Bai, Yin ; Dong, Xueqiang ; Zhao, Yanxing ; Guo, Hao ; Gong, Maoqiong</creatorcontrib><description>•Gas-fired absorption heat pump for high-temperature water heating is proposed.•The system produces hot water above 90 °C with primary energy efficiency of 1.38.•Temperature lift is 75 °C that is much higher than the single-effect system.•Energy saving potential is 36.7–43.5% compared to the gas-fired boilers.•Payback period is 3.0 years when applied to three typical cities of south China.
Despite being efficient water heating technologies, conventional absorption heat pumps can hardly produce hot water with temperature over 90 °C, and compressor-based systems have low primary energy efficiency. In order to fill this temperature gap and improve the energy efficiency, a gas-fired ammonia-water absorption heat pump with intermediate process is proposed to supply hot water with large temperature lift for residential and industrial applications. In addition to the ambient heat utilized in the evaporator, the proposed system recovers the exhaust heat in the intermediate evaporator, and the evaporated ammonia vapor is absorbed in the intermediate absorber to further heat the water, which is initially preheated in sequence in the condenser, rectifier and absorber. Simulation results indicate that at the ambient temperature of 20 °C, the proposed system can produce hot water with temperature over 95 °C and the obtained temperature lift is 75 °C, while the primary energy efficiency is 1.38. Obtained results indicate that the intermediate pressure of 0.7 MPa is the optimum pressure from both thermodynamic and economic aspects. Moreover, it is found that the energy saving potential of the proposed system is in range of 36.7% to 43.5%, when the comparison is made with conventional gas-fired boilers, and the average payback period is 3.0 years in three typical cities of south China. It is concluded that the proposed system is an efficient scheme for high-temperature water heating with large temperature lift. This is especially pronounced in warm regions with average ambient temperature over 5 °C.</description><identifier>ISSN: 0140-7007</identifier><identifier>EISSN: 1879-2081</identifier><identifier>DOI: 10.1016/j.ijrefrig.2020.08.012</identifier><language>eng</language><publisher>Paris: Elsevier Ltd</publisher><subject>Absorbers ; Absorption heat pump ; Ambient temperature ; Ammonia ; Analyse thermodynamique et économique ; Boilers ; Chauffage de l’eau à haute température ; Economic analysis ; Economic conditions ; Evaporation ; Evaporators ; Exhaust systems ; Gaz naturel ; Heat pumps ; Heat transfer ; High temperature ; High-temperature water heating ; Hot water ; Industrial applications ; Natural gas ; Parametric statistics ; Pompe à chaleur à absorption ; Pumps ; Récupération de chaleur perdue ; Thermodynamic and economic analysis ; Thermodynamics ; Waste heat recovery ; Water absorption ; Water heating</subject><ispartof>International journal of refrigeration, 2020-11, Vol.119, p.152-164</ispartof><rights>2020</rights><rights>Copyright Elsevier Science Ltd. Nov 2020</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c340t-fcd86fe577d2bc562a55aabd7adaa8dc1fa2d75ec03726463a8dbc78a3bd74163</citedby><cites>FETCH-LOGICAL-c340t-fcd86fe577d2bc562a55aabd7adaa8dc1fa2d75ec03726463a8dbc78a3bd74163</cites><orcidid>0000-0001-7491-900X</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S0140700720303431$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3537,27903,27904,65309</link.rule.ids></links><search><creatorcontrib>Lu, Ding</creatorcontrib><creatorcontrib>Bai, Yin</creatorcontrib><creatorcontrib>Dong, Xueqiang</creatorcontrib><creatorcontrib>Zhao, Yanxing</creatorcontrib><creatorcontrib>Guo, Hao</creatorcontrib><creatorcontrib>Gong, Maoqiong</creatorcontrib><title>Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis</title><title>International journal of refrigeration</title><description>•Gas-fired absorption heat pump for high-temperature water heating is proposed.•The system produces hot water above 90 °C with primary energy efficiency of 1.38.•Temperature lift is 75 °C that is much higher than the single-effect system.•Energy saving potential is 36.7–43.5% compared to the gas-fired boilers.•Payback period is 3.0 years when applied to three typical cities of south China.
Despite being efficient water heating technologies, conventional absorption heat pumps can hardly produce hot water with temperature over 90 °C, and compressor-based systems have low primary energy efficiency. In order to fill this temperature gap and improve the energy efficiency, a gas-fired ammonia-water absorption heat pump with intermediate process is proposed to supply hot water with large temperature lift for residential and industrial applications. In addition to the ambient heat utilized in the evaporator, the proposed system recovers the exhaust heat in the intermediate evaporator, and the evaporated ammonia vapor is absorbed in the intermediate absorber to further heat the water, which is initially preheated in sequence in the condenser, rectifier and absorber. Simulation results indicate that at the ambient temperature of 20 °C, the proposed system can produce hot water with temperature over 95 °C and the obtained temperature lift is 75 °C, while the primary energy efficiency is 1.38. Obtained results indicate that the intermediate pressure of 0.7 MPa is the optimum pressure from both thermodynamic and economic aspects. Moreover, it is found that the energy saving potential of the proposed system is in range of 36.7% to 43.5%, when the comparison is made with conventional gas-fired boilers, and the average payback period is 3.0 years in three typical cities of south China. It is concluded that the proposed system is an efficient scheme for high-temperature water heating with large temperature lift. This is especially pronounced in warm regions with average ambient temperature over 5 °C.</description><subject>Absorbers</subject><subject>Absorption heat pump</subject><subject>Ambient temperature</subject><subject>Ammonia</subject><subject>Analyse thermodynamique et économique</subject><subject>Boilers</subject><subject>Chauffage de l’eau à haute température</subject><subject>Economic analysis</subject><subject>Economic conditions</subject><subject>Evaporation</subject><subject>Evaporators</subject><subject>Exhaust systems</subject><subject>Gaz naturel</subject><subject>Heat pumps</subject><subject>Heat transfer</subject><subject>High temperature</subject><subject>High-temperature water heating</subject><subject>Hot water</subject><subject>Industrial applications</subject><subject>Natural gas</subject><subject>Parametric statistics</subject><subject>Pompe à chaleur à absorption</subject><subject>Pumps</subject><subject>Récupération de chaleur perdue</subject><subject>Thermodynamic and economic analysis</subject><subject>Thermodynamics</subject><subject>Waste heat recovery</subject><subject>Water absorption</subject><subject>Water heating</subject><issn>0140-7007</issn><issn>1879-2081</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2020</creationdate><recordtype>article</recordtype><recordid>eNqFkE9r3DAQxUVpoNskXyEIerYzkv_I21NLaDaBQHtozmJWGu_KrC1Hklv220fbTc49Dbx57zHzY-xGQClAtLdD6YZAfXC7UoKEEroShPzAVqJT60JCJz6yFYgaCgWgPrHPMQ4AQkHTrdjLBmPRu0CW4zb6MCfnJ74nTHxexpnjPB9cXvY-8L3b7YtE40wB0xKI_8VE4Z_ZTbuv_BcGHCkFZ3hMiz1ynCwn4yc_ZgknPByji1fsosdDpOu3ecme73_8vnsonn5uHu--PxWmqiEVvbFd21OjlJVb07QSmwZxaxVaxM4a0aO0qiEDlZJt3VZZ3BrVYZU9tWirS_bl3DsH_7JQTHrwS8hHRC3rtqnVulIiu9qzywQfY8ao5-BGDEctQJ_w6kG_49UnvBo6nfHm4LdzkPIPfxwFHY2jyZDNME3S1rv_VbwCSeOKGg</recordid><startdate>202011</startdate><enddate>202011</enddate><creator>Lu, Ding</creator><creator>Bai, Yin</creator><creator>Dong, Xueqiang</creator><creator>Zhao, Yanxing</creator><creator>Guo, Hao</creator><creator>Gong, Maoqiong</creator><general>Elsevier Ltd</general><general>Elsevier Science Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7TB</scope><scope>8FD</scope><scope>FR3</scope><orcidid>https://orcid.org/0000-0001-7491-900X</orcidid></search><sort><creationdate>202011</creationdate><title>Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis</title><author>Lu, Ding ; Bai, Yin ; Dong, Xueqiang ; Zhao, Yanxing ; Guo, Hao ; Gong, Maoqiong</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c340t-fcd86fe577d2bc562a55aabd7adaa8dc1fa2d75ec03726463a8dbc78a3bd74163</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2020</creationdate><topic>Absorbers</topic><topic>Absorption heat pump</topic><topic>Ambient temperature</topic><topic>Ammonia</topic><topic>Analyse thermodynamique et économique</topic><topic>Boilers</topic><topic>Chauffage de l’eau à haute température</topic><topic>Economic analysis</topic><topic>Economic conditions</topic><topic>Evaporation</topic><topic>Evaporators</topic><topic>Exhaust systems</topic><topic>Gaz naturel</topic><topic>Heat pumps</topic><topic>Heat transfer</topic><topic>High temperature</topic><topic>High-temperature water heating</topic><topic>Hot water</topic><topic>Industrial applications</topic><topic>Natural gas</topic><topic>Parametric statistics</topic><topic>Pompe à chaleur à absorption</topic><topic>Pumps</topic><topic>Récupération de chaleur perdue</topic><topic>Thermodynamic and economic analysis</topic><topic>Thermodynamics</topic><topic>Waste heat recovery</topic><topic>Water absorption</topic><topic>Water heating</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Lu, Ding</creatorcontrib><creatorcontrib>Bai, Yin</creatorcontrib><creatorcontrib>Dong, Xueqiang</creatorcontrib><creatorcontrib>Zhao, Yanxing</creatorcontrib><creatorcontrib>Guo, Hao</creatorcontrib><creatorcontrib>Gong, Maoqiong</creatorcontrib><collection>CrossRef</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><jtitle>International journal of refrigeration</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Lu, Ding</au><au>Bai, Yin</au><au>Dong, Xueqiang</au><au>Zhao, Yanxing</au><au>Guo, Hao</au><au>Gong, Maoqiong</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis</atitle><jtitle>International journal of refrigeration</jtitle><date>2020-11</date><risdate>2020</risdate><volume>119</volume><spage>152</spage><epage>164</epage><pages>152-164</pages><issn>0140-7007</issn><eissn>1879-2081</eissn><abstract>•Gas-fired absorption heat pump for high-temperature water heating is proposed.•The system produces hot water above 90 °C with primary energy efficiency of 1.38.•Temperature lift is 75 °C that is much higher than the single-effect system.•Energy saving potential is 36.7–43.5% compared to the gas-fired boilers.•Payback period is 3.0 years when applied to three typical cities of south China.
Despite being efficient water heating technologies, conventional absorption heat pumps can hardly produce hot water with temperature over 90 °C, and compressor-based systems have low primary energy efficiency. In order to fill this temperature gap and improve the energy efficiency, a gas-fired ammonia-water absorption heat pump with intermediate process is proposed to supply hot water with large temperature lift for residential and industrial applications. In addition to the ambient heat utilized in the evaporator, the proposed system recovers the exhaust heat in the intermediate evaporator, and the evaporated ammonia vapor is absorbed in the intermediate absorber to further heat the water, which is initially preheated in sequence in the condenser, rectifier and absorber. Simulation results indicate that at the ambient temperature of 20 °C, the proposed system can produce hot water with temperature over 95 °C and the obtained temperature lift is 75 °C, while the primary energy efficiency is 1.38. Obtained results indicate that the intermediate pressure of 0.7 MPa is the optimum pressure from both thermodynamic and economic aspects. Moreover, it is found that the energy saving potential of the proposed system is in range of 36.7% to 43.5%, when the comparison is made with conventional gas-fired boilers, and the average payback period is 3.0 years in three typical cities of south China. It is concluded that the proposed system is an efficient scheme for high-temperature water heating with large temperature lift. This is especially pronounced in warm regions with average ambient temperature over 5 °C.</abstract><cop>Paris</cop><pub>Elsevier Ltd</pub><doi>10.1016/j.ijrefrig.2020.08.012</doi><tpages>13</tpages><orcidid>https://orcid.org/0000-0001-7491-900X</orcidid></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0140-7007 |
ispartof | International journal of refrigeration, 2020-11, Vol.119, p.152-164 |
issn | 0140-7007 1879-2081 |
language | eng |
recordid | cdi_proquest_journals_2465479371 |
source | Elsevier ScienceDirect Journals |
subjects | Absorbers Absorption heat pump Ambient temperature Ammonia Analyse thermodynamique et économique Boilers Chauffage de l’eau à haute température Economic analysis Economic conditions Evaporation Evaporators Exhaust systems Gaz naturel Heat pumps Heat transfer High temperature High-temperature water heating Hot water Industrial applications Natural gas Parametric statistics Pompe à chaleur à absorption Pumps Récupération de chaleur perdue Thermodynamic and economic analysis Thermodynamics Waste heat recovery Water absorption Water heating |
title | Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-28T05%3A08%3A20IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Gas-fired%20absorption%20heat%20pump%20applied%20for%20high-temperature%20water%20heating:%20Parametric%20study%20and%20economic%20analysis&rft.jtitle=International%20journal%20of%20refrigeration&rft.au=Lu,%20Ding&rft.date=2020-11&rft.volume=119&rft.spage=152&rft.epage=164&rft.pages=152-164&rft.issn=0140-7007&rft.eissn=1879-2081&rft_id=info:doi/10.1016/j.ijrefrig.2020.08.012&rft_dat=%3Cproquest_cross%3E2465479371%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2465479371&rft_id=info:pmid/&rft_els_id=S0140700720303431&rfr_iscdi=true |