Hot deformation behaviors and three-dimensional processing map of a nickel-based superalloy with initial dendrite microstructure

Investigating the initial upsetting process via inducing dynamic recrystallization (DRX) to update dendrite microstructure is of significant profound for obtaining homogeneous microstructure while avoiding defects such as cracking and severe texture etc. The hot deformation behaviors of an as-cast n...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of alloys and compounds 2020-05, Vol.822, p.153735, Article 153735
Hauptverfasser: Shen, J.Y., Hu, L.X., Sun, Y., Feng, X.Y., Fang, A.W., Wan, Z.P.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue
container_start_page 153735
container_title Journal of alloys and compounds
container_volume 822
creator Shen, J.Y.
Hu, L.X.
Sun, Y.
Feng, X.Y.
Fang, A.W.
Wan, Z.P.
description Investigating the initial upsetting process via inducing dynamic recrystallization (DRX) to update dendrite microstructure is of significant profound for obtaining homogeneous microstructure while avoiding defects such as cracking and severe texture etc. The hot deformation behaviors of an as-cast nickel-based superalloy with dendrite microstructure were investigated by uniaxial compression experiments performed at temperatures of 1040–1160 °C (across γˊ-solvus) and strain rates of 0.001–1 s−1. There exists a high positive correlation between peak flow stress and Zener-Hollomon parameter. The three-dimensional (3D) distributions of strain rate sensitivity (m) and power dissipation efficiency (η) were sequentially established, which facilitates thoroughly understanding the effect of deformation parameters (DPs) like temperature, strain rate and strain on them. Based on the processing map (PM) validated and microstructure evolution, the optimized hot working windows of studied alloy, in which an intense DRX happened, were identified as: 1040–1105 °C 0.0032–0.08 s−1, 1105–1124 °C 0.0018–0.16 s−1, and 1148–1160 °C 0.2–1 s−1. It provided a reasonable cogging operation process for homogenizing microstructure of the ingot. Worthy of note is that continuous dynamic recrystallization (cDRX) and discontinuous dynamic recrystallization (dDRX) concurrently occurred at low temperature, whilst the dDRX was predominant at sub-/super-solvus temperature, resulted in the discontinuous softening. The nucleation of γˊ nano-twin was implemented by the 1/6 type of twinning partials which dissociated from a perfect dislocation, gliding on (111) crystal plane at sub-solvus temperature. As a result, the γˊ precipitates were coherently embedded in γ matrix. [Display omitted] •The discontinuous flow softening occurred at sub-/super-solvus temperature and high strain rate.•The 3D distribution of m, η and PM was sequentially established.•DRX, induced by the severe distortion of dendrites, played a considerable role in homogenizing microstructure.•Both cDRX and dDRX occurred concurrently at low temperature, whilst dDRX was predominant at sub-/super-solvus temperature.•The nucleation of γˊ nano-twin at sub-solvus temperature was clarified.
doi_str_mv 10.1016/j.jallcom.2020.153735
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2377703763</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0925838820300980</els_id><sourcerecordid>2377703763</sourcerecordid><originalsourceid>FETCH-LOGICAL-c337t-106bf0d1d885d94d7cbce8e9f6ecfdc3d70646a61b6a3cc92312325db443c29d3</originalsourceid><addsrcrecordid>eNqFkFFLwzAUhYMoOKc_QQj43Jk0bdI-iQx1wsAXfQ5pcutS22Ym6WRv_nQztnefLtx7zuGeD6FbShaUUH7fLTrV99oNi5zkaVcywcozNKOVYFnBeX2OZqTOy6xiVXWJrkLoCCG0ZnSGflcuYgOt84OK1o24gY3aWecDVqPBceMBMmMHGEO6qh5vvdMQgh0_8aC22LVY4dHqL-izRgUwOExb8Okft8c_Nm6wHW20yWhgNN5GwIPV3oXoJx0nD9foolV9gJvTnKOP56f35Spbv728Lh_XmWZMxIwS3rTEUFNVpakLI3SjoYK65aBbo5kRhBdccdpwxbSuc0ZzlpemKQqm89qwObo75qYC3xOEKDs3-dQoyJwJIQgTnCVVeVQdXgweWrn1dlB-LymRB9iykyfY8gBbHmEn38PRB6nCzoKXQVsYNRjrQUdpnP0n4Q9Pgo5b</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2377703763</pqid></control><display><type>article</type><title>Hot deformation behaviors and three-dimensional processing map of a nickel-based superalloy with initial dendrite microstructure</title><source>Elsevier ScienceDirect Journals</source><creator>Shen, J.Y. ; Hu, L.X. ; Sun, Y. ; Feng, X.Y. ; Fang, A.W. ; Wan, Z.P.</creator><creatorcontrib>Shen, J.Y. ; Hu, L.X. ; Sun, Y. ; Feng, X.Y. ; Fang, A.W. ; Wan, Z.P.</creatorcontrib><description>Investigating the initial upsetting process via inducing dynamic recrystallization (DRX) to update dendrite microstructure is of significant profound for obtaining homogeneous microstructure while avoiding defects such as cracking and severe texture etc. The hot deformation behaviors of an as-cast nickel-based superalloy with dendrite microstructure were investigated by uniaxial compression experiments performed at temperatures of 1040–1160 °C (across γˊ-solvus) and strain rates of 0.001–1 s−1. There exists a high positive correlation between peak flow stress and Zener-Hollomon parameter. The three-dimensional (3D) distributions of strain rate sensitivity (m) and power dissipation efficiency (η) were sequentially established, which facilitates thoroughly understanding the effect of deformation parameters (DPs) like temperature, strain rate and strain on them. Based on the processing map (PM) validated and microstructure evolution, the optimized hot working windows of studied alloy, in which an intense DRX happened, were identified as: 1040–1105 °C 0.0032–0.08 s−1, 1105–1124 °C 0.0018–0.16 s−1, and 1148–1160 °C 0.2–1 s−1. It provided a reasonable cogging operation process for homogenizing microstructure of the ingot. Worthy of note is that continuous dynamic recrystallization (cDRX) and discontinuous dynamic recrystallization (dDRX) concurrently occurred at low temperature, whilst the dDRX was predominant at sub-/super-solvus temperature, resulted in the discontinuous softening. The nucleation of γˊ nano-twin was implemented by the 1/6 type of twinning partials which dissociated from a perfect dislocation, gliding on (111) crystal plane at sub-solvus temperature. As a result, the γˊ precipitates were coherently embedded in γ matrix. [Display omitted] •The discontinuous flow softening occurred at sub-/super-solvus temperature and high strain rate.•The 3D distribution of m, η and PM was sequentially established.•DRX, induced by the severe distortion of dendrites, played a considerable role in homogenizing microstructure.•Both cDRX and dDRX occurred concurrently at low temperature, whilst dDRX was predominant at sub-/super-solvus temperature.•The nucleation of γˊ nano-twin at sub-solvus temperature was clarified.</description><identifier>ISSN: 0925-8388</identifier><identifier>EISSN: 1873-4669</identifier><identifier>DOI: 10.1016/j.jallcom.2020.153735</identifier><language>eng</language><publisher>Lausanne: Elsevier B.V</publisher><subject>3D processing map ; Cogging ; Crystal defects ; Crystal dislocations ; Deformation effects ; Dendrite microstructure ; Dendritic structure ; DRX ; Dynamic recrystallization ; Gliding ; Heat treating ; Hot deformation behavior ; Hot working ; Ingot casting ; Low temperature ; Microstructure ; Nickel ; Nickel base alloys ; Nickel-based superalloys ; Nucleation ; Parameter sensitivity ; Power efficiency ; Precipitates ; Pressure casting ; Process mapping ; Strain rate sensitivity ; Superalloys ; Temperature ; Twinning ; Yield strength</subject><ispartof>Journal of alloys and compounds, 2020-05, Vol.822, p.153735, Article 153735</ispartof><rights>2020</rights><rights>Copyright Elsevier BV May 5, 2020</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c337t-106bf0d1d885d94d7cbce8e9f6ecfdc3d70646a61b6a3cc92312325db443c29d3</citedby><cites>FETCH-LOGICAL-c337t-106bf0d1d885d94d7cbce8e9f6ecfdc3d70646a61b6a3cc92312325db443c29d3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S0925838820300980$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3537,27901,27902,65534</link.rule.ids></links><search><creatorcontrib>Shen, J.Y.</creatorcontrib><creatorcontrib>Hu, L.X.</creatorcontrib><creatorcontrib>Sun, Y.</creatorcontrib><creatorcontrib>Feng, X.Y.</creatorcontrib><creatorcontrib>Fang, A.W.</creatorcontrib><creatorcontrib>Wan, Z.P.</creatorcontrib><title>Hot deformation behaviors and three-dimensional processing map of a nickel-based superalloy with initial dendrite microstructure</title><title>Journal of alloys and compounds</title><description>Investigating the initial upsetting process via inducing dynamic recrystallization (DRX) to update dendrite microstructure is of significant profound for obtaining homogeneous microstructure while avoiding defects such as cracking and severe texture etc. The hot deformation behaviors of an as-cast nickel-based superalloy with dendrite microstructure were investigated by uniaxial compression experiments performed at temperatures of 1040–1160 °C (across γˊ-solvus) and strain rates of 0.001–1 s−1. There exists a high positive correlation between peak flow stress and Zener-Hollomon parameter. The three-dimensional (3D) distributions of strain rate sensitivity (m) and power dissipation efficiency (η) were sequentially established, which facilitates thoroughly understanding the effect of deformation parameters (DPs) like temperature, strain rate and strain on them. Based on the processing map (PM) validated and microstructure evolution, the optimized hot working windows of studied alloy, in which an intense DRX happened, were identified as: 1040–1105 °C 0.0032–0.08 s−1, 1105–1124 °C 0.0018–0.16 s−1, and 1148–1160 °C 0.2–1 s−1. It provided a reasonable cogging operation process for homogenizing microstructure of the ingot. Worthy of note is that continuous dynamic recrystallization (cDRX) and discontinuous dynamic recrystallization (dDRX) concurrently occurred at low temperature, whilst the dDRX was predominant at sub-/super-solvus temperature, resulted in the discontinuous softening. The nucleation of γˊ nano-twin was implemented by the 1/6 type of twinning partials which dissociated from a perfect dislocation, gliding on (111) crystal plane at sub-solvus temperature. As a result, the γˊ precipitates were coherently embedded in γ matrix. [Display omitted] •The discontinuous flow softening occurred at sub-/super-solvus temperature and high strain rate.•The 3D distribution of m, η and PM was sequentially established.•DRX, induced by the severe distortion of dendrites, played a considerable role in homogenizing microstructure.•Both cDRX and dDRX occurred concurrently at low temperature, whilst dDRX was predominant at sub-/super-solvus temperature.•The nucleation of γˊ nano-twin at sub-solvus temperature was clarified.</description><subject>3D processing map</subject><subject>Cogging</subject><subject>Crystal defects</subject><subject>Crystal dislocations</subject><subject>Deformation effects</subject><subject>Dendrite microstructure</subject><subject>Dendritic structure</subject><subject>DRX</subject><subject>Dynamic recrystallization</subject><subject>Gliding</subject><subject>Heat treating</subject><subject>Hot deformation behavior</subject><subject>Hot working</subject><subject>Ingot casting</subject><subject>Low temperature</subject><subject>Microstructure</subject><subject>Nickel</subject><subject>Nickel base alloys</subject><subject>Nickel-based superalloys</subject><subject>Nucleation</subject><subject>Parameter sensitivity</subject><subject>Power efficiency</subject><subject>Precipitates</subject><subject>Pressure casting</subject><subject>Process mapping</subject><subject>Strain rate sensitivity</subject><subject>Superalloys</subject><subject>Temperature</subject><subject>Twinning</subject><subject>Yield strength</subject><issn>0925-8388</issn><issn>1873-4669</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2020</creationdate><recordtype>article</recordtype><recordid>eNqFkFFLwzAUhYMoOKc_QQj43Jk0bdI-iQx1wsAXfQ5pcutS22Ym6WRv_nQztnefLtx7zuGeD6FbShaUUH7fLTrV99oNi5zkaVcywcozNKOVYFnBeX2OZqTOy6xiVXWJrkLoCCG0ZnSGflcuYgOt84OK1o24gY3aWecDVqPBceMBMmMHGEO6qh5vvdMQgh0_8aC22LVY4dHqL-izRgUwOExb8Okft8c_Nm6wHW20yWhgNN5GwIPV3oXoJx0nD9foolV9gJvTnKOP56f35Spbv728Lh_XmWZMxIwS3rTEUFNVpakLI3SjoYK65aBbo5kRhBdccdpwxbSuc0ZzlpemKQqm89qwObo75qYC3xOEKDs3-dQoyJwJIQgTnCVVeVQdXgweWrn1dlB-LymRB9iykyfY8gBbHmEn38PRB6nCzoKXQVsYNRjrQUdpnP0n4Q9Pgo5b</recordid><startdate>20200505</startdate><enddate>20200505</enddate><creator>Shen, J.Y.</creator><creator>Hu, L.X.</creator><creator>Sun, Y.</creator><creator>Feng, X.Y.</creator><creator>Fang, A.W.</creator><creator>Wan, Z.P.</creator><general>Elsevier B.V</general><general>Elsevier BV</general><scope>AAYXX</scope><scope>CITATION</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20200505</creationdate><title>Hot deformation behaviors and three-dimensional processing map of a nickel-based superalloy with initial dendrite microstructure</title><author>Shen, J.Y. ; Hu, L.X. ; Sun, Y. ; Feng, X.Y. ; Fang, A.W. ; Wan, Z.P.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c337t-106bf0d1d885d94d7cbce8e9f6ecfdc3d70646a61b6a3cc92312325db443c29d3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2020</creationdate><topic>3D processing map</topic><topic>Cogging</topic><topic>Crystal defects</topic><topic>Crystal dislocations</topic><topic>Deformation effects</topic><topic>Dendrite microstructure</topic><topic>Dendritic structure</topic><topic>DRX</topic><topic>Dynamic recrystallization</topic><topic>Gliding</topic><topic>Heat treating</topic><topic>Hot deformation behavior</topic><topic>Hot working</topic><topic>Ingot casting</topic><topic>Low temperature</topic><topic>Microstructure</topic><topic>Nickel</topic><topic>Nickel base alloys</topic><topic>Nickel-based superalloys</topic><topic>Nucleation</topic><topic>Parameter sensitivity</topic><topic>Power efficiency</topic><topic>Precipitates</topic><topic>Pressure casting</topic><topic>Process mapping</topic><topic>Strain rate sensitivity</topic><topic>Superalloys</topic><topic>Temperature</topic><topic>Twinning</topic><topic>Yield strength</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Shen, J.Y.</creatorcontrib><creatorcontrib>Hu, L.X.</creatorcontrib><creatorcontrib>Sun, Y.</creatorcontrib><creatorcontrib>Feng, X.Y.</creatorcontrib><creatorcontrib>Fang, A.W.</creatorcontrib><creatorcontrib>Wan, Z.P.</creatorcontrib><collection>CrossRef</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Journal of alloys and compounds</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Shen, J.Y.</au><au>Hu, L.X.</au><au>Sun, Y.</au><au>Feng, X.Y.</au><au>Fang, A.W.</au><au>Wan, Z.P.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Hot deformation behaviors and three-dimensional processing map of a nickel-based superalloy with initial dendrite microstructure</atitle><jtitle>Journal of alloys and compounds</jtitle><date>2020-05-05</date><risdate>2020</risdate><volume>822</volume><spage>153735</spage><pages>153735-</pages><artnum>153735</artnum><issn>0925-8388</issn><eissn>1873-4669</eissn><abstract>Investigating the initial upsetting process via inducing dynamic recrystallization (DRX) to update dendrite microstructure is of significant profound for obtaining homogeneous microstructure while avoiding defects such as cracking and severe texture etc. The hot deformation behaviors of an as-cast nickel-based superalloy with dendrite microstructure were investigated by uniaxial compression experiments performed at temperatures of 1040–1160 °C (across γˊ-solvus) and strain rates of 0.001–1 s−1. There exists a high positive correlation between peak flow stress and Zener-Hollomon parameter. The three-dimensional (3D) distributions of strain rate sensitivity (m) and power dissipation efficiency (η) were sequentially established, which facilitates thoroughly understanding the effect of deformation parameters (DPs) like temperature, strain rate and strain on them. Based on the processing map (PM) validated and microstructure evolution, the optimized hot working windows of studied alloy, in which an intense DRX happened, were identified as: 1040–1105 °C 0.0032–0.08 s−1, 1105–1124 °C 0.0018–0.16 s−1, and 1148–1160 °C 0.2–1 s−1. It provided a reasonable cogging operation process for homogenizing microstructure of the ingot. Worthy of note is that continuous dynamic recrystallization (cDRX) and discontinuous dynamic recrystallization (dDRX) concurrently occurred at low temperature, whilst the dDRX was predominant at sub-/super-solvus temperature, resulted in the discontinuous softening. The nucleation of γˊ nano-twin was implemented by the 1/6 type of twinning partials which dissociated from a perfect dislocation, gliding on (111) crystal plane at sub-solvus temperature. As a result, the γˊ precipitates were coherently embedded in γ matrix. [Display omitted] •The discontinuous flow softening occurred at sub-/super-solvus temperature and high strain rate.•The 3D distribution of m, η and PM was sequentially established.•DRX, induced by the severe distortion of dendrites, played a considerable role in homogenizing microstructure.•Both cDRX and dDRX occurred concurrently at low temperature, whilst dDRX was predominant at sub-/super-solvus temperature.•The nucleation of γˊ nano-twin at sub-solvus temperature was clarified.</abstract><cop>Lausanne</cop><pub>Elsevier B.V</pub><doi>10.1016/j.jallcom.2020.153735</doi></addata></record>
fulltext fulltext
identifier ISSN: 0925-8388
ispartof Journal of alloys and compounds, 2020-05, Vol.822, p.153735, Article 153735
issn 0925-8388
1873-4669
language eng
recordid cdi_proquest_journals_2377703763
source Elsevier ScienceDirect Journals
subjects 3D processing map
Cogging
Crystal defects
Crystal dislocations
Deformation effects
Dendrite microstructure
Dendritic structure
DRX
Dynamic recrystallization
Gliding
Heat treating
Hot deformation behavior
Hot working
Ingot casting
Low temperature
Microstructure
Nickel
Nickel base alloys
Nickel-based superalloys
Nucleation
Parameter sensitivity
Power efficiency
Precipitates
Pressure casting
Process mapping
Strain rate sensitivity
Superalloys
Temperature
Twinning
Yield strength
title Hot deformation behaviors and three-dimensional processing map of a nickel-based superalloy with initial dendrite microstructure
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-16T02%3A37%3A00IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Hot%20deformation%20behaviors%20and%20three-dimensional%20processing%20map%20of%20a%20nickel-based%20superalloy%20with%20initial%20dendrite%20microstructure&rft.jtitle=Journal%20of%20alloys%20and%20compounds&rft.au=Shen,%20J.Y.&rft.date=2020-05-05&rft.volume=822&rft.spage=153735&rft.pages=153735-&rft.artnum=153735&rft.issn=0925-8388&rft.eissn=1873-4669&rft_id=info:doi/10.1016/j.jallcom.2020.153735&rft_dat=%3Cproquest_cross%3E2377703763%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2377703763&rft_id=info:pmid/&rft_els_id=S0925838820300980&rfr_iscdi=true