Microstructure and mechanical properties of Cu-B4C and CuAl-B4C composites produced by hot pressing
Cu matrix composite materials reinforced with B 4 C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) and also CuAl matrix composites with 13 wt% Al reinforced with B 4 C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) were fabricated by hot pres...
Gespeichert in:
| Veröffentlicht in: | Rare metals 2019-12, Vol.38 (12), p.1169-1177 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 1177 |
|---|---|
| container_issue | 12 |
| container_start_page | 1169 |
| container_title | Rare metals |
| container_volume | 38 |
| creator | Balalan, Zulkuf Gulan, Furkan |
| description | Cu matrix composite materials reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) and also CuAl matrix composites with 13 wt% Al reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) were fabricated by hot pressing (HP) and a powder metallurgy (PM) process. Experimental samples were produced by keeping them at 880 °C at the constant pressure of 2.3 × 10
8
Pa for 6 min. The density, microstructure and mechanical properties of the produced samples were examined. The microstructure and phase examinations were carried out by scanning electron microscope (SEM) and optical microscope (OM), energy-dispersive spectrometer (EDS) and X-ray diffractometer (XRD) analysis. The hardness measurements, three-point bending test and impact test were conducted to determine the mechanical properties. As a result of the examinations, it was observed that the relative density values decreased with the increasing content of B
4
C and provided a relatively effective bonding. Moreover, it was homogeneously distributed in the produced specimens. Consequently, there was a considerable increase in the hardness and the bending strength of CuAl matrix specimens with Al addition. |
| doi_str_mv | 10.1007/s12598-019-01287-2 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2318812096</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2267282040</sourcerecordid><originalsourceid>FETCH-LOGICAL-c347t-b9beb61c523fcc914c024438670d231ec8f814f9eeefc72e04c380252e8f99d63</originalsourceid><addsrcrecordid>eNp9kD1PwzAQhi0EEqXwB5giMRvOjpPYY4n4kopYYLaSy7lN1SbBTgb-PW6LxNbBsk963rvzw9itgHsBUDwEITOjOQgTj9QFl2dsJnRe8ELo7Dy-AQSHTIpLdhXCBkCpPIcZw_cWfR9GP-E4eUqqrkl2hOuqa7HaJoPvB_JjSyHpXVJO_FGVB6acFttDgf1u6EM7RiLCzYTUJPVPsu7HWFMIbbe6Zheu2ga6-bvn7Ov56bN85cuPl7dyseSYqmLktampzgVmMnWIRigEqVQaPwGNTAWhdlooZ4jIYSEJFKYaZCZJO2OaPJ2zu2PfuMj3RGG0m37yXRxpY15rIcGcpmReSC1BQaTkkdrbCZ6cHXy7q_yPFWD3yu1RuY3K7UF5nDFn6TEUItytyP-3PpH6BTrbgto</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2267282040</pqid></control><display><type>article</type><title>Microstructure and mechanical properties of Cu-B4C and CuAl-B4C composites produced by hot pressing</title><source>Alma/SFX Local Collection</source><source>SpringerLink Journals - AutoHoldings</source><creator>Balalan, Zulkuf ; Gulan, Furkan</creator><creatorcontrib>Balalan, Zulkuf ; Gulan, Furkan</creatorcontrib><description>Cu matrix composite materials reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) and also CuAl matrix composites with 13 wt% Al reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) were fabricated by hot pressing (HP) and a powder metallurgy (PM) process. Experimental samples were produced by keeping them at 880 °C at the constant pressure of 2.3 × 10
8
Pa for 6 min. The density, microstructure and mechanical properties of the produced samples were examined. The microstructure and phase examinations were carried out by scanning electron microscope (SEM) and optical microscope (OM), energy-dispersive spectrometer (EDS) and X-ray diffractometer (XRD) analysis. The hardness measurements, three-point bending test and impact test were conducted to determine the mechanical properties. As a result of the examinations, it was observed that the relative density values decreased with the increasing content of B
4
C and provided a relatively effective bonding. Moreover, it was homogeneously distributed in the produced specimens. Consequently, there was a considerable increase in the hardness and the bending strength of CuAl matrix specimens with Al addition.</description><identifier>ISSN: 1001-0521</identifier><identifier>EISSN: 1867-7185</identifier><identifier>DOI: 10.1007/s12598-019-01287-2</identifier><language>eng</language><publisher>Beijing: Nonferrous Metals Society of China</publisher><subject>Aluminum matrix composites ; Bend strength ; Biomaterials ; Boron carbide ; Chemistry and Materials Science ; Composite materials ; Densification ; Density ; Energy ; Hardness ; Hot pressing ; Impact tests ; Materials Engineering ; Materials Science ; Mechanical properties ; Metal matrix composites ; Metallic Materials ; Microstructure ; Nanoscale Science and Technology ; Optical microscopes ; Physical Chemistry ; Powder metallurgy</subject><ispartof>Rare metals, 2019-12, Vol.38 (12), p.1169-1177</ispartof><rights>The Nonferrous Metals Society of China and Springer-Verlag GmbH Germany, part of Springer Nature 2019</rights><rights>Rare Metals is a copyright of Springer, (2019). All Rights Reserved.</rights><rights>Copyright Springer Nature B.V. 2019</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c347t-b9beb61c523fcc914c024438670d231ec8f814f9eeefc72e04c380252e8f99d63</citedby><cites>FETCH-LOGICAL-c347t-b9beb61c523fcc914c024438670d231ec8f814f9eeefc72e04c380252e8f99d63</cites><orcidid>0000-0001-5808-6263</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://link.springer.com/content/pdf/10.1007/s12598-019-01287-2$$EPDF$$P50$$Gspringer$$H</linktopdf><linktohtml>$$Uhttps://link.springer.com/10.1007/s12598-019-01287-2$$EHTML$$P50$$Gspringer$$H</linktohtml><link.rule.ids>314,780,784,27924,27925,41488,42557,51319</link.rule.ids></links><search><creatorcontrib>Balalan, Zulkuf</creatorcontrib><creatorcontrib>Gulan, Furkan</creatorcontrib><title>Microstructure and mechanical properties of Cu-B4C and CuAl-B4C composites produced by hot pressing</title><title>Rare metals</title><addtitle>Rare Met</addtitle><description>Cu matrix composite materials reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) and also CuAl matrix composites with 13 wt% Al reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) were fabricated by hot pressing (HP) and a powder metallurgy (PM) process. Experimental samples were produced by keeping them at 880 °C at the constant pressure of 2.3 × 10
8
Pa for 6 min. The density, microstructure and mechanical properties of the produced samples were examined. The microstructure and phase examinations were carried out by scanning electron microscope (SEM) and optical microscope (OM), energy-dispersive spectrometer (EDS) and X-ray diffractometer (XRD) analysis. The hardness measurements, three-point bending test and impact test were conducted to determine the mechanical properties. As a result of the examinations, it was observed that the relative density values decreased with the increasing content of B
4
C and provided a relatively effective bonding. Moreover, it was homogeneously distributed in the produced specimens. Consequently, there was a considerable increase in the hardness and the bending strength of CuAl matrix specimens with Al addition.</description><subject>Aluminum matrix composites</subject><subject>Bend strength</subject><subject>Biomaterials</subject><subject>Boron carbide</subject><subject>Chemistry and Materials Science</subject><subject>Composite materials</subject><subject>Densification</subject><subject>Density</subject><subject>Energy</subject><subject>Hardness</subject><subject>Hot pressing</subject><subject>Impact tests</subject><subject>Materials Engineering</subject><subject>Materials Science</subject><subject>Mechanical properties</subject><subject>Metal matrix composites</subject><subject>Metallic Materials</subject><subject>Microstructure</subject><subject>Nanoscale Science and Technology</subject><subject>Optical microscopes</subject><subject>Physical Chemistry</subject><subject>Powder metallurgy</subject><issn>1001-0521</issn><issn>1867-7185</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2019</creationdate><recordtype>article</recordtype><recordid>eNp9kD1PwzAQhi0EEqXwB5giMRvOjpPYY4n4kopYYLaSy7lN1SbBTgb-PW6LxNbBsk963rvzw9itgHsBUDwEITOjOQgTj9QFl2dsJnRe8ELo7Dy-AQSHTIpLdhXCBkCpPIcZw_cWfR9GP-E4eUqqrkl2hOuqa7HaJoPvB_JjSyHpXVJO_FGVB6acFttDgf1u6EM7RiLCzYTUJPVPsu7HWFMIbbe6Zheu2ga6-bvn7Ov56bN85cuPl7dyseSYqmLktampzgVmMnWIRigEqVQaPwGNTAWhdlooZ4jIYSEJFKYaZCZJO2OaPJ2zu2PfuMj3RGG0m37yXRxpY15rIcGcpmReSC1BQaTkkdrbCZ6cHXy7q_yPFWD3yu1RuY3K7UF5nDFn6TEUItytyP-3PpH6BTrbgto</recordid><startdate>20191201</startdate><enddate>20191201</enddate><creator>Balalan, Zulkuf</creator><creator>Gulan, Furkan</creator><general>Nonferrous Metals Society of China</general><general>Springer Nature B.V</general><scope>AAYXX</scope><scope>CITATION</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope><orcidid>https://orcid.org/0000-0001-5808-6263</orcidid></search><sort><creationdate>20191201</creationdate><title>Microstructure and mechanical properties of Cu-B4C and CuAl-B4C composites produced by hot pressing</title><author>Balalan, Zulkuf ; Gulan, Furkan</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c347t-b9beb61c523fcc914c024438670d231ec8f814f9eeefc72e04c380252e8f99d63</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2019</creationdate><topic>Aluminum matrix composites</topic><topic>Bend strength</topic><topic>Biomaterials</topic><topic>Boron carbide</topic><topic>Chemistry and Materials Science</topic><topic>Composite materials</topic><topic>Densification</topic><topic>Density</topic><topic>Energy</topic><topic>Hardness</topic><topic>Hot pressing</topic><topic>Impact tests</topic><topic>Materials Engineering</topic><topic>Materials Science</topic><topic>Mechanical properties</topic><topic>Metal matrix composites</topic><topic>Metallic Materials</topic><topic>Microstructure</topic><topic>Nanoscale Science and Technology</topic><topic>Optical microscopes</topic><topic>Physical Chemistry</topic><topic>Powder metallurgy</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Balalan, Zulkuf</creatorcontrib><creatorcontrib>Gulan, Furkan</creatorcontrib><collection>CrossRef</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Rare metals</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Balalan, Zulkuf</au><au>Gulan, Furkan</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Microstructure and mechanical properties of Cu-B4C and CuAl-B4C composites produced by hot pressing</atitle><jtitle>Rare metals</jtitle><stitle>Rare Met</stitle><date>2019-12-01</date><risdate>2019</risdate><volume>38</volume><issue>12</issue><spage>1169</spage><epage>1177</epage><pages>1169-1177</pages><issn>1001-0521</issn><eissn>1867-7185</eissn><abstract>Cu matrix composite materials reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) and also CuAl matrix composites with 13 wt% Al reinforced with B
4
C particle at four different contents (1.5 wt%, 3.0 wt%, 4.5 wt% and 6.0 wt%) were fabricated by hot pressing (HP) and a powder metallurgy (PM) process. Experimental samples were produced by keeping them at 880 °C at the constant pressure of 2.3 × 10
8
Pa for 6 min. The density, microstructure and mechanical properties of the produced samples were examined. The microstructure and phase examinations were carried out by scanning electron microscope (SEM) and optical microscope (OM), energy-dispersive spectrometer (EDS) and X-ray diffractometer (XRD) analysis. The hardness measurements, three-point bending test and impact test were conducted to determine the mechanical properties. As a result of the examinations, it was observed that the relative density values decreased with the increasing content of B
4
C and provided a relatively effective bonding. Moreover, it was homogeneously distributed in the produced specimens. Consequently, there was a considerable increase in the hardness and the bending strength of CuAl matrix specimens with Al addition.</abstract><cop>Beijing</cop><pub>Nonferrous Metals Society of China</pub><doi>10.1007/s12598-019-01287-2</doi><tpages>9</tpages><orcidid>https://orcid.org/0000-0001-5808-6263</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1001-0521 |
| ispartof | Rare metals, 2019-12, Vol.38 (12), p.1169-1177 |
| issn | 1001-0521 1867-7185 |
| language | eng |
| recordid | cdi_proquest_journals_2318812096 |
| source | Alma/SFX Local Collection; SpringerLink Journals - AutoHoldings |
| subjects | Aluminum matrix composites Bend strength Biomaterials Boron carbide Chemistry and Materials Science Composite materials Densification Density Energy Hardness Hot pressing Impact tests Materials Engineering Materials Science Mechanical properties Metal matrix composites Metallic Materials Microstructure Nanoscale Science and Technology Optical microscopes Physical Chemistry Powder metallurgy |
| title | Microstructure and mechanical properties of Cu-B4C and CuAl-B4C composites produced by hot pressing |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-07T01%3A08%3A30IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Microstructure%20and%20mechanical%20properties%20of%20Cu-B4C%20and%20CuAl-B4C%20composites%20produced%20by%20hot%20pressing&rft.jtitle=Rare%20metals&rft.au=Balalan,%20Zulkuf&rft.date=2019-12-01&rft.volume=38&rft.issue=12&rft.spage=1169&rft.epage=1177&rft.pages=1169-1177&rft.issn=1001-0521&rft.eissn=1867-7185&rft_id=info:doi/10.1007/s12598-019-01287-2&rft_dat=%3Cproquest_cross%3E2267282040%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2267282040&rft_id=info:pmid/&rfr_iscdi=true |