Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with Cul as a hole collector
Solid-state dye-sensitized solar cells (DSSCs) were fabricated in which the thin p-Cul film acts as a hole collector. Influences of the different preparation methods, composition, aging time of the ... pastes and sensitizing time on the performance of the cells were investigated. Different preparati...
Gespeichert in:
| Veröffentlicht in: | Solar energy 2007-06, Vol.81 (6), p.717 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | 6 |
| container_start_page | 717 |
| container_title | Solar energy |
| container_volume | 81 |
| creator | Yang, Li Zhang, Zhengxi Fang, Shaohua Gao, Xuhui Obata, Masamichi |
| description | Solid-state dye-sensitized solar cells (DSSCs) were fabricated in which the thin p-Cul film acts as a hole collector. Influences of the different preparation methods, composition, aging time of the ... pastes and sensitizing time on the performance of the cells were investigated. Different preparation routes for the ... paste do not obviously affect the performance of the cells. The volume of water, acetic acid and 2-propanol contained in the ... pastes and the amount of the ... powder were determined. The efficiency of the cells remains nearly stable when the aging period of the ... pastes is within one week. The favorable dying time is above 2 h. The cells having a favorable performance deliver a mean short-circuit photocurrent of ...10.8 mA ... and mean open-circuit voltage of 0.61 Vat 100 mW ... (1.5 AM). The mean fill factor and the mean efficiency of these cells are ...0.55% and 3.7%, respectively. The short-circuit photocurrent rapidly decays after 3 h, and at the same time, the open-circuit voltage slowly decreases when the time increases, and then remains nearly stable after 24 h. (ProQuest-CSA LLC: ... denotes formulae/symbols omitted.) |
| format | Article |
| fullrecord | <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_journals_231741945</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>1273132101</sourcerecordid><originalsourceid>FETCH-proquest_journals_2317419453</originalsourceid><addsrcrecordid>eNqNjU1qwzAQRkVoIe7PHYbuBZLtoGQdUtpVN1l0F4Q1xgpTjauRCe05euDaNAfoaj7mzfdmpSrbOqttvXE3qjKm2Wqzq9_X6k7kbIx1dusq9fOaepowdQjcQxkQxoyjz75ETtBxCnFJstBjfKsBCbuSOeC8Sn8FzD3nD391CFMMWoovCOELtWCS2fGNYUE-Q4dEApdYBthPBF7Aw8CE8zda5Jwf1G3vSfDxOu_V0_PhuH_RY-bPCaWczjzlNKNT3VjX2l27af519AslvVkj</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>231741945</pqid></control><display><type>article</type><title>Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with Cul as a hole collector</title><source>Access via ScienceDirect (Elsevier)</source><creator>Yang, Li ; Zhang, Zhengxi ; Fang, Shaohua ; Gao, Xuhui ; Obata, Masamichi</creator><creatorcontrib>Yang, Li ; Zhang, Zhengxi ; Fang, Shaohua ; Gao, Xuhui ; Obata, Masamichi</creatorcontrib><description>Solid-state dye-sensitized solar cells (DSSCs) were fabricated in which the thin p-Cul film acts as a hole collector. Influences of the different preparation methods, composition, aging time of the ... pastes and sensitizing time on the performance of the cells were investigated. Different preparation routes for the ... paste do not obviously affect the performance of the cells. The volume of water, acetic acid and 2-propanol contained in the ... pastes and the amount of the ... powder were determined. The efficiency of the cells remains nearly stable when the aging period of the ... pastes is within one week. The favorable dying time is above 2 h. The cells having a favorable performance deliver a mean short-circuit photocurrent of ...10.8 mA ... and mean open-circuit voltage of 0.61 Vat 100 mW ... (1.5 AM). The mean fill factor and the mean efficiency of these cells are ...0.55% and 3.7%, respectively. The short-circuit photocurrent rapidly decays after 3 h, and at the same time, the open-circuit voltage slowly decreases when the time increases, and then remains nearly stable after 24 h. (ProQuest-CSA LLC: ... denotes formulae/symbols omitted.)</description><identifier>ISSN: 0038-092X</identifier><identifier>EISSN: 1471-1257</identifier><identifier>CODEN: SRENA4</identifier><language>eng</language><publisher>New York: Pergamon Press Inc</publisher><subject>Electrodes ; Photovoltaic cells ; Solar energy ; Titanium oxide powders</subject><ispartof>Solar energy, 2007-06, Vol.81 (6), p.717</ispartof><rights>Copyright Pergamon Press Inc. Jun 2007</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784</link.rule.ids></links><search><creatorcontrib>Yang, Li</creatorcontrib><creatorcontrib>Zhang, Zhengxi</creatorcontrib><creatorcontrib>Fang, Shaohua</creatorcontrib><creatorcontrib>Gao, Xuhui</creatorcontrib><creatorcontrib>Obata, Masamichi</creatorcontrib><title>Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with Cul as a hole collector</title><title>Solar energy</title><description>Solid-state dye-sensitized solar cells (DSSCs) were fabricated in which the thin p-Cul film acts as a hole collector. Influences of the different preparation methods, composition, aging time of the ... pastes and sensitizing time on the performance of the cells were investigated. Different preparation routes for the ... paste do not obviously affect the performance of the cells. The volume of water, acetic acid and 2-propanol contained in the ... pastes and the amount of the ... powder were determined. The efficiency of the cells remains nearly stable when the aging period of the ... pastes is within one week. The favorable dying time is above 2 h. The cells having a favorable performance deliver a mean short-circuit photocurrent of ...10.8 mA ... and mean open-circuit voltage of 0.61 Vat 100 mW ... (1.5 AM). The mean fill factor and the mean efficiency of these cells are ...0.55% and 3.7%, respectively. The short-circuit photocurrent rapidly decays after 3 h, and at the same time, the open-circuit voltage slowly decreases when the time increases, and then remains nearly stable after 24 h. (ProQuest-CSA LLC: ... denotes formulae/symbols omitted.)</description><subject>Electrodes</subject><subject>Photovoltaic cells</subject><subject>Solar energy</subject><subject>Titanium oxide powders</subject><issn>0038-092X</issn><issn>1471-1257</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2007</creationdate><recordtype>article</recordtype><recordid>eNqNjU1qwzAQRkVoIe7PHYbuBZLtoGQdUtpVN1l0F4Q1xgpTjauRCe05euDaNAfoaj7mzfdmpSrbOqttvXE3qjKm2Wqzq9_X6k7kbIx1dusq9fOaepowdQjcQxkQxoyjz75ETtBxCnFJstBjfKsBCbuSOeC8Sn8FzD3nD391CFMMWoovCOELtWCS2fGNYUE-Q4dEApdYBthPBF7Aw8CE8zda5Jwf1G3vSfDxOu_V0_PhuH_RY-bPCaWczjzlNKNT3VjX2l27af519AslvVkj</recordid><startdate>20070601</startdate><enddate>20070601</enddate><creator>Yang, Li</creator><creator>Zhang, Zhengxi</creator><creator>Fang, Shaohua</creator><creator>Gao, Xuhui</creator><creator>Obata, Masamichi</creator><general>Pergamon Press Inc</general><scope>7SP</scope><scope>7ST</scope><scope>8FD</scope><scope>C1K</scope><scope>FR3</scope><scope>KR7</scope><scope>L7M</scope><scope>SOI</scope></search><sort><creationdate>20070601</creationdate><title>Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with Cul as a hole collector</title><author>Yang, Li ; Zhang, Zhengxi ; Fang, Shaohua ; Gao, Xuhui ; Obata, Masamichi</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_journals_2317419453</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2007</creationdate><topic>Electrodes</topic><topic>Photovoltaic cells</topic><topic>Solar energy</topic><topic>Titanium oxide powders</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Yang, Li</creatorcontrib><creatorcontrib>Zhang, Zhengxi</creatorcontrib><creatorcontrib>Fang, Shaohua</creatorcontrib><creatorcontrib>Gao, Xuhui</creatorcontrib><creatorcontrib>Obata, Masamichi</creatorcontrib><collection>Electronics & Communications Abstracts</collection><collection>Environment Abstracts</collection><collection>Technology Research Database</collection><collection>Environmental Sciences and Pollution Management</collection><collection>Engineering Research Database</collection><collection>Civil Engineering Abstracts</collection><collection>Advanced Technologies Database with Aerospace</collection><collection>Environment Abstracts</collection><jtitle>Solar energy</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Yang, Li</au><au>Zhang, Zhengxi</au><au>Fang, Shaohua</au><au>Gao, Xuhui</au><au>Obata, Masamichi</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with Cul as a hole collector</atitle><jtitle>Solar energy</jtitle><date>2007-06-01</date><risdate>2007</risdate><volume>81</volume><issue>6</issue><spage>717</spage><pages>717-</pages><issn>0038-092X</issn><eissn>1471-1257</eissn><coden>SRENA4</coden><abstract>Solid-state dye-sensitized solar cells (DSSCs) were fabricated in which the thin p-Cul film acts as a hole collector. Influences of the different preparation methods, composition, aging time of the ... pastes and sensitizing time on the performance of the cells were investigated. Different preparation routes for the ... paste do not obviously affect the performance of the cells. The volume of water, acetic acid and 2-propanol contained in the ... pastes and the amount of the ... powder were determined. The efficiency of the cells remains nearly stable when the aging period of the ... pastes is within one week. The favorable dying time is above 2 h. The cells having a favorable performance deliver a mean short-circuit photocurrent of ...10.8 mA ... and mean open-circuit voltage of 0.61 Vat 100 mW ... (1.5 AM). The mean fill factor and the mean efficiency of these cells are ...0.55% and 3.7%, respectively. The short-circuit photocurrent rapidly decays after 3 h, and at the same time, the open-circuit voltage slowly decreases when the time increases, and then remains nearly stable after 24 h. (ProQuest-CSA LLC: ... denotes formulae/symbols omitted.)</abstract><cop>New York</cop><pub>Pergamon Press Inc</pub></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0038-092X |
| ispartof | Solar energy, 2007-06, Vol.81 (6), p.717 |
| issn | 0038-092X 1471-1257 |
| language | eng |
| recordid | cdi_proquest_journals_231741945 |
| source | Access via ScienceDirect (Elsevier) |
| subjects | Electrodes Photovoltaic cells Solar energy Titanium oxide powders |
| title | Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with Cul as a hole collector |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-23T13%3A18%3A08IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Influence%20of%20the%20preparation%20conditions%20of%20TiO2%20electrodes%20on%20the%20performance%20of%20solid-state%20dye-sensitized%20solar%20cells%20with%20Cul%20as%20a%20hole%20collector&rft.jtitle=Solar%20energy&rft.au=Yang,%20Li&rft.date=2007-06-01&rft.volume=81&rft.issue=6&rft.spage=717&rft.pages=717-&rft.issn=0038-092X&rft.eissn=1471-1257&rft.coden=SRENA4&rft_id=info:doi/&rft_dat=%3Cproquest%3E1273132101%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=231741945&rft_id=info:pmid/&rfr_iscdi=true |