Effect of Sintering Parameters on Mechanical Properties of 17-Cr Ferritic ODS Steel Through Taguchi Approach

Ferritic oxide dispersion-strengthened (ODS) steels containing Fe–17Cr–0.89Mn–0.89Si–0.25Y 2 O 3 –1.5ZrO 2 –3Al (wt%) was prepared through mechanical alloying, and X-ray diffractogram was used to analyze crystallite size for different time intervals during milling. Milled powders were consolidated a...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Journal of the Institution of Engineers (India): Series D 2019-10, Vol.100 (2), p.163-176
Hauptverfasser:	Dharmalingam, G., Mariappan, R., Murali, Arun Prasad
Format:	Artikel
Sprache:	eng
Schlagworte:	Cooling Cooling rate Crystallites Densification Density Design of experiments Dispersion hardening alloys Dispersion hardening steels Engineering Ferritic stainless steels Hardness Hot pressing Mechanical alloying Mechanical properties Metallurgical analysis Optimization Original Contribution Orthogonal arrays Oxide dispersion strengthening Powder metallurgy Powder metallurgy parts Process parameters Signal processing Signal to noise ratio Sintering Sintering (powder metallurgy) Taguchi methods Tensile strength Variance analysis
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Schreiben Sie den ersten Kommentar!