Relationship between the carbon nanotube dispersion state, electrochemical impedance and capacitance and mechanical properties of percolative nanoreinforced OPC mortars
The homogeneous dispersion of carbon nanotubes, (CNTs), in a cementitious matrix is a crucial procedure that affects both mechanical properties and electrical conductivity of the nanocomposite. Electrochemical Impedance Spectroscopy, (EIS), can be very useful in studying and characterizing the impac...
Gespeichert in:
Veröffentlicht in: | Carbon (New York) 2019-04, Vol.145, p.218-228 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 228 |
---|---|
container_issue | |
container_start_page | 218 |
container_title | Carbon (New York) |
container_volume | 145 |
creator | Danoglidis, Panagiotis A. Konsta-Gdoutos, Maria S. Shah, Surendra P. |
description | The homogeneous dispersion of carbon nanotubes, (CNTs), in a cementitious matrix is a crucial procedure that affects both mechanical properties and electrical conductivity of the nanocomposite. Electrochemical Impedance Spectroscopy, (EIS), can be very useful in studying and characterizing the impact of the CNT content in nanoreinforced cementitious materials in a quantitative way. In this study, measurements of the resistance, reactance and capacitance reveal the nature of circuit elements formed by the nanotube network in cement mortars reinforced with various amounts of carbon nanotubes and provide insight of the nanotubes’ dispersion state. Resistivity results show that percolation threshold was reached between CNT weight fractions of 0.1% and 0.15 wt%. Below percolation, a consistency between resistive and capacitive phases exists, i.e., resistivity, reactance and capacitance were found to decrease as the nanotube content increases. After the continuous conductive network was formed, and percolative behavior was achieved, resistivity values show a little dependence on the CNT content. However, the presence of CNT entanglements was found to contribute to an amplified energy storage ability, as both the imaginary part of impedance (reactance) and capacitance were increased. A correlation between capacitance, flexural strength and modulus of elasticity was observed for the first time. Capacitance values provide valuable information on the energy storage ability of the material and how the actual CNT dispersion state affects the mechanical properties of percolative nanoreinforced cementitious materials. Finally, a general micromechanics model, modified by taking into account the conductive mechanisms below and above percolation threshold, was successfully implemented. The theoretically determined values of the overall electrical conductivity are in good agreement with the experimental results.
[Display omitted] |
doi_str_mv | 10.1016/j.carbon.2018.12.088 |
format | Article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2235025848</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0008622318312223</els_id><sourcerecordid>2235025848</sourcerecordid><originalsourceid>FETCH-LOGICAL-c334t-a2a0b5c3d113349a6c3fc6307c67ef05992db3b216f40fbbc8e8d6ab603dcf593</originalsourceid><addsrcrecordid>eNp9UcuqFDEUDKLgePUPXATc2m0e3T3pjSCDL7hwRXQdkpMTJsN00iaZK_6Rn2nmtrh0lRRU1TmnipCXnPWc8enNqQeTbYq9YFz1XPRMqUdkx9VedlLN_DHZMcZUNwkhn5JnpZwaHBQfduT3VzybGlIsx7BSi_UnYqT1iHSzpNHEVC8WqQtlxVwalZZqKr6meEaoOcERlwDmTMOyojMRkJromn41EOo_vCAcTXwgrjk1qxqw0ORp-0K6LnGPD9MyhuhTBnT07suBLilXk8tz8sSbc8EXf98b8v3D-2-HT93t3cfPh3e3HUg51M4Iw-wI0nHe8GwmkB4myfYw7dGzcZ6Fs9IKPvmBeWtBoXKTsROTDvw4yxvyavNtS_64YKn6lC45tpG6pTcyMapBNdawsSCnUjJ6veawmPxLc6avneiT3gLU1040F7p10mRvNxm2C-4DZl0gYEvIhdyy1C6F_xv8AbxmnEw</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2235025848</pqid></control><display><type>article</type><title>Relationship between the carbon nanotube dispersion state, electrochemical impedance and capacitance and mechanical properties of percolative nanoreinforced OPC mortars</title><source>ScienceDirect Journals (5 years ago - present)</source><creator>Danoglidis, Panagiotis A. ; Konsta-Gdoutos, Maria S. ; Shah, Surendra P.</creator><creatorcontrib>Danoglidis, Panagiotis A. ; Konsta-Gdoutos, Maria S. ; Shah, Surendra P.</creatorcontrib><description>The homogeneous dispersion of carbon nanotubes, (CNTs), in a cementitious matrix is a crucial procedure that affects both mechanical properties and electrical conductivity of the nanocomposite. Electrochemical Impedance Spectroscopy, (EIS), can be very useful in studying and characterizing the impact of the CNT content in nanoreinforced cementitious materials in a quantitative way. In this study, measurements of the resistance, reactance and capacitance reveal the nature of circuit elements formed by the nanotube network in cement mortars reinforced with various amounts of carbon nanotubes and provide insight of the nanotubes’ dispersion state. Resistivity results show that percolation threshold was reached between CNT weight fractions of 0.1% and 0.15 wt%. Below percolation, a consistency between resistive and capacitive phases exists, i.e., resistivity, reactance and capacitance were found to decrease as the nanotube content increases. After the continuous conductive network was formed, and percolative behavior was achieved, resistivity values show a little dependence on the CNT content. However, the presence of CNT entanglements was found to contribute to an amplified energy storage ability, as both the imaginary part of impedance (reactance) and capacitance were increased. A correlation between capacitance, flexural strength and modulus of elasticity was observed for the first time. Capacitance values provide valuable information on the energy storage ability of the material and how the actual CNT dispersion state affects the mechanical properties of percolative nanoreinforced cementitious materials. Finally, a general micromechanics model, modified by taking into account the conductive mechanisms below and above percolation threshold, was successfully implemented. The theoretically determined values of the overall electrical conductivity are in good agreement with the experimental results.
[Display omitted]</description><identifier>ISSN: 0008-6223</identifier><identifier>EISSN: 1873-3891</identifier><identifier>DOI: 10.1016/j.carbon.2018.12.088</identifier><language>eng</language><publisher>New York: Elsevier Ltd</publisher><subject>Capacitance ; Carbon ; Carbon nanotubes ; Cement reinforcements ; Composite materials ; Dependence ; Dispersion ; Electrical resistivity ; Electrochemical impedance spectroscopy ; Energy storage ; Mechanical properties ; Micromechanics ; Modulus of elasticity ; Mortars (material) ; Nanocomposites ; Nanotubes ; Percolation ; Reactance</subject><ispartof>Carbon (New York), 2019-04, Vol.145, p.218-228</ispartof><rights>2019 Elsevier Ltd</rights><rights>Copyright Elsevier BV Apr 2019</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c334t-a2a0b5c3d113349a6c3fc6307c67ef05992db3b216f40fbbc8e8d6ab603dcf593</citedby><cites>FETCH-LOGICAL-c334t-a2a0b5c3d113349a6c3fc6307c67ef05992db3b216f40fbbc8e8d6ab603dcf593</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S0008622318312223$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3537,27901,27902,65306</link.rule.ids></links><search><creatorcontrib>Danoglidis, Panagiotis A.</creatorcontrib><creatorcontrib>Konsta-Gdoutos, Maria S.</creatorcontrib><creatorcontrib>Shah, Surendra P.</creatorcontrib><title>Relationship between the carbon nanotube dispersion state, electrochemical impedance and capacitance and mechanical properties of percolative nanoreinforced OPC mortars</title><title>Carbon (New York)</title><description>The homogeneous dispersion of carbon nanotubes, (CNTs), in a cementitious matrix is a crucial procedure that affects both mechanical properties and electrical conductivity of the nanocomposite. Electrochemical Impedance Spectroscopy, (EIS), can be very useful in studying and characterizing the impact of the CNT content in nanoreinforced cementitious materials in a quantitative way. In this study, measurements of the resistance, reactance and capacitance reveal the nature of circuit elements formed by the nanotube network in cement mortars reinforced with various amounts of carbon nanotubes and provide insight of the nanotubes’ dispersion state. Resistivity results show that percolation threshold was reached between CNT weight fractions of 0.1% and 0.15 wt%. Below percolation, a consistency between resistive and capacitive phases exists, i.e., resistivity, reactance and capacitance were found to decrease as the nanotube content increases. After the continuous conductive network was formed, and percolative behavior was achieved, resistivity values show a little dependence on the CNT content. However, the presence of CNT entanglements was found to contribute to an amplified energy storage ability, as both the imaginary part of impedance (reactance) and capacitance were increased. A correlation between capacitance, flexural strength and modulus of elasticity was observed for the first time. Capacitance values provide valuable information on the energy storage ability of the material and how the actual CNT dispersion state affects the mechanical properties of percolative nanoreinforced cementitious materials. Finally, a general micromechanics model, modified by taking into account the conductive mechanisms below and above percolation threshold, was successfully implemented. The theoretically determined values of the overall electrical conductivity are in good agreement with the experimental results.
[Display omitted]</description><subject>Capacitance</subject><subject>Carbon</subject><subject>Carbon nanotubes</subject><subject>Cement reinforcements</subject><subject>Composite materials</subject><subject>Dependence</subject><subject>Dispersion</subject><subject>Electrical resistivity</subject><subject>Electrochemical impedance spectroscopy</subject><subject>Energy storage</subject><subject>Mechanical properties</subject><subject>Micromechanics</subject><subject>Modulus of elasticity</subject><subject>Mortars (material)</subject><subject>Nanocomposites</subject><subject>Nanotubes</subject><subject>Percolation</subject><subject>Reactance</subject><issn>0008-6223</issn><issn>1873-3891</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2019</creationdate><recordtype>article</recordtype><recordid>eNp9UcuqFDEUDKLgePUPXATc2m0e3T3pjSCDL7hwRXQdkpMTJsN00iaZK_6Rn2nmtrh0lRRU1TmnipCXnPWc8enNqQeTbYq9YFz1XPRMqUdkx9VedlLN_DHZMcZUNwkhn5JnpZwaHBQfduT3VzybGlIsx7BSi_UnYqT1iHSzpNHEVC8WqQtlxVwalZZqKr6meEaoOcERlwDmTMOyojMRkJromn41EOo_vCAcTXwgrjk1qxqw0ORp-0K6LnGPD9MyhuhTBnT07suBLilXk8tz8sSbc8EXf98b8v3D-2-HT93t3cfPh3e3HUg51M4Iw-wI0nHe8GwmkB4myfYw7dGzcZ6Fs9IKPvmBeWtBoXKTsROTDvw4yxvyavNtS_64YKn6lC45tpG6pTcyMapBNdawsSCnUjJ6veawmPxLc6avneiT3gLU1040F7p10mRvNxm2C-4DZl0gYEvIhdyy1C6F_xv8AbxmnEw</recordid><startdate>201904</startdate><enddate>201904</enddate><creator>Danoglidis, Panagiotis A.</creator><creator>Konsta-Gdoutos, Maria S.</creator><creator>Shah, Surendra P.</creator><general>Elsevier Ltd</general><general>Elsevier BV</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>201904</creationdate><title>Relationship between the carbon nanotube dispersion state, electrochemical impedance and capacitance and mechanical properties of percolative nanoreinforced OPC mortars</title><author>Danoglidis, Panagiotis A. ; Konsta-Gdoutos, Maria S. ; Shah, Surendra P.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c334t-a2a0b5c3d113349a6c3fc6307c67ef05992db3b216f40fbbc8e8d6ab603dcf593</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2019</creationdate><topic>Capacitance</topic><topic>Carbon</topic><topic>Carbon nanotubes</topic><topic>Cement reinforcements</topic><topic>Composite materials</topic><topic>Dependence</topic><topic>Dispersion</topic><topic>Electrical resistivity</topic><topic>Electrochemical impedance spectroscopy</topic><topic>Energy storage</topic><topic>Mechanical properties</topic><topic>Micromechanics</topic><topic>Modulus of elasticity</topic><topic>Mortars (material)</topic><topic>Nanocomposites</topic><topic>Nanotubes</topic><topic>Percolation</topic><topic>Reactance</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Danoglidis, Panagiotis A.</creatorcontrib><creatorcontrib>Konsta-Gdoutos, Maria S.</creatorcontrib><creatorcontrib>Shah, Surendra P.</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Carbon (New York)</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Danoglidis, Panagiotis A.</au><au>Konsta-Gdoutos, Maria S.</au><au>Shah, Surendra P.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Relationship between the carbon nanotube dispersion state, electrochemical impedance and capacitance and mechanical properties of percolative nanoreinforced OPC mortars</atitle><jtitle>Carbon (New York)</jtitle><date>2019-04</date><risdate>2019</risdate><volume>145</volume><spage>218</spage><epage>228</epage><pages>218-228</pages><issn>0008-6223</issn><eissn>1873-3891</eissn><abstract>The homogeneous dispersion of carbon nanotubes, (CNTs), in a cementitious matrix is a crucial procedure that affects both mechanical properties and electrical conductivity of the nanocomposite. Electrochemical Impedance Spectroscopy, (EIS), can be very useful in studying and characterizing the impact of the CNT content in nanoreinforced cementitious materials in a quantitative way. In this study, measurements of the resistance, reactance and capacitance reveal the nature of circuit elements formed by the nanotube network in cement mortars reinforced with various amounts of carbon nanotubes and provide insight of the nanotubes’ dispersion state. Resistivity results show that percolation threshold was reached between CNT weight fractions of 0.1% and 0.15 wt%. Below percolation, a consistency between resistive and capacitive phases exists, i.e., resistivity, reactance and capacitance were found to decrease as the nanotube content increases. After the continuous conductive network was formed, and percolative behavior was achieved, resistivity values show a little dependence on the CNT content. However, the presence of CNT entanglements was found to contribute to an amplified energy storage ability, as both the imaginary part of impedance (reactance) and capacitance were increased. A correlation between capacitance, flexural strength and modulus of elasticity was observed for the first time. Capacitance values provide valuable information on the energy storage ability of the material and how the actual CNT dispersion state affects the mechanical properties of percolative nanoreinforced cementitious materials. Finally, a general micromechanics model, modified by taking into account the conductive mechanisms below and above percolation threshold, was successfully implemented. The theoretically determined values of the overall electrical conductivity are in good agreement with the experimental results.
[Display omitted]</abstract><cop>New York</cop><pub>Elsevier Ltd</pub><doi>10.1016/j.carbon.2018.12.088</doi><tpages>11</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0008-6223 |
ispartof | Carbon (New York), 2019-04, Vol.145, p.218-228 |
issn | 0008-6223 1873-3891 |
language | eng |
recordid | cdi_proquest_journals_2235025848 |
source | ScienceDirect Journals (5 years ago - present) |
subjects | Capacitance Carbon Carbon nanotubes Cement reinforcements Composite materials Dependence Dispersion Electrical resistivity Electrochemical impedance spectroscopy Energy storage Mechanical properties Micromechanics Modulus of elasticity Mortars (material) Nanocomposites Nanotubes Percolation Reactance |
title | Relationship between the carbon nanotube dispersion state, electrochemical impedance and capacitance and mechanical properties of percolative nanoreinforced OPC mortars |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-30T18%3A08%3A25IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Relationship%20between%20the%20carbon%20nanotube%20dispersion%20state,%20electrochemical%20impedance%20and%20capacitance%20and%20mechanical%20properties%20of%20percolative%20nanoreinforced%20OPC%20mortars&rft.jtitle=Carbon%20(New%20York)&rft.au=Danoglidis,%20Panagiotis%20A.&rft.date=2019-04&rft.volume=145&rft.spage=218&rft.epage=228&rft.pages=218-228&rft.issn=0008-6223&rft.eissn=1873-3891&rft_id=info:doi/10.1016/j.carbon.2018.12.088&rft_dat=%3Cproquest_cross%3E2235025848%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2235025848&rft_id=info:pmid/&rft_els_id=S0008622318312223&rfr_iscdi=true |