Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding
AISI 316 austenitic stainless steel samples were treated via gaseous nitriding at low temperature (430 °C) to obtain a single expanded austenite layer (S-phase). The structural phases were characterized via both optical microscopy and X-ray diffraction. Microhardness and dry-sliding wear behavior we...
Gespeichert in:
| Veröffentlicht in: | Surface & coatings technology 2019-03, Vol.361, p.349-356 |
|---|---|
| Hauptverfasser: | , , , , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 356 |
|---|---|
| container_issue | |
| container_start_page | 349 |
| container_title | Surface & coatings technology |
| container_volume | 361 |
| creator | Wang, Xingwei Liu, Zhongyu Chen, Yangyang Sun, Jinquan He, Qingkun Liu, Qiancheng Liu, Guozhi Xie, Kun |
| description | AISI 316 austenitic stainless steel samples were treated via gaseous nitriding at low temperature (430 °C) to obtain a single expanded austenite layer (S-phase). The structural phases were characterized via both optical microscopy and X-ray diffraction. Microhardness and dry-sliding wear behavior were investigated via scanning electron microscopy, electron probe of microanalysis, Vickers indentation tester, and ball-on-flat wear tester, respectively. The wear of the substrate AISI 316 steel was severe and characterized by strong adhesion, abrasion, and spallation, while the wear of the S-phase layer was mild and dominated by slight abrasion. Furthermore, the corrosion properties were investigated via potentiodynamic polarization testing in 3.5% NaCl solution. The results show that the S-phase layers was produced at low nitrided temperature with improved wear resistance as well as improved corrosion resistance.
•Gaseous nitriding at 430 °C produced a S-phase layer with thickness of 7–9 μm.•The maximum surface microhardness of 1100 HV0.05 was obtained.•The corrosion resistance was improved by gaseous nitriding.•The wear resistance was enhanced significantly by gaseous nitriding. |
| doi_str_mv | 10.1016/j.surfcoat.2019.01.028 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2203100577</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0257897219300374</els_id><sourcerecordid>2203100577</sourcerecordid><originalsourceid>FETCH-LOGICAL-c340t-ffc068a6eda37cbb3687b37d66ef0dcf1bc306066ed7c664d18e7601de9f25803</originalsourceid><addsrcrecordid>eNqFkE9LAzEQxYMoWKtfQQKed51stsnuzVL8UxA8qOeQTSaSopuaZCt-e1OqZ0_DwHtv5v0IuWRQM2DielOnKToTdK4bYH0NrIamOyIz1sm-4ryVx2QGzUJWXS-bU3KW0gYAmOzbGbHLIerkd0gjJp-yHg1SPVpqQowh-TDSbQxbjNljosHR5fp5TTkTNHksrp3X9D18VRk_ikjnKSJ90wnDlOjoc_TWj2_n5MTp94QXv3NOXu9uX1YP1ePT_Xq1fKwMbyFXzhkQnRZoNZdmGLjo5MClFQIdWOPYYDgIKKuVRojWsg6lAGaxd82iAz4nV4fc8vLnhCmrTZjiWE6qpgHOABZSFpU4qEwpmCI6tY3-Q8dvxUDtiaqN-iOq9kQVMFWIFuPNwYilw85jVMl4LMCsj2iyssH_F_EDdJWEOg</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2203100577</pqid></control><display><type>article</type><title>Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding</title><source>Elsevier ScienceDirect Journals Complete</source><creator>Wang, Xingwei ; Liu, Zhongyu ; Chen, Yangyang ; Sun, Jinquan ; He, Qingkun ; Liu, Qiancheng ; Liu, Guozhi ; Xie, Kun</creator><creatorcontrib>Wang, Xingwei ; Liu, Zhongyu ; Chen, Yangyang ; Sun, Jinquan ; He, Qingkun ; Liu, Qiancheng ; Liu, Guozhi ; Xie, Kun</creatorcontrib><description>AISI 316 austenitic stainless steel samples were treated via gaseous nitriding at low temperature (430 °C) to obtain a single expanded austenite layer (S-phase). The structural phases were characterized via both optical microscopy and X-ray diffraction. Microhardness and dry-sliding wear behavior were investigated via scanning electron microscopy, electron probe of microanalysis, Vickers indentation tester, and ball-on-flat wear tester, respectively. The wear of the substrate AISI 316 steel was severe and characterized by strong adhesion, abrasion, and spallation, while the wear of the S-phase layer was mild and dominated by slight abrasion. Furthermore, the corrosion properties were investigated via potentiodynamic polarization testing in 3.5% NaCl solution. The results show that the S-phase layers was produced at low nitrided temperature with improved wear resistance as well as improved corrosion resistance.
•Gaseous nitriding at 430 °C produced a S-phase layer with thickness of 7–9 μm.•The maximum surface microhardness of 1100 HV0.05 was obtained.•The corrosion resistance was improved by gaseous nitriding.•The wear resistance was enhanced significantly by gaseous nitriding.</description><identifier>ISSN: 0257-8972</identifier><identifier>EISSN: 1879-3347</identifier><identifier>DOI: 10.1016/j.surfcoat.2019.01.028</identifier><language>eng</language><publisher>Lausanne: Elsevier B.V</publisher><subject>Abrasion ; Adhesive strength ; AISI 316 sieve ; Austenitic stainless steels ; Corrosion ; Corrosion resistance ; Corrosive wear ; Diamond pyramid hardness tests ; Electron probes ; Frictional wear ; Low temperature ; Low-temperature nitriding ; Microscopes ; Microscopy ; Nitriding ; Optical microscopy ; Scanning electron microscopy ; Sliding friction ; Spallation ; Substrates ; Wear resistance ; X-ray diffraction</subject><ispartof>Surface & coatings technology, 2019-03, Vol.361, p.349-356</ispartof><rights>2019 Elsevier B.V.</rights><rights>Copyright Elsevier BV Mar 15, 2019</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c340t-ffc068a6eda37cbb3687b37d66ef0dcf1bc306066ed7c664d18e7601de9f25803</citedby><cites>FETCH-LOGICAL-c340t-ffc068a6eda37cbb3687b37d66ef0dcf1bc306066ed7c664d18e7601de9f25803</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.surfcoat.2019.01.028$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids></links><search><creatorcontrib>Wang, Xingwei</creatorcontrib><creatorcontrib>Liu, Zhongyu</creatorcontrib><creatorcontrib>Chen, Yangyang</creatorcontrib><creatorcontrib>Sun, Jinquan</creatorcontrib><creatorcontrib>He, Qingkun</creatorcontrib><creatorcontrib>Liu, Qiancheng</creatorcontrib><creatorcontrib>Liu, Guozhi</creatorcontrib><creatorcontrib>Xie, Kun</creatorcontrib><title>Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding</title><title>Surface & coatings technology</title><description>AISI 316 austenitic stainless steel samples were treated via gaseous nitriding at low temperature (430 °C) to obtain a single expanded austenite layer (S-phase). The structural phases were characterized via both optical microscopy and X-ray diffraction. Microhardness and dry-sliding wear behavior were investigated via scanning electron microscopy, electron probe of microanalysis, Vickers indentation tester, and ball-on-flat wear tester, respectively. The wear of the substrate AISI 316 steel was severe and characterized by strong adhesion, abrasion, and spallation, while the wear of the S-phase layer was mild and dominated by slight abrasion. Furthermore, the corrosion properties were investigated via potentiodynamic polarization testing in 3.5% NaCl solution. The results show that the S-phase layers was produced at low nitrided temperature with improved wear resistance as well as improved corrosion resistance.
•Gaseous nitriding at 430 °C produced a S-phase layer with thickness of 7–9 μm.•The maximum surface microhardness of 1100 HV0.05 was obtained.•The corrosion resistance was improved by gaseous nitriding.•The wear resistance was enhanced significantly by gaseous nitriding.</description><subject>Abrasion</subject><subject>Adhesive strength</subject><subject>AISI 316 sieve</subject><subject>Austenitic stainless steels</subject><subject>Corrosion</subject><subject>Corrosion resistance</subject><subject>Corrosive wear</subject><subject>Diamond pyramid hardness tests</subject><subject>Electron probes</subject><subject>Frictional wear</subject><subject>Low temperature</subject><subject>Low-temperature nitriding</subject><subject>Microscopes</subject><subject>Microscopy</subject><subject>Nitriding</subject><subject>Optical microscopy</subject><subject>Scanning electron microscopy</subject><subject>Sliding friction</subject><subject>Spallation</subject><subject>Substrates</subject><subject>Wear resistance</subject><subject>X-ray diffraction</subject><issn>0257-8972</issn><issn>1879-3347</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2019</creationdate><recordtype>article</recordtype><recordid>eNqFkE9LAzEQxYMoWKtfQQKed51stsnuzVL8UxA8qOeQTSaSopuaZCt-e1OqZ0_DwHtv5v0IuWRQM2DielOnKToTdK4bYH0NrIamOyIz1sm-4ryVx2QGzUJWXS-bU3KW0gYAmOzbGbHLIerkd0gjJp-yHg1SPVpqQowh-TDSbQxbjNljosHR5fp5TTkTNHksrp3X9D18VRk_ikjnKSJ90wnDlOjoc_TWj2_n5MTp94QXv3NOXu9uX1YP1ePT_Xq1fKwMbyFXzhkQnRZoNZdmGLjo5MClFQIdWOPYYDgIKKuVRojWsg6lAGaxd82iAz4nV4fc8vLnhCmrTZjiWE6qpgHOABZSFpU4qEwpmCI6tY3-Q8dvxUDtiaqN-iOq9kQVMFWIFuPNwYilw85jVMl4LMCsj2iyssH_F_EDdJWEOg</recordid><startdate>20190315</startdate><enddate>20190315</enddate><creator>Wang, Xingwei</creator><creator>Liu, Zhongyu</creator><creator>Chen, Yangyang</creator><creator>Sun, Jinquan</creator><creator>He, Qingkun</creator><creator>Liu, Qiancheng</creator><creator>Liu, Guozhi</creator><creator>Xie, Kun</creator><general>Elsevier B.V</general><general>Elsevier BV</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7QQ</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20190315</creationdate><title>Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding</title><author>Wang, Xingwei ; Liu, Zhongyu ; Chen, Yangyang ; Sun, Jinquan ; He, Qingkun ; Liu, Qiancheng ; Liu, Guozhi ; Xie, Kun</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c340t-ffc068a6eda37cbb3687b37d66ef0dcf1bc306066ed7c664d18e7601de9f25803</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2019</creationdate><topic>Abrasion</topic><topic>Adhesive strength</topic><topic>AISI 316 sieve</topic><topic>Austenitic stainless steels</topic><topic>Corrosion</topic><topic>Corrosion resistance</topic><topic>Corrosive wear</topic><topic>Diamond pyramid hardness tests</topic><topic>Electron probes</topic><topic>Frictional wear</topic><topic>Low temperature</topic><topic>Low-temperature nitriding</topic><topic>Microscopes</topic><topic>Microscopy</topic><topic>Nitriding</topic><topic>Optical microscopy</topic><topic>Scanning electron microscopy</topic><topic>Sliding friction</topic><topic>Spallation</topic><topic>Substrates</topic><topic>Wear resistance</topic><topic>X-ray diffraction</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Wang, Xingwei</creatorcontrib><creatorcontrib>Liu, Zhongyu</creatorcontrib><creatorcontrib>Chen, Yangyang</creatorcontrib><creatorcontrib>Sun, Jinquan</creatorcontrib><creatorcontrib>He, Qingkun</creatorcontrib><creatorcontrib>Liu, Qiancheng</creatorcontrib><creatorcontrib>Liu, Guozhi</creatorcontrib><creatorcontrib>Xie, Kun</creatorcontrib><collection>CrossRef</collection><collection>Ceramic Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Surface & coatings technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Wang, Xingwei</au><au>Liu, Zhongyu</au><au>Chen, Yangyang</au><au>Sun, Jinquan</au><au>He, Qingkun</au><au>Liu, Qiancheng</au><au>Liu, Guozhi</au><au>Xie, Kun</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding</atitle><jtitle>Surface & coatings technology</jtitle><date>2019-03-15</date><risdate>2019</risdate><volume>361</volume><spage>349</spage><epage>356</epage><pages>349-356</pages><issn>0257-8972</issn><eissn>1879-3347</eissn><abstract>AISI 316 austenitic stainless steel samples were treated via gaseous nitriding at low temperature (430 °C) to obtain a single expanded austenite layer (S-phase). The structural phases were characterized via both optical microscopy and X-ray diffraction. Microhardness and dry-sliding wear behavior were investigated via scanning electron microscopy, electron probe of microanalysis, Vickers indentation tester, and ball-on-flat wear tester, respectively. The wear of the substrate AISI 316 steel was severe and characterized by strong adhesion, abrasion, and spallation, while the wear of the S-phase layer was mild and dominated by slight abrasion. Furthermore, the corrosion properties were investigated via potentiodynamic polarization testing in 3.5% NaCl solution. The results show that the S-phase layers was produced at low nitrided temperature with improved wear resistance as well as improved corrosion resistance.
•Gaseous nitriding at 430 °C produced a S-phase layer with thickness of 7–9 μm.•The maximum surface microhardness of 1100 HV0.05 was obtained.•The corrosion resistance was improved by gaseous nitriding.•The wear resistance was enhanced significantly by gaseous nitriding.</abstract><cop>Lausanne</cop><pub>Elsevier B.V</pub><doi>10.1016/j.surfcoat.2019.01.028</doi><tpages>8</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0257-8972 |
| ispartof | Surface & coatings technology, 2019-03, Vol.361, p.349-356 |
| issn | 0257-8972 1879-3347 |
| language | eng |
| recordid | cdi_proquest_journals_2203100577 |
| source | Elsevier ScienceDirect Journals Complete |
| subjects | Abrasion Adhesive strength AISI 316 sieve Austenitic stainless steels Corrosion Corrosion resistance Corrosive wear Diamond pyramid hardness tests Electron probes Frictional wear Low temperature Low-temperature nitriding Microscopes Microscopy Nitriding Optical microscopy Scanning electron microscopy Sliding friction Spallation Substrates Wear resistance X-ray diffraction |
| title | Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-24T13%3A03%3A48IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Abrasive%20resistance%20and%20corrosion%20properties%20of%20AISI%20316%20sieve%20via%20low-temperature%20gaseous%20nitriding&rft.jtitle=Surface%20&%20coatings%20technology&rft.au=Wang,%20Xingwei&rft.date=2019-03-15&rft.volume=361&rft.spage=349&rft.epage=356&rft.pages=349-356&rft.issn=0257-8972&rft.eissn=1879-3347&rft_id=info:doi/10.1016/j.surfcoat.2019.01.028&rft_dat=%3Cproquest_cross%3E2203100577%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2203100577&rft_id=info:pmid/&rft_els_id=S0257897219300374&rfr_iscdi=true |