Precision hole punching on composite fiber reinforced polymer panels
Structural materials, such as composite panels, can only be assembled, and in most cases through the use of fasteners, which are fitted into the drilled holes. However, drilling is costly and time consuming, thus affecting productivity. This research aims to develop an alternative method to drilling...
Gespeichert in:
| Hauptverfasser: | , , , |
|---|---|
| Format: | Tagungsbericht |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | 1 |
| container_start_page | |
| container_title | |
| container_volume | 1901 |
| creator | Abdullah, A. B. Zain, M. S. M. Chan, H. Y. Samad, Z. |
| description | Structural materials, such as composite panels, can only be assembled, and in most cases through the use of fasteners, which are fitted into the drilled holes. However, drilling is costly and time consuming, thus affecting productivity. This research aims to develop an alternative method to drilling. In this paper, the precision of the holes was measured and the effects of the die clearance to the areas around the holes were evaluated. Measurement and evaluation were performed based on the profile of the holes constructed using Alicona IFM, a 3D surface measurement technique. Results showed that punching is a potential alternative to drilling but still requires improvements. |
| doi_str_mv | 10.1063/1.5010491 |
| format | Conference Proceeding |
| fullrecord | <record><control><sourceid>proquest_scita</sourceid><recordid>TN_cdi_proquest_journals_2116009812</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2116009812</sourcerecordid><originalsourceid>FETCH-LOGICAL-p253t-f9961cdbc72ff5ba89b8a304b9c7835cbe936b4b24c3aa0fdcaa33190e2fc11d3</originalsourceid><addsrcrecordid>eNp9kE9LxDAUxIMoWFcPfoOCN6FrXtK0zVHWv7CgBwVvIUkTN0vbxKQV9ttb2QVvngaG33vDDEKXgJeAK3oDS4YBlxyOUAaMQVFXUB2jDGNeFqSkH6foLKUtxoTXdZOhu9dotEvOD_nGdyYP06A3bvjMZ0P7PvjkRpNbp0zMo3GD9VGbNg--2_WzFeRgunSOTqzskrk46AK9P9y_rZ6K9cvj8-p2XQTC6FhYzivQrdI1sZYp2XDVSIpLxXXdUKaV4bRSpSKlplJi22opKQWODbEaoKULdLX_G6L_mkwaxdZPcZgjBQGo5o4NkJm63lNJu1GOczURoutl3IlvHwWIw0IitPY_GLD4nfTvgP4ApstpEQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype><pqid>2116009812</pqid></control><display><type>conference_proceeding</type><title>Precision hole punching on composite fiber reinforced polymer panels</title><source>美国小型学会期刊集（AIP Scitation平台）</source><creator>Abdullah, A. B. ; Zain, M. S. M. ; Chan, H. Y. ; Samad, Z.</creator><contributor>Noorsal, Kartini ; Ibrahim, Suhaina Mohd</contributor><creatorcontrib>Abdullah, A. B. ; Zain, M. S. M. ; Chan, H. Y. ; Samad, Z. ; Noorsal, Kartini ; Ibrahim, Suhaina Mohd</creatorcontrib><description>Structural materials, such as composite panels, can only be assembled, and in most cases through the use of fasteners, which are fitted into the drilled holes. However, drilling is costly and time consuming, thus affecting productivity. This research aims to develop an alternative method to drilling. In this paper, the precision of the holes was measured and the effects of the die clearance to the areas around the holes were evaluated. Measurement and evaluation were performed based on the profile of the holes constructed using Alicona IFM, a 3D surface measurement technique. Results showed that punching is a potential alternative to drilling but still requires improvements.</description><identifier>ISSN: 0094-243X</identifier><identifier>EISSN: 1551-7616</identifier><identifier>DOI: 10.1063/1.5010491</identifier><identifier>CODEN: APCPCS</identifier><language>eng</language><publisher>Melville: American Institute of Physics</publisher><subject>Drilling ; Fasteners ; Fiber composites ; Fiber reinforced plastics ; Fiber reinforced polymers ; Measurement techniques ; Panels</subject><ispartof>AIP conference proceedings, 2017, Vol.1901 (1)</ispartof><rights>Author(s)</rights><rights>2017 Author(s). Published by AIP Publishing.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://pubs.aip.org/acp/article-lookup/doi/10.1063/1.5010491$$EHTML$$P50$$Gscitation$$H</linktohtml><link.rule.ids>309,310,314,780,784,789,790,794,4512,23930,23931,25140,27924,27925,76384</link.rule.ids></links><search><contributor>Noorsal, Kartini</contributor><contributor>Ibrahim, Suhaina Mohd</contributor><creatorcontrib>Abdullah, A. B.</creatorcontrib><creatorcontrib>Zain, M. S. M.</creatorcontrib><creatorcontrib>Chan, H. Y.</creatorcontrib><creatorcontrib>Samad, Z.</creatorcontrib><title>Precision hole punching on composite fiber reinforced polymer panels</title><title>AIP conference proceedings</title><description>Structural materials, such as composite panels, can only be assembled, and in most cases through the use of fasteners, which are fitted into the drilled holes. However, drilling is costly and time consuming, thus affecting productivity. This research aims to develop an alternative method to drilling. In this paper, the precision of the holes was measured and the effects of the die clearance to the areas around the holes were evaluated. Measurement and evaluation were performed based on the profile of the holes constructed using Alicona IFM, a 3D surface measurement technique. Results showed that punching is a potential alternative to drilling but still requires improvements.</description><subject>Drilling</subject><subject>Fasteners</subject><subject>Fiber composites</subject><subject>Fiber reinforced plastics</subject><subject>Fiber reinforced polymers</subject><subject>Measurement techniques</subject><subject>Panels</subject><issn>0094-243X</issn><issn>1551-7616</issn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>2017</creationdate><recordtype>conference_proceeding</recordtype><recordid>eNp9kE9LxDAUxIMoWFcPfoOCN6FrXtK0zVHWv7CgBwVvIUkTN0vbxKQV9ttb2QVvngaG33vDDEKXgJeAK3oDS4YBlxyOUAaMQVFXUB2jDGNeFqSkH6foLKUtxoTXdZOhu9dotEvOD_nGdyYP06A3bvjMZ0P7PvjkRpNbp0zMo3GD9VGbNg--2_WzFeRgunSOTqzskrk46AK9P9y_rZ6K9cvj8-p2XQTC6FhYzivQrdI1sZYp2XDVSIpLxXXdUKaV4bRSpSKlplJi22opKQWODbEaoKULdLX_G6L_mkwaxdZPcZgjBQGo5o4NkJm63lNJu1GOczURoutl3IlvHwWIw0IitPY_GLD4nfTvgP4ApstpEQ</recordid><startdate>20171204</startdate><enddate>20171204</enddate><creator>Abdullah, A. B.</creator><creator>Zain, M. S. M.</creator><creator>Chan, H. Y.</creator><creator>Samad, Z.</creator><general>American Institute of Physics</general><scope>8FD</scope><scope>H8D</scope><scope>L7M</scope></search><sort><creationdate>20171204</creationdate><title>Precision hole punching on composite fiber reinforced polymer panels</title><author>Abdullah, A. B. ; Zain, M. S. M. ; Chan, H. Y. ; Samad, Z.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-p253t-f9961cdbc72ff5ba89b8a304b9c7835cbe936b4b24c3aa0fdcaa33190e2fc11d3</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>2017</creationdate><topic>Drilling</topic><topic>Fasteners</topic><topic>Fiber composites</topic><topic>Fiber reinforced plastics</topic><topic>Fiber reinforced polymers</topic><topic>Measurement techniques</topic><topic>Panels</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Abdullah, A. B.</creatorcontrib><creatorcontrib>Zain, M. S. M.</creatorcontrib><creatorcontrib>Chan, H. Y.</creatorcontrib><creatorcontrib>Samad, Z.</creatorcontrib><collection>Technology Research Database</collection><collection>Aerospace Database</collection><collection>Advanced Technologies Database with Aerospace</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Abdullah, A. B.</au><au>Zain, M. S. M.</au><au>Chan, H. Y.</au><au>Samad, Z.</au><au>Noorsal, Kartini</au><au>Ibrahim, Suhaina Mohd</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>Precision hole punching on composite fiber reinforced polymer panels</atitle><btitle>AIP conference proceedings</btitle><date>2017-12-04</date><risdate>2017</risdate><volume>1901</volume><issue>1</issue><issn>0094-243X</issn><eissn>1551-7616</eissn><coden>APCPCS</coden><abstract>Structural materials, such as composite panels, can only be assembled, and in most cases through the use of fasteners, which are fitted into the drilled holes. However, drilling is costly and time consuming, thus affecting productivity. This research aims to develop an alternative method to drilling. In this paper, the precision of the holes was measured and the effects of the die clearance to the areas around the holes were evaluated. Measurement and evaluation were performed based on the profile of the holes constructed using Alicona IFM, a 3D surface measurement technique. Results showed that punching is a potential alternative to drilling but still requires improvements.</abstract><cop>Melville</cop><pub>American Institute of Physics</pub><doi>10.1063/1.5010491</doi><tpages>6</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0094-243X |
| ispartof | AIP conference proceedings, 2017, Vol.1901 (1) |
| issn | 0094-243X 1551-7616 |
| language | eng |
| recordid | cdi_proquest_journals_2116009812 |
| source | 美国小型学会期刊集（AIP Scitation平台） |
| subjects | Drilling Fasteners Fiber composites Fiber reinforced plastics Fiber reinforced polymers Measurement techniques Panels |
| title | Precision hole punching on composite fiber reinforced polymer panels |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T06%3A47%3A39IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_scita&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=Precision%20hole%20punching%20on%20composite%20fiber%20reinforced%20polymer%20panels&rft.btitle=AIP%20conference%20proceedings&rft.au=Abdullah,%20A.%20B.&rft.date=2017-12-04&rft.volume=1901&rft.issue=1&rft.issn=0094-243X&rft.eissn=1551-7616&rft.coden=APCPCS&rft_id=info:doi/10.1063/1.5010491&rft_dat=%3Cproquest_scita%3E2116009812%3C/proquest_scita%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2116009812&rft_id=info:pmid/&rfr_iscdi=true |