Multi-scale tribological and nanomechanical behavior of cold sprayed Ti^sub 2^AlC MAX phase coating

Ti2AlC based MAX phase coatings were successfully deposited on Inconel 625 substrate by a cold spraying technique. A dense coating of 70 µm thickness was deposited. Ball-on-disk wear behavior of Ti2AlC coating at room temperature (25 °C), and high temperature (600 °C) were studied. The coefficient o...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Surface & coatings technology 2018-01, Vol.334, p.384
Hauptverfasser: Loganathan, Archana, Sahu, Ashutosh, Rudolf, Chris, Zhang, Cheng, Rengifo, Sara, Laha, Tapas, Boesl, Benjamin, Agarwal, Arvind
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue
container_start_page 384
container_title Surface & coatings technology
container_volume 334
creator Loganathan, Archana
Sahu, Ashutosh
Rudolf, Chris
Zhang, Cheng
Rengifo, Sara
Laha, Tapas
Boesl, Benjamin
Agarwal, Arvind
description Ti2AlC based MAX phase coatings were successfully deposited on Inconel 625 substrate by a cold spraying technique. A dense coating of 70 µm thickness was deposited. Ball-on-disk wear behavior of Ti2AlC coating at room temperature (25 °C), and high temperature (600 °C) were studied. The coefficient of friction (COF) and wear volume loss at 600 °C reduced by ∼ 21% and ∼ 40% respectively, due to the lubricious nature of oxide layer formed at a higher temperature. Mechanical properties of the Ti2AlC coating were also studied by carrying out nanoindentation and nano-scratch tests at room temperature and 300 °C and varying loads. For a low load of 7000 µN at room temperature, Ti2AlC coating exhibited a higher elastic modulus of 273 GPa compared to the elastic modulus of 191 GPa at high temperature (300 °C). The room temperature nano-scratch at 7000 µN displayed brittle behavior with fracture, chipping and wear debris formation along the scratch path. However, high temperature (300 °C) scratch path exhibited ductile nature with plowing, cutting and no wear debris formation. The wear volume loss was several orders of magnitude higher at 8 N load scratch. The overall wear behavior in MAX phase Ti2AlC coating at multiple load scales is elucidated in terms of the interaction volume varying from a single to several splats in the cold sprayed structure.
format Article
fullrecord <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_journals_2019060415</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2019060415</sourcerecordid><originalsourceid>FETCH-proquest_journals_20190604153</originalsourceid><addsrcrecordid>eNqNissKwjAUBYMoWB__cMF1IX2ZZimiuHHnwlXlto1tSkxqkgr-vUX8AFfDmTMTEkQ542GSpGxKAhpnLMw5i-dk4VxHKY0YTwNSnQflZegqVAK8laVRppHjAtQ1aNTmIaoW9VeVosWXNBbMHSqjanC9xbeo4SILN5QQFzu1h_PuCn2LTowNeqmbFZndUTmx_nFJNsfDZX8Ke2ueg3D-1pnB6vG6xTTidEvTKEv-qz7LGkaW</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2019060415</pqid></control><display><type>article</type><title>Multi-scale tribological and nanomechanical behavior of cold sprayed Ti^sub 2^AlC MAX phase coating</title><source>Elsevier ScienceDirect Journals Complete</source><creator>Loganathan, Archana ; Sahu, Ashutosh ; Rudolf, Chris ; Zhang, Cheng ; Rengifo, Sara ; Laha, Tapas ; Boesl, Benjamin ; Agarwal, Arvind</creator><creatorcontrib>Loganathan, Archana ; Sahu, Ashutosh ; Rudolf, Chris ; Zhang, Cheng ; Rengifo, Sara ; Laha, Tapas ; Boesl, Benjamin ; Agarwal, Arvind</creatorcontrib><description>Ti2AlC based MAX phase coatings were successfully deposited on Inconel 625 substrate by a cold spraying technique. A dense coating of 70 µm thickness was deposited. Ball-on-disk wear behavior of Ti2AlC coating at room temperature (25 °C), and high temperature (600 °C) were studied. The coefficient of friction (COF) and wear volume loss at 600 °C reduced by ∼ 21% and ∼ 40% respectively, due to the lubricious nature of oxide layer formed at a higher temperature. Mechanical properties of the Ti2AlC coating were also studied by carrying out nanoindentation and nano-scratch tests at room temperature and 300 °C and varying loads. For a low load of 7000 µN at room temperature, Ti2AlC coating exhibited a higher elastic modulus of 273 GPa compared to the elastic modulus of 191 GPa at high temperature (300 °C). The room temperature nano-scratch at 7000 µN displayed brittle behavior with fracture, chipping and wear debris formation along the scratch path. However, high temperature (300 °C) scratch path exhibited ductile nature with plowing, cutting and no wear debris formation. The wear volume loss was several orders of magnitude higher at 8 N load scratch. The overall wear behavior in MAX phase Ti2AlC coating at multiple load scales is elucidated in terms of the interaction volume varying from a single to several splats in the cold sprayed structure.</description><identifier>ISSN: 0257-8972</identifier><identifier>EISSN: 1879-3347</identifier><language>eng</language><publisher>Lausanne: Elsevier BV</publisher><subject>Chipping ; Coefficient of friction ; Cold spraying ; Cutting wear ; Debris ; Mechanical properties ; Modulus of elasticity ; Nanoindentation ; Nickel base alloys ; Plasma spraying ; Plowing ; Scratch tests ; Studies ; Substrates ; Superalloys ; Titanium ; Tribology ; Wear particles ; Wear resistance</subject><ispartof>Surface &amp; coatings technology, 2018-01, Vol.334, p.384</ispartof><rights>Copyright Elsevier BV Jan 25, 2018</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784</link.rule.ids></links><search><creatorcontrib>Loganathan, Archana</creatorcontrib><creatorcontrib>Sahu, Ashutosh</creatorcontrib><creatorcontrib>Rudolf, Chris</creatorcontrib><creatorcontrib>Zhang, Cheng</creatorcontrib><creatorcontrib>Rengifo, Sara</creatorcontrib><creatorcontrib>Laha, Tapas</creatorcontrib><creatorcontrib>Boesl, Benjamin</creatorcontrib><creatorcontrib>Agarwal, Arvind</creatorcontrib><title>Multi-scale tribological and nanomechanical behavior of cold sprayed Ti^sub 2^AlC MAX phase coating</title><title>Surface &amp; coatings technology</title><description>Ti2AlC based MAX phase coatings were successfully deposited on Inconel 625 substrate by a cold spraying technique. A dense coating of 70 µm thickness was deposited. Ball-on-disk wear behavior of Ti2AlC coating at room temperature (25 °C), and high temperature (600 °C) were studied. The coefficient of friction (COF) and wear volume loss at 600 °C reduced by ∼ 21% and ∼ 40% respectively, due to the lubricious nature of oxide layer formed at a higher temperature. Mechanical properties of the Ti2AlC coating were also studied by carrying out nanoindentation and nano-scratch tests at room temperature and 300 °C and varying loads. For a low load of 7000 µN at room temperature, Ti2AlC coating exhibited a higher elastic modulus of 273 GPa compared to the elastic modulus of 191 GPa at high temperature (300 °C). The room temperature nano-scratch at 7000 µN displayed brittle behavior with fracture, chipping and wear debris formation along the scratch path. However, high temperature (300 °C) scratch path exhibited ductile nature with plowing, cutting and no wear debris formation. The wear volume loss was several orders of magnitude higher at 8 N load scratch. The overall wear behavior in MAX phase Ti2AlC coating at multiple load scales is elucidated in terms of the interaction volume varying from a single to several splats in the cold sprayed structure.</description><subject>Chipping</subject><subject>Coefficient of friction</subject><subject>Cold spraying</subject><subject>Cutting wear</subject><subject>Debris</subject><subject>Mechanical properties</subject><subject>Modulus of elasticity</subject><subject>Nanoindentation</subject><subject>Nickel base alloys</subject><subject>Plasma spraying</subject><subject>Plowing</subject><subject>Scratch tests</subject><subject>Studies</subject><subject>Substrates</subject><subject>Superalloys</subject><subject>Titanium</subject><subject>Tribology</subject><subject>Wear particles</subject><subject>Wear resistance</subject><issn>0257-8972</issn><issn>1879-3347</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2018</creationdate><recordtype>article</recordtype><recordid>eNqNissKwjAUBYMoWB__cMF1IX2ZZimiuHHnwlXlto1tSkxqkgr-vUX8AFfDmTMTEkQ542GSpGxKAhpnLMw5i-dk4VxHKY0YTwNSnQflZegqVAK8laVRppHjAtQ1aNTmIaoW9VeVosWXNBbMHSqjanC9xbeo4SILN5QQFzu1h_PuCn2LTowNeqmbFZndUTmx_nFJNsfDZX8Ke2ueg3D-1pnB6vG6xTTidEvTKEv-qz7LGkaW</recordid><startdate>20180125</startdate><enddate>20180125</enddate><creator>Loganathan, Archana</creator><creator>Sahu, Ashutosh</creator><creator>Rudolf, Chris</creator><creator>Zhang, Cheng</creator><creator>Rengifo, Sara</creator><creator>Laha, Tapas</creator><creator>Boesl, Benjamin</creator><creator>Agarwal, Arvind</creator><general>Elsevier BV</general><scope>7QQ</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20180125</creationdate><title>Multi-scale tribological and nanomechanical behavior of cold sprayed Ti^sub 2^AlC MAX phase coating</title><author>Loganathan, Archana ; Sahu, Ashutosh ; Rudolf, Chris ; Zhang, Cheng ; Rengifo, Sara ; Laha, Tapas ; Boesl, Benjamin ; Agarwal, Arvind</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_journals_20190604153</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2018</creationdate><topic>Chipping</topic><topic>Coefficient of friction</topic><topic>Cold spraying</topic><topic>Cutting wear</topic><topic>Debris</topic><topic>Mechanical properties</topic><topic>Modulus of elasticity</topic><topic>Nanoindentation</topic><topic>Nickel base alloys</topic><topic>Plasma spraying</topic><topic>Plowing</topic><topic>Scratch tests</topic><topic>Studies</topic><topic>Substrates</topic><topic>Superalloys</topic><topic>Titanium</topic><topic>Tribology</topic><topic>Wear particles</topic><topic>Wear resistance</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Loganathan, Archana</creatorcontrib><creatorcontrib>Sahu, Ashutosh</creatorcontrib><creatorcontrib>Rudolf, Chris</creatorcontrib><creatorcontrib>Zhang, Cheng</creatorcontrib><creatorcontrib>Rengifo, Sara</creatorcontrib><creatorcontrib>Laha, Tapas</creatorcontrib><creatorcontrib>Boesl, Benjamin</creatorcontrib><creatorcontrib>Agarwal, Arvind</creatorcontrib><collection>Ceramic Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Surface &amp; coatings technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Loganathan, Archana</au><au>Sahu, Ashutosh</au><au>Rudolf, Chris</au><au>Zhang, Cheng</au><au>Rengifo, Sara</au><au>Laha, Tapas</au><au>Boesl, Benjamin</au><au>Agarwal, Arvind</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Multi-scale tribological and nanomechanical behavior of cold sprayed Ti^sub 2^AlC MAX phase coating</atitle><jtitle>Surface &amp; coatings technology</jtitle><date>2018-01-25</date><risdate>2018</risdate><volume>334</volume><spage>384</spage><pages>384-</pages><issn>0257-8972</issn><eissn>1879-3347</eissn><abstract>Ti2AlC based MAX phase coatings were successfully deposited on Inconel 625 substrate by a cold spraying technique. A dense coating of 70 µm thickness was deposited. Ball-on-disk wear behavior of Ti2AlC coating at room temperature (25 °C), and high temperature (600 °C) were studied. The coefficient of friction (COF) and wear volume loss at 600 °C reduced by ∼ 21% and ∼ 40% respectively, due to the lubricious nature of oxide layer formed at a higher temperature. Mechanical properties of the Ti2AlC coating were also studied by carrying out nanoindentation and nano-scratch tests at room temperature and 300 °C and varying loads. For a low load of 7000 µN at room temperature, Ti2AlC coating exhibited a higher elastic modulus of 273 GPa compared to the elastic modulus of 191 GPa at high temperature (300 °C). The room temperature nano-scratch at 7000 µN displayed brittle behavior with fracture, chipping and wear debris formation along the scratch path. However, high temperature (300 °C) scratch path exhibited ductile nature with plowing, cutting and no wear debris formation. The wear volume loss was several orders of magnitude higher at 8 N load scratch. The overall wear behavior in MAX phase Ti2AlC coating at multiple load scales is elucidated in terms of the interaction volume varying from a single to several splats in the cold sprayed structure.</abstract><cop>Lausanne</cop><pub>Elsevier BV</pub></addata></record>
fulltext fulltext
identifier ISSN: 0257-8972
ispartof Surface & coatings technology, 2018-01, Vol.334, p.384
issn 0257-8972
1879-3347
language eng
recordid cdi_proquest_journals_2019060415
source Elsevier ScienceDirect Journals Complete
subjects Chipping
Coefficient of friction
Cold spraying
Cutting wear
Debris
Mechanical properties
Modulus of elasticity
Nanoindentation
Nickel base alloys
Plasma spraying
Plowing
Scratch tests
Studies
Substrates
Superalloys
Titanium
Tribology
Wear particles
Wear resistance
title Multi-scale tribological and nanomechanical behavior of cold sprayed Ti^sub 2^AlC MAX phase coating
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T11%3A16%3A04IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Multi-scale%20tribological%20and%20nanomechanical%20behavior%20of%20cold%20sprayed%20Ti%5Esub%202%5EAlC%20MAX%20phase%20coating&rft.jtitle=Surface%20&%20coatings%20technology&rft.au=Loganathan,%20Archana&rft.date=2018-01-25&rft.volume=334&rft.spage=384&rft.pages=384-&rft.issn=0257-8972&rft.eissn=1879-3347&rft_id=info:doi/&rft_dat=%3Cproquest%3E2019060415%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2019060415&rft_id=info:pmid/&rfr_iscdi=true