Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel

•Flow boiling study in a microgap channel with different spatial orientations.•Orientation effects on CHF, heat transfer coefficient and pressure drop were reported.•Orientation effects were negligible on flow boiling performances in microgap channel. Investigation on the effect of heat sink orienta...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:International journal of heat and mass transfer 2018-05, Vol.120, p.1341-1357
Hauptverfasser: Ajith Krishnan, R., Balasubramanian, K.R., Suresh, S.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 1357
container_issue
container_start_page 1341
container_title International journal of heat and mass transfer
container_volume 120
creator Ajith Krishnan, R.
Balasubramanian, K.R.
Suresh, S.
description •Flow boiling study in a microgap channel with different spatial orientations.•Orientation effects on CHF, heat transfer coefficient and pressure drop were reported.•Orientation effects were negligible on flow boiling performances in microgap channel. Investigation on the effect of heat sink orientation on the flow boiling performance in a rectangular microgap channel of width (w) 20 mm, length (L) 30 mm and depth (d) 220 µm with a hydraulic diameter (Dh) of 435 µm were performed. Experiments were conducted in different orientations such as horizontal downward facing (HD), horizontal upward facing (HU), horizontal with heating area vertically aligned (HV), vertical up flow orientation (VUF) and vertical downflow orientation (VDF) with mass fluxes (G) ranging from 193 to 911 kg/m2 s using deionized water as the working fluid. The experimental results were compared with the results of 31 parallel ‘U’ shaped microchannel study conducted by the authors earlier. The experimental results in microgap channel showed more or less similar critical heat flux (CHF) and heat transfer coefficients across all the orientations tested, indicating that the effect of gravity is negligible on the flow boiling performance in microgap channel. Even though the CHF and heat transfer coefficients for different orientations are comparable, the total pressure drop for vertical downflow orientation (VDF) was higher compared to other orientations. Significant pressure fluctuations were observed for the VDF orientation during flow boiling at low mass fluxes in the microgap channel. Comparison of flow boiling in the parallel microchannels with microgap channel depicts that the bubble growth pattern is entirely different. The bubble grows or elongates in both spanwise and axial directions in the case of the microgap channel which reduces the interaction between the flowing liquid and the vapour enabling the microgap channel to perform consistently at all orientations.
doi_str_mv 10.1016/j.ijheatmasstransfer.2017.12.133
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2019028047</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0017931017343648</els_id><sourcerecordid>2019028047</sourcerecordid><originalsourceid>FETCH-LOGICAL-c370t-f6b9459ea9ef99da0f4b20a3994ccbf3d2e08c9ea4311a62e7ce13e249dffb713</originalsourceid><addsrcrecordid>eNqNkctOwzAQRS0EEuXxD5bYsEnwIzT1DoTKS0hsYG1NnHHrkNrFTgt8An-No7Jjw8oazfWZmXsJOees5IxPL7rSdUuEYQUpDRF8shhLwXhdclFyKffIhM9qVQg-U_tkwnKnUJKzQ3KUUjeWrJpOyPf8c43RrdAP0FPnt5gGt4DBBU-DpcMSKVqLZhircR5Nzr_REN34YyfzNG0aE0KPLbV9-KBNcL3zC5rJNsQVeIMZTYHGDAK_2PQQ6cqZGBawpmYJ3mN_Qg4s9AlPf99j8no7f7m5L56e7x5urp8KI2s2FHbaqOpSISi0SrXAbNUIBlKpypjGylYgm5ncryTnMBVYG-QSRaVaa5uay2NytuOuY3jf5HN1FzbR55E626eYmLGqzqqrnSovmVJEq9fZJYhfmjM9BqA7_TeAkVBrLnQOICMedwjM12xd7iaTXTPYutEH3Qb3f9gPUrWf-Q</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2019028047</pqid></control><display><type>article</type><title>Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel</title><source>ScienceDirect Journals (5 years ago - present)</source><creator>Ajith Krishnan, R. ; Balasubramanian, K.R. ; Suresh, S.</creator><creatorcontrib>Ajith Krishnan, R. ; Balasubramanian, K.R. ; Suresh, S.</creatorcontrib><description>•Flow boiling study in a microgap channel with different spatial orientations.•Orientation effects on CHF, heat transfer coefficient and pressure drop were reported.•Orientation effects were negligible on flow boiling performances in microgap channel. Investigation on the effect of heat sink orientation on the flow boiling performance in a rectangular microgap channel of width (w) 20 mm, length (L) 30 mm and depth (d) 220 µm with a hydraulic diameter (Dh) of 435 µm were performed. Experiments were conducted in different orientations such as horizontal downward facing (HD), horizontal upward facing (HU), horizontal with heating area vertically aligned (HV), vertical up flow orientation (VUF) and vertical downflow orientation (VDF) with mass fluxes (G) ranging from 193 to 911 kg/m2 s using deionized water as the working fluid. The experimental results were compared with the results of 31 parallel ‘U’ shaped microchannel study conducted by the authors earlier. The experimental results in microgap channel showed more or less similar critical heat flux (CHF) and heat transfer coefficients across all the orientations tested, indicating that the effect of gravity is negligible on the flow boiling performance in microgap channel. Even though the CHF and heat transfer coefficients for different orientations are comparable, the total pressure drop for vertical downflow orientation (VDF) was higher compared to other orientations. Significant pressure fluctuations were observed for the VDF orientation during flow boiling at low mass fluxes in the microgap channel. Comparison of flow boiling in the parallel microchannels with microgap channel depicts that the bubble growth pattern is entirely different. The bubble grows or elongates in both spanwise and axial directions in the case of the microgap channel which reduces the interaction between the flowing liquid and the vapour enabling the microgap channel to perform consistently at all orientations.</description><identifier>ISSN: 0017-9310</identifier><identifier>EISSN: 1879-2189</identifier><identifier>DOI: 10.1016/j.ijheatmasstransfer.2017.12.133</identifier><language>eng</language><publisher>Oxford: Elsevier Ltd</publisher><subject>CHF ; Deionization ; Elongation ; Flow boiling ; Heat flux ; Heat transfer ; Heat transfer coefficient ; Heat transfer coefficients ; Heating ; Horizontal orientation ; Hydraulics ; Microchannels ; Microgap ; Orientation ; Orientation effects ; Pressure drop ; Variations ; Vertical orientation ; Working fluids</subject><ispartof>International journal of heat and mass transfer, 2018-05, Vol.120, p.1341-1357</ispartof><rights>2017 Elsevier Ltd</rights><rights>Copyright Elsevier BV May 2018</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c370t-f6b9459ea9ef99da0f4b20a3994ccbf3d2e08c9ea4311a62e7ce13e249dffb713</citedby><cites>FETCH-LOGICAL-c370t-f6b9459ea9ef99da0f4b20a3994ccbf3d2e08c9ea4311a62e7ce13e249dffb713</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.12.133$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,778,782,3539,27911,27912,45982</link.rule.ids></links><search><creatorcontrib>Ajith Krishnan, R.</creatorcontrib><creatorcontrib>Balasubramanian, K.R.</creatorcontrib><creatorcontrib>Suresh, S.</creatorcontrib><title>Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel</title><title>International journal of heat and mass transfer</title><description>•Flow boiling study in a microgap channel with different spatial orientations.•Orientation effects on CHF, heat transfer coefficient and pressure drop were reported.•Orientation effects were negligible on flow boiling performances in microgap channel. Investigation on the effect of heat sink orientation on the flow boiling performance in a rectangular microgap channel of width (w) 20 mm, length (L) 30 mm and depth (d) 220 µm with a hydraulic diameter (Dh) of 435 µm were performed. Experiments were conducted in different orientations such as horizontal downward facing (HD), horizontal upward facing (HU), horizontal with heating area vertically aligned (HV), vertical up flow orientation (VUF) and vertical downflow orientation (VDF) with mass fluxes (G) ranging from 193 to 911 kg/m2 s using deionized water as the working fluid. The experimental results were compared with the results of 31 parallel ‘U’ shaped microchannel study conducted by the authors earlier. The experimental results in microgap channel showed more or less similar critical heat flux (CHF) and heat transfer coefficients across all the orientations tested, indicating that the effect of gravity is negligible on the flow boiling performance in microgap channel. Even though the CHF and heat transfer coefficients for different orientations are comparable, the total pressure drop for vertical downflow orientation (VDF) was higher compared to other orientations. Significant pressure fluctuations were observed for the VDF orientation during flow boiling at low mass fluxes in the microgap channel. Comparison of flow boiling in the parallel microchannels with microgap channel depicts that the bubble growth pattern is entirely different. The bubble grows or elongates in both spanwise and axial directions in the case of the microgap channel which reduces the interaction between the flowing liquid and the vapour enabling the microgap channel to perform consistently at all orientations.</description><subject>CHF</subject><subject>Deionization</subject><subject>Elongation</subject><subject>Flow boiling</subject><subject>Heat flux</subject><subject>Heat transfer</subject><subject>Heat transfer coefficient</subject><subject>Heat transfer coefficients</subject><subject>Heating</subject><subject>Horizontal orientation</subject><subject>Hydraulics</subject><subject>Microchannels</subject><subject>Microgap</subject><subject>Orientation</subject><subject>Orientation effects</subject><subject>Pressure drop</subject><subject>Variations</subject><subject>Vertical orientation</subject><subject>Working fluids</subject><issn>0017-9310</issn><issn>1879-2189</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2018</creationdate><recordtype>article</recordtype><recordid>eNqNkctOwzAQRS0EEuXxD5bYsEnwIzT1DoTKS0hsYG1NnHHrkNrFTgt8An-No7Jjw8oazfWZmXsJOees5IxPL7rSdUuEYQUpDRF8shhLwXhdclFyKffIhM9qVQg-U_tkwnKnUJKzQ3KUUjeWrJpOyPf8c43RrdAP0FPnt5gGt4DBBU-DpcMSKVqLZhircR5Nzr_REN34YyfzNG0aE0KPLbV9-KBNcL3zC5rJNsQVeIMZTYHGDAK_2PQQ6cqZGBawpmYJ3mN_Qg4s9AlPf99j8no7f7m5L56e7x5urp8KI2s2FHbaqOpSISi0SrXAbNUIBlKpypjGylYgm5ncryTnMBVYG-QSRaVaa5uay2NytuOuY3jf5HN1FzbR55E626eYmLGqzqqrnSovmVJEq9fZJYhfmjM9BqA7_TeAkVBrLnQOICMedwjM12xd7iaTXTPYutEH3Qb3f9gPUrWf-Q</recordid><startdate>201805</startdate><enddate>201805</enddate><creator>Ajith Krishnan, R.</creator><creator>Balasubramanian, K.R.</creator><creator>Suresh, S.</creator><general>Elsevier Ltd</general><general>Elsevier BV</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7TB</scope><scope>8FD</scope><scope>FR3</scope><scope>H8D</scope><scope>KR7</scope><scope>L7M</scope></search><sort><creationdate>201805</creationdate><title>Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel</title><author>Ajith Krishnan, R. ; Balasubramanian, K.R. ; Suresh, S.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c370t-f6b9459ea9ef99da0f4b20a3994ccbf3d2e08c9ea4311a62e7ce13e249dffb713</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2018</creationdate><topic>CHF</topic><topic>Deionization</topic><topic>Elongation</topic><topic>Flow boiling</topic><topic>Heat flux</topic><topic>Heat transfer</topic><topic>Heat transfer coefficient</topic><topic>Heat transfer coefficients</topic><topic>Heating</topic><topic>Horizontal orientation</topic><topic>Hydraulics</topic><topic>Microchannels</topic><topic>Microgap</topic><topic>Orientation</topic><topic>Orientation effects</topic><topic>Pressure drop</topic><topic>Variations</topic><topic>Vertical orientation</topic><topic>Working fluids</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Ajith Krishnan, R.</creatorcontrib><creatorcontrib>Balasubramanian, K.R.</creatorcontrib><creatorcontrib>Suresh, S.</creatorcontrib><collection>CrossRef</collection><collection>Mechanical &amp; Transportation Engineering Abstracts</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Aerospace Database</collection><collection>Civil Engineering Abstracts</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>International journal of heat and mass transfer</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Ajith Krishnan, R.</au><au>Balasubramanian, K.R.</au><au>Suresh, S.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel</atitle><jtitle>International journal of heat and mass transfer</jtitle><date>2018-05</date><risdate>2018</risdate><volume>120</volume><spage>1341</spage><epage>1357</epage><pages>1341-1357</pages><issn>0017-9310</issn><eissn>1879-2189</eissn><abstract>•Flow boiling study in a microgap channel with different spatial orientations.•Orientation effects on CHF, heat transfer coefficient and pressure drop were reported.•Orientation effects were negligible on flow boiling performances in microgap channel. Investigation on the effect of heat sink orientation on the flow boiling performance in a rectangular microgap channel of width (w) 20 mm, length (L) 30 mm and depth (d) 220 µm with a hydraulic diameter (Dh) of 435 µm were performed. Experiments were conducted in different orientations such as horizontal downward facing (HD), horizontal upward facing (HU), horizontal with heating area vertically aligned (HV), vertical up flow orientation (VUF) and vertical downflow orientation (VDF) with mass fluxes (G) ranging from 193 to 911 kg/m2 s using deionized water as the working fluid. The experimental results were compared with the results of 31 parallel ‘U’ shaped microchannel study conducted by the authors earlier. The experimental results in microgap channel showed more or less similar critical heat flux (CHF) and heat transfer coefficients across all the orientations tested, indicating that the effect of gravity is negligible on the flow boiling performance in microgap channel. Even though the CHF and heat transfer coefficients for different orientations are comparable, the total pressure drop for vertical downflow orientation (VDF) was higher compared to other orientations. Significant pressure fluctuations were observed for the VDF orientation during flow boiling at low mass fluxes in the microgap channel. Comparison of flow boiling in the parallel microchannels with microgap channel depicts that the bubble growth pattern is entirely different. The bubble grows or elongates in both spanwise and axial directions in the case of the microgap channel which reduces the interaction between the flowing liquid and the vapour enabling the microgap channel to perform consistently at all orientations.</abstract><cop>Oxford</cop><pub>Elsevier Ltd</pub><doi>10.1016/j.ijheatmasstransfer.2017.12.133</doi><tpages>17</tpages></addata></record>
fulltext fulltext
identifier ISSN: 0017-9310
ispartof International journal of heat and mass transfer, 2018-05, Vol.120, p.1341-1357
issn 0017-9310
1879-2189
language eng
recordid cdi_proquest_journals_2019028047
source ScienceDirect Journals (5 years ago - present)
subjects CHF
Deionization
Elongation
Flow boiling
Heat flux
Heat transfer
Heat transfer coefficient
Heat transfer coefficients
Heating
Horizontal orientation
Hydraulics
Microchannels
Microgap
Orientation
Orientation effects
Pressure drop
Variations
Vertical orientation
Working fluids
title Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-15T17%3A39%3A22IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Experimental%20investigation%20of%20the%20effect%20of%20heat%20sink%20orientation%20on%20subcooled%20flow%20boiling%20performance%20in%20a%20rectangular%20microgap%20channel&rft.jtitle=International%20journal%20of%20heat%20and%20mass%20transfer&rft.au=Ajith%20Krishnan,%20R.&rft.date=2018-05&rft.volume=120&rft.spage=1341&rft.epage=1357&rft.pages=1341-1357&rft.issn=0017-9310&rft.eissn=1879-2189&rft_id=info:doi/10.1016/j.ijheatmasstransfer.2017.12.133&rft_dat=%3Cproquest_cross%3E2019028047%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2019028047&rft_id=info:pmid/&rft_els_id=S0017931017343648&rfr_iscdi=true