Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures

In the present study, the surface of AISI H13 hot-work tool steel was borided with EKabor II powders using powder pack-boriding method. The process was carried out at 800, 900 and 1000°C temperatures for 2, 4 and 6h periods. The wear tests were carried out using a ball-on disc tribometer at room tem...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Surface & coatings technology 2017-11, Vol.328, p.54-62
Hauptverfasser: Gök, Mustafa Sabri, Küçük, Yılmaz, Erdoğan, Azmi, Öge, Mecit, Kanca, Erdoğan, Günen, Ali
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 62
container_issue
container_start_page 54
container_title Surface & coatings technology
container_volume 328
creator Gök, Mustafa Sabri
Küçük, Yılmaz
Erdoğan, Azmi
Öge, Mecit
Kanca, Erdoğan
Günen, Ali
description In the present study, the surface of AISI H13 hot-work tool steel was borided with EKabor II powders using powder pack-boriding method. The process was carried out at 800, 900 and 1000°C temperatures for 2, 4 and 6h periods. The wear tests were carried out using a ball-on disc tribometer at room temperature and 500°C on borided and untreated AISI H13 hot-work tool steel. Scanning electron microscope (SEM), optical microscope, 3D profilometer, X-ray diffraction analysis and micro-hardness tester were used in the evaluation of micro-structure and wear data. The increase in the boriding temperature and boriding period led to increased thickness and hardness of the boride layer. Boriding at 800°C resulted with formation of Fe2B, Mn2B, Cr5B3, phases, while FeB, Fe2B, Mn2B, and Cr5B3 boride phases occurred at 900 and 1000°C. Dominant wear mechanisms were microcrack-induced plastic deformation during high temperature wear tests; oxidation and microcrack formation during room temperature wear tests; and oxidation and severe plastic deformation for the untreated specimen. •Boriding process was performed on AISI H13 steel by powder pack boriding.•Friction coefficients and wear mechanisms at room and 500°C were investigated.•Boriding was effective on the change of wear mechanism of the AISI H13.•Friction coefficient and volume loss values were higher at high temperature.•Wear mechanisms occurred depending on hardness and phase structures of AISI H13.
doi_str_mv 10.1016/j.surfcoat.2017.08.008
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_1967823579</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0257897217307855</els_id><sourcerecordid>1967823579</sourcerecordid><originalsourceid>FETCH-LOGICAL-c255t-f8f51e458909024a10fbf6eaba09f1cd0a03692cf10f90149e538365e19638fe3</originalsourceid><addsrcrecordid>eNqFkE1LAzEQhoMoWKt_QQKed51s9iO5KfUTCiLoOWR3JzZ129Qk29J_b6R69jSHed53mIeQSwY5A1ZfL_MwetM5HfMCWJODyAHEEZkw0ciM87I5JhMoqiYTsilOyVkIS4BEynJCXu_8nobB9nb9QXeoPW1xobfWeeoMbZ23PfZ04WK2c_6TRucGGiLiQHWkOOBWx7SPuNqg13H0GM7JidFDwIvfOSXvD_dvs6ds_vL4PLudZ11RVTEzwlQMy0pIkFCUmoFpTY261SAN63rQwGtZdCYtJLBSYsUFrytksubCIJ-Sq0PvxruvEUNUSzf6dTqpEtKIgleNTFR9oDrvQvBo1MbblfZ7xUD96FNL9adP_ehTIFTSl4I3hyCmH7YWvQqdxXWHvfXYRdU7-1_FNy-KfL4</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1967823579</pqid></control><display><type>article</type><title>Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures</title><source>Elsevier ScienceDirect Journals</source><creator>Gök, Mustafa Sabri ; Küçük, Yılmaz ; Erdoğan, Azmi ; Öge, Mecit ; Kanca, Erdoğan ; Günen, Ali</creator><creatorcontrib>Gök, Mustafa Sabri ; Küçük, Yılmaz ; Erdoğan, Azmi ; Öge, Mecit ; Kanca, Erdoğan ; Günen, Ali</creatorcontrib><description>In the present study, the surface of AISI H13 hot-work tool steel was borided with EKabor II powders using powder pack-boriding method. The process was carried out at 800, 900 and 1000°C temperatures for 2, 4 and 6h periods. The wear tests were carried out using a ball-on disc tribometer at room temperature and 500°C on borided and untreated AISI H13 hot-work tool steel. Scanning electron microscope (SEM), optical microscope, 3D profilometer, X-ray diffraction analysis and micro-hardness tester were used in the evaluation of micro-structure and wear data. The increase in the boriding temperature and boriding period led to increased thickness and hardness of the boride layer. Boriding at 800°C resulted with formation of Fe2B, Mn2B, Cr5B3, phases, while FeB, Fe2B, Mn2B, and Cr5B3 boride phases occurred at 900 and 1000°C. Dominant wear mechanisms were microcrack-induced plastic deformation during high temperature wear tests; oxidation and microcrack formation during room temperature wear tests; and oxidation and severe plastic deformation for the untreated specimen. •Boriding process was performed on AISI H13 steel by powder pack boriding.•Friction coefficients and wear mechanisms at room and 500°C were investigated.•Boriding was effective on the change of wear mechanism of the AISI H13.•Friction coefficient and volume loss values were higher at high temperature.•Wear mechanisms occurred depending on hardness and phase structures of AISI H13.</description><identifier>ISSN: 0257-8972</identifier><identifier>EISSN: 1879-3347</identifier><identifier>DOI: 10.1016/j.surfcoat.2017.08.008</identifier><language>eng</language><publisher>Lausanne: Elsevier B.V</publisher><subject>Boriding ; Deformation mechanisms ; Deformation wear ; Dry sliding wear ; Frictional wear ; High temperature wear ; Hot work tool steel ; Hot working ; Microhardness ; Oxidation ; Plastic deformation ; Sliding friction ; Steel ; Temperature ; Tool steels ; Wear mechanisms ; Wear tests</subject><ispartof>Surface &amp; coatings technology, 2017-11, Vol.328, p.54-62</ispartof><rights>2017 Elsevier B.V.</rights><rights>Copyright Elsevier BV Nov 15, 2017</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c255t-f8f51e458909024a10fbf6eaba09f1cd0a03692cf10f90149e538365e19638fe3</citedby><cites>FETCH-LOGICAL-c255t-f8f51e458909024a10fbf6eaba09f1cd0a03692cf10f90149e538365e19638fe3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.surfcoat.2017.08.008$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,777,781,3537,27905,27906,45976</link.rule.ids></links><search><creatorcontrib>Gök, Mustafa Sabri</creatorcontrib><creatorcontrib>Küçük, Yılmaz</creatorcontrib><creatorcontrib>Erdoğan, Azmi</creatorcontrib><creatorcontrib>Öge, Mecit</creatorcontrib><creatorcontrib>Kanca, Erdoğan</creatorcontrib><creatorcontrib>Günen, Ali</creatorcontrib><title>Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures</title><title>Surface &amp; coatings technology</title><description>In the present study, the surface of AISI H13 hot-work tool steel was borided with EKabor II powders using powder pack-boriding method. The process was carried out at 800, 900 and 1000°C temperatures for 2, 4 and 6h periods. The wear tests were carried out using a ball-on disc tribometer at room temperature and 500°C on borided and untreated AISI H13 hot-work tool steel. Scanning electron microscope (SEM), optical microscope, 3D profilometer, X-ray diffraction analysis and micro-hardness tester were used in the evaluation of micro-structure and wear data. The increase in the boriding temperature and boriding period led to increased thickness and hardness of the boride layer. Boriding at 800°C resulted with formation of Fe2B, Mn2B, Cr5B3, phases, while FeB, Fe2B, Mn2B, and Cr5B3 boride phases occurred at 900 and 1000°C. Dominant wear mechanisms were microcrack-induced plastic deformation during high temperature wear tests; oxidation and microcrack formation during room temperature wear tests; and oxidation and severe plastic deformation for the untreated specimen. •Boriding process was performed on AISI H13 steel by powder pack boriding.•Friction coefficients and wear mechanisms at room and 500°C were investigated.•Boriding was effective on the change of wear mechanism of the AISI H13.•Friction coefficient and volume loss values were higher at high temperature.•Wear mechanisms occurred depending on hardness and phase structures of AISI H13.</description><subject>Boriding</subject><subject>Deformation mechanisms</subject><subject>Deformation wear</subject><subject>Dry sliding wear</subject><subject>Frictional wear</subject><subject>High temperature wear</subject><subject>Hot work tool steel</subject><subject>Hot working</subject><subject>Microhardness</subject><subject>Oxidation</subject><subject>Plastic deformation</subject><subject>Sliding friction</subject><subject>Steel</subject><subject>Temperature</subject><subject>Tool steels</subject><subject>Wear mechanisms</subject><subject>Wear tests</subject><issn>0257-8972</issn><issn>1879-3347</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2017</creationdate><recordtype>article</recordtype><recordid>eNqFkE1LAzEQhoMoWKt_QQKed51s9iO5KfUTCiLoOWR3JzZ129Qk29J_b6R69jSHed53mIeQSwY5A1ZfL_MwetM5HfMCWJODyAHEEZkw0ciM87I5JhMoqiYTsilOyVkIS4BEynJCXu_8nobB9nb9QXeoPW1xobfWeeoMbZ23PfZ04WK2c_6TRucGGiLiQHWkOOBWx7SPuNqg13H0GM7JidFDwIvfOSXvD_dvs6ds_vL4PLudZ11RVTEzwlQMy0pIkFCUmoFpTY261SAN63rQwGtZdCYtJLBSYsUFrytksubCIJ-Sq0PvxruvEUNUSzf6dTqpEtKIgleNTFR9oDrvQvBo1MbblfZ7xUD96FNL9adP_ehTIFTSl4I3hyCmH7YWvQqdxXWHvfXYRdU7-1_FNy-KfL4</recordid><startdate>20171115</startdate><enddate>20171115</enddate><creator>Gök, Mustafa Sabri</creator><creator>Küçük, Yılmaz</creator><creator>Erdoğan, Azmi</creator><creator>Öge, Mecit</creator><creator>Kanca, Erdoğan</creator><creator>Günen, Ali</creator><general>Elsevier B.V</general><general>Elsevier BV</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7QQ</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20171115</creationdate><title>Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures</title><author>Gök, Mustafa Sabri ; Küçük, Yılmaz ; Erdoğan, Azmi ; Öge, Mecit ; Kanca, Erdoğan ; Günen, Ali</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c255t-f8f51e458909024a10fbf6eaba09f1cd0a03692cf10f90149e538365e19638fe3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2017</creationdate><topic>Boriding</topic><topic>Deformation mechanisms</topic><topic>Deformation wear</topic><topic>Dry sliding wear</topic><topic>Frictional wear</topic><topic>High temperature wear</topic><topic>Hot work tool steel</topic><topic>Hot working</topic><topic>Microhardness</topic><topic>Oxidation</topic><topic>Plastic deformation</topic><topic>Sliding friction</topic><topic>Steel</topic><topic>Temperature</topic><topic>Tool steels</topic><topic>Wear mechanisms</topic><topic>Wear tests</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Gök, Mustafa Sabri</creatorcontrib><creatorcontrib>Küçük, Yılmaz</creatorcontrib><creatorcontrib>Erdoğan, Azmi</creatorcontrib><creatorcontrib>Öge, Mecit</creatorcontrib><creatorcontrib>Kanca, Erdoğan</creatorcontrib><creatorcontrib>Günen, Ali</creatorcontrib><collection>CrossRef</collection><collection>Ceramic Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Surface &amp; coatings technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Gök, Mustafa Sabri</au><au>Küçük, Yılmaz</au><au>Erdoğan, Azmi</au><au>Öge, Mecit</au><au>Kanca, Erdoğan</au><au>Günen, Ali</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures</atitle><jtitle>Surface &amp; coatings technology</jtitle><date>2017-11-15</date><risdate>2017</risdate><volume>328</volume><spage>54</spage><epage>62</epage><pages>54-62</pages><issn>0257-8972</issn><eissn>1879-3347</eissn><abstract>In the present study, the surface of AISI H13 hot-work tool steel was borided with EKabor II powders using powder pack-boriding method. The process was carried out at 800, 900 and 1000°C temperatures for 2, 4 and 6h periods. The wear tests were carried out using a ball-on disc tribometer at room temperature and 500°C on borided and untreated AISI H13 hot-work tool steel. Scanning electron microscope (SEM), optical microscope, 3D profilometer, X-ray diffraction analysis and micro-hardness tester were used in the evaluation of micro-structure and wear data. The increase in the boriding temperature and boriding period led to increased thickness and hardness of the boride layer. Boriding at 800°C resulted with formation of Fe2B, Mn2B, Cr5B3, phases, while FeB, Fe2B, Mn2B, and Cr5B3 boride phases occurred at 900 and 1000°C. Dominant wear mechanisms were microcrack-induced plastic deformation during high temperature wear tests; oxidation and microcrack formation during room temperature wear tests; and oxidation and severe plastic deformation for the untreated specimen. •Boriding process was performed on AISI H13 steel by powder pack boriding.•Friction coefficients and wear mechanisms at room and 500°C were investigated.•Boriding was effective on the change of wear mechanism of the AISI H13.•Friction coefficient and volume loss values were higher at high temperature.•Wear mechanisms occurred depending on hardness and phase structures of AISI H13.</abstract><cop>Lausanne</cop><pub>Elsevier B.V</pub><doi>10.1016/j.surfcoat.2017.08.008</doi><tpages>9</tpages></addata></record>
fulltext fulltext
identifier ISSN: 0257-8972
ispartof Surface & coatings technology, 2017-11, Vol.328, p.54-62
issn 0257-8972
1879-3347
language eng
recordid cdi_proquest_journals_1967823579
source Elsevier ScienceDirect Journals
subjects Boriding
Deformation mechanisms
Deformation wear
Dry sliding wear
Frictional wear
High temperature wear
Hot work tool steel
Hot working
Microhardness
Oxidation
Plastic deformation
Sliding friction
Steel
Temperature
Tool steels
Wear mechanisms
Wear tests
title Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-18T10%3A56%3A34IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Dry%20sliding%20wear%20behavior%20of%20borided%20hot-work%20tool%20steel%20at%20elevated%20temperatures&rft.jtitle=Surface%20&%20coatings%20technology&rft.au=G%C3%B6k,%20Mustafa%20Sabri&rft.date=2017-11-15&rft.volume=328&rft.spage=54&rft.epage=62&rft.pages=54-62&rft.issn=0257-8972&rft.eissn=1879-3347&rft_id=info:doi/10.1016/j.surfcoat.2017.08.008&rft_dat=%3Cproquest_cross%3E1967823579%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1967823579&rft_id=info:pmid/&rft_els_id=S0257897217307855&rfr_iscdi=true