Determination of the mechanical properties of radiata pine timber by means of longitudinal and transverse vibration methods

Bending properties have been determined by mechanical testing [modulus of elasticity (MOE) and modulus of rupture (MOR)] and by means of longitudinal (L) and transverse (T) vibration nondestructive methods on 150 sawn timber pieces of D. Don, with the dimensions of 80×120 mm cross-section and 2500 mm long, from Catalonia, Spain. The fundamental vibration frequency was measured by recording the sound produced by hitting the piece in L and T directions, and this signal was analyzed by fast Fourier transform sound analyzer. The dynamic MOE was obtained for both procedures and compared with static MOE and MOR. The notion of concentrated knot diameter ratio (CKDR) was introduced to improve the prediction of MOR. CKDR gives better results when this parameter is referred to the central portion of piece length. Both methods (L and T frequencies) have similar accuracy in prediction of mechanical properties, but the first one is simpler and has some practical advantages. The timber graded with this nondestructive method offers better results than the visual grading rules for the same output.