Measurement of Bending Strength Using Specimens Cut from Commercially Produced High-Strength Porcelains

Measurement of Bending Strength Using Specimens Cut from Commercially Produced High-Strength Porcelains

To estimate the strength of commercially produced porcelains, specimens must be cut from the commercial products. In this study, the effects of sample preparation processes, such as cutting or grinding, and measuring methods on the bending strength and its distribution were investigated for the spec...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of the Ceramic Society of Japan 1996-01, Vol.104 (1211), p.604
Hauptverfasser: KOBAYASHI, Yuichi, HIRAI, Toshio, OHIRA, Osamu, ISOYAMA, Hirohumi, KATO, Etsuro
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue 1211
container_start_page 604
container_title Journal of the Ceramic Society of Japan
container_volume 104
creator KOBAYASHI, Yuichi
HIRAI, Toshio
OHIRA, Osamu
ISOYAMA, Hirohumi
KATO, Etsuro
description To estimate the strength of commercially produced porcelains, specimens must be cut from the commercial products. In this study, the effects of sample preparation processes, such as cutting or grinding, and measuring methods on the bending strength and its distribution were investigated for the specimens cut from commercial products, and compared with those of slip-cast specimens. The bending strength of specimens cut from traditional porcelains, which is smaller than 150MPa, agreed well with that of slip-cast specimens irrespective of sample preparation method. On the other hand, in the case of high-strength glazed porcelain products, which show values larger than 250MPa, the bending strength was estimated accurately by eliminating the chipping in glaze or cracks in the body by means of grinding away over 150μm on one side with a #400 diamond wheel, and agreed well with that of slip-cast specimens.
format Article
fullrecord <record><control><sourceid>proquest</sourceid><recordid>TN_cdi_proquest_journals_1445791345</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>3110429251</sourcerecordid><originalsourceid>FETCH-proquest_journals_14457913453</originalsourceid><addsrcrecordid>eNqNjk0LgkAYhJcoyD7-wwudBXXXj65J4SUQqrOIvuqK7tp-HPr3SUTnTjPDPAOzII5PWeJGIQ2Xs0-SwPViRtdko3XveVHAaOKQ9oqltgpHFAZkAycUNRct3IxC0ZoOHvoTJ6z4zGhIrYFGyRFSOY6oKl4OwwtyJWtbYQ0Zbzv3N86lqnAoudA7smrKQeP-q1tyuJzvaeZOSj4talP00ioxV4XPWBgf5_Mh_Y96A0iQSP4</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1445791345</pqid></control><display><type>article</type><title>Measurement of Bending Strength Using Specimens Cut from Commercially Produced High-Strength Porcelains</title><source>Free Full-Text Journals in Chemistry</source><creator>KOBAYASHI, Yuichi ; HIRAI, Toshio ; OHIRA, Osamu ; ISOYAMA, Hirohumi ; KATO, Etsuro</creator><creatorcontrib>KOBAYASHI, Yuichi ; HIRAI, Toshio ; OHIRA, Osamu ; ISOYAMA, Hirohumi ; KATO, Etsuro</creatorcontrib><description>To estimate the strength of commercially produced porcelains, specimens must be cut from the commercial products. In this study, the effects of sample preparation processes, such as cutting or grinding, and measuring methods on the bending strength and its distribution were investigated for the specimens cut from commercial products, and compared with those of slip-cast specimens. The bending strength of specimens cut from traditional porcelains, which is smaller than 150MPa, agreed well with that of slip-cast specimens irrespective of sample preparation method. On the other hand, in the case of high-strength glazed porcelain products, which show values larger than 250MPa, the bending strength was estimated accurately by eliminating the chipping in glaze or cracks in the body by means of grinding away over 150μm on one side with a #400 diamond wheel, and agreed well with that of slip-cast specimens.</description><identifier>ISSN: 1882-0743</identifier><identifier>EISSN: 1348-6535</identifier><language>eng</language><publisher>Tokyo: Japan Science and Technology Agency</publisher><ispartof>Journal of the Ceramic Society of Japan, 1996-01, Vol.104 (1211), p.604</ispartof><rights>Copyright Japan Science and Technology Agency 1996</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780</link.rule.ids></links><search><creatorcontrib>KOBAYASHI, Yuichi</creatorcontrib><creatorcontrib>HIRAI, Toshio</creatorcontrib><creatorcontrib>OHIRA, Osamu</creatorcontrib><creatorcontrib>ISOYAMA, Hirohumi</creatorcontrib><creatorcontrib>KATO, Etsuro</creatorcontrib><title>Measurement of Bending Strength Using Specimens Cut from Commercially Produced High-Strength Porcelains</title><title>Journal of the Ceramic Society of Japan</title><description>To estimate the strength of commercially produced porcelains, specimens must be cut from the commercial products. In this study, the effects of sample preparation processes, such as cutting or grinding, and measuring methods on the bending strength and its distribution were investigated for the specimens cut from commercial products, and compared with those of slip-cast specimens. The bending strength of specimens cut from traditional porcelains, which is smaller than 150MPa, agreed well with that of slip-cast specimens irrespective of sample preparation method. On the other hand, in the case of high-strength glazed porcelain products, which show values larger than 250MPa, the bending strength was estimated accurately by eliminating the chipping in glaze or cracks in the body by means of grinding away over 150μm on one side with a #400 diamond wheel, and agreed well with that of slip-cast specimens.</description><issn>1882-0743</issn><issn>1348-6535</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1996</creationdate><recordtype>article</recordtype><recordid>eNqNjk0LgkAYhJcoyD7-wwudBXXXj65J4SUQqrOIvuqK7tp-HPr3SUTnTjPDPAOzII5PWeJGIQ2Xs0-SwPViRtdko3XveVHAaOKQ9oqltgpHFAZkAycUNRct3IxC0ZoOHvoTJ6z4zGhIrYFGyRFSOY6oKl4OwwtyJWtbYQ0Zbzv3N86lqnAoudA7smrKQeP-q1tyuJzvaeZOSj4talP00ioxV4XPWBgf5_Mh_Y96A0iQSP4</recordid><startdate>19960101</startdate><enddate>19960101</enddate><creator>KOBAYASHI, Yuichi</creator><creator>HIRAI, Toshio</creator><creator>OHIRA, Osamu</creator><creator>ISOYAMA, Hirohumi</creator><creator>KATO, Etsuro</creator><general>Japan Science and Technology Agency</general><scope>7QQ</scope><scope>7SR</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>19960101</creationdate><title>Measurement of Bending Strength Using Specimens Cut from Commercially Produced High-Strength Porcelains</title><author>KOBAYASHI, Yuichi ; HIRAI, Toshio ; OHIRA, Osamu ; ISOYAMA, Hirohumi ; KATO, Etsuro</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-proquest_journals_14457913453</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1996</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>KOBAYASHI, Yuichi</creatorcontrib><creatorcontrib>HIRAI, Toshio</creatorcontrib><creatorcontrib>OHIRA, Osamu</creatorcontrib><creatorcontrib>ISOYAMA, Hirohumi</creatorcontrib><creatorcontrib>KATO, Etsuro</creatorcontrib><collection>Ceramic Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Journal of the Ceramic Society of Japan</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>KOBAYASHI, Yuichi</au><au>HIRAI, Toshio</au><au>OHIRA, Osamu</au><au>ISOYAMA, Hirohumi</au><au>KATO, Etsuro</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Measurement of Bending Strength Using Specimens Cut from Commercially Produced High-Strength Porcelains</atitle><jtitle>Journal of the Ceramic Society of Japan</jtitle><date>1996-01-01</date><risdate>1996</risdate><volume>104</volume><issue>1211</issue><spage>604</spage><pages>604-</pages><issn>1882-0743</issn><eissn>1348-6535</eissn><abstract>To estimate the strength of commercially produced porcelains, specimens must be cut from the commercial products. In this study, the effects of sample preparation processes, such as cutting or grinding, and measuring methods on the bending strength and its distribution were investigated for the specimens cut from commercial products, and compared with those of slip-cast specimens. The bending strength of specimens cut from traditional porcelains, which is smaller than 150MPa, agreed well with that of slip-cast specimens irrespective of sample preparation method. On the other hand, in the case of high-strength glazed porcelain products, which show values larger than 250MPa, the bending strength was estimated accurately by eliminating the chipping in glaze or cracks in the body by means of grinding away over 150μm on one side with a #400 diamond wheel, and agreed well with that of slip-cast specimens.</abstract><cop>Tokyo</cop><pub>Japan Science and Technology Agency</pub></addata></record>
fulltext fulltext
identifier ISSN: 1882-0743
ispartof Journal of the Ceramic Society of Japan, 1996-01, Vol.104 (1211), p.604
issn 1882-0743
1348-6535
language eng
recordid cdi_proquest_journals_1445791345
source Free Full-Text Journals in Chemistry
title Measurement of Bending Strength Using Specimens Cut from Commercially Produced High-Strength Porcelains
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-24T10%3A39%3A22IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Measurement%20of%20Bending%20Strength%20Using%20Specimens%20Cut%20from%20Commercially%20Produced%20High-Strength%20Porcelains&rft.jtitle=Journal%20of%20the%20Ceramic%20Society%20of%20Japan&rft.au=KOBAYASHI,%20Yuichi&rft.date=1996-01-01&rft.volume=104&rft.issue=1211&rft.spage=604&rft.pages=604-&rft.issn=1882-0743&rft.eissn=1348-6535&rft_id=info:doi/&rft_dat=%3Cproquest%3E3110429251%3C/proquest%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1445791345&rft_id=info:pmid/&rfr_iscdi=true