Performance characterization of nanofiltration, reverse osmosis, and ion exchange technologies for acetic acid separation

[Display omitted] •Five anion-exchange resins and five pressure-driven membranes were tested to recover acetic acid in aqueous solution.•Resin adsorption phenomena were evaluated with isotherm and kinetic models.•IRN-78 was determined to be the best-performing resin for acetic acid separation when s...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Separation and purification technology 2021-06, Vol.265, p.118108, Article 118108
Hauptverfasser: Wu, Haoran, Valentino, Lauren, Riggio, Sean, Holtzapple, Mark, Urgun-Demirtas, Meltem
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue
container_start_page 118108
container_title Separation and purification technology
container_volume 265
creator Wu, Haoran
Valentino, Lauren
Riggio, Sean
Holtzapple, Mark
Urgun-Demirtas, Meltem
description [Display omitted] •Five anion-exchange resins and five pressure-driven membranes were tested to recover acetic acid in aqueous solution.•Resin adsorption phenomena were evaluated with isotherm and kinetic models.•IRN-78 was determined to be the best-performing resin for acetic acid separation when solution pH was greater than pKa of acetic acid.•Solution diffusion model was successfully used to fit the experimental data for membrane separation.•Reverse osmosis membrane (BW30XFR) achieved the highest acetic acid rejection (98.6%). A major obstacle to widespread implementation of bio-based fuels and chemicals is the lack of efficient and cost-effective separation methods. To purify acetic acid produced by biochemical conversion of biomass via anaerobic digestion, this work employs two commonly used separation technologies: (1) ion-exchange (IX) resin and (2) pressure-driven membranes. This study tested five commercially available strong- and weak-base anion-exchange resins and five commercially available nanofiltration (NF) and reverse osmosis (RO) membranes. The pH of the feed solution significantly affected adsorption capacity. At pH 6.3, a strong-base IX resin (IRN-78) performed best (95.1% acetate removal). With strong-base IX resins, the Langmuir isotherm model fit well, whereas for weak-base IX resins, the Freundlich isotherm provided a better fit. A pseudo-second-order kinetic model fit well for both IRN-78 and IRA-67. Regarding membrane separation, RO (BW30XFR membrane) achieved the highest rejection (98.6% acetate rejection), whereas an NF membrane (NF*) achieved the best combination of permeate flux (105 L/(h·m2)) and rejection (83.1% acetate rejection). For membrane performance, the experimental data were fit using the solution diffusion model. Increased pH in the feed solution lowered permeate flux but increased acetic acid rejection. When the acetic acid concentration in the feed solution increased, both permeate flux and acetic acid rejection decreased for membrane NF*.
doi_str_mv 10.1016/j.seppur.2020.118108
format Article
fullrecord <record><control><sourceid>elsevier_osti_</sourceid><recordid>TN_cdi_osti_scitechconnect_1798306</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S1383586620325818</els_id><sourcerecordid>S1383586620325818</sourcerecordid><originalsourceid>FETCH-LOGICAL-c379t-81a017251dca7b7776abec21a01ea0407f268d5bf6edf778c82e24af9893715c3</originalsourceid><addsrcrecordid>eNp9kE1LAzEYhIMoWKv_wEPw3F2T7EeyF0GKX1DQg55Dmn3TprRJSWKx_nqzrmdPbxhmHiaD0DUlJSW0vd2UEfb7z1AywrJEBSXiBE2o4FVR8a4-ze9KVEUj2vYcXcS4IYRyKtgEHd8gGB92ymnAeq2C0gmC_VbJeoe9wU45b-w2hV9lhgMcIETAPu58tHGGlevx4IWvHHcrwAn02vmtX1mIOLOx0pCszsf2OBdVI-oSnRm1jXD1d6fo4_Hhff5cLF6fXub3i0Ln6qkQVOWurKG9VnzJOW_VEjQbVFCkJtywVvTN0rTQG86FFgxYrUwnuorTRldTdDNyfUxWRm2Hfto7BzpJyjtRkTab6tGkg48xgJH7YHcqHCUlcthYbuS4sRw2luPGOXY3xiB_4GAhDHzIU_Y2DPje2_8BP1PPig4</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Performance characterization of nanofiltration, reverse osmosis, and ion exchange technologies for acetic acid separation</title><source>Elsevier ScienceDirect Journals</source><creator>Wu, Haoran ; Valentino, Lauren ; Riggio, Sean ; Holtzapple, Mark ; Urgun-Demirtas, Meltem</creator><creatorcontrib>Wu, Haoran ; Valentino, Lauren ; Riggio, Sean ; Holtzapple, Mark ; Urgun-Demirtas, Meltem ; Argonne National Lab. (ANL), Argonne, IL (United States)</creatorcontrib><description>[Display omitted] •Five anion-exchange resins and five pressure-driven membranes were tested to recover acetic acid in aqueous solution.•Resin adsorption phenomena were evaluated with isotherm and kinetic models.•IRN-78 was determined to be the best-performing resin for acetic acid separation when solution pH was greater than pKa of acetic acid.•Solution diffusion model was successfully used to fit the experimental data for membrane separation.•Reverse osmosis membrane (BW30XFR) achieved the highest acetic acid rejection (98.6%). A major obstacle to widespread implementation of bio-based fuels and chemicals is the lack of efficient and cost-effective separation methods. To purify acetic acid produced by biochemical conversion of biomass via anaerobic digestion, this work employs two commonly used separation technologies: (1) ion-exchange (IX) resin and (2) pressure-driven membranes. This study tested five commercially available strong- and weak-base anion-exchange resins and five commercially available nanofiltration (NF) and reverse osmosis (RO) membranes. The pH of the feed solution significantly affected adsorption capacity. At pH 6.3, a strong-base IX resin (IRN-78) performed best (95.1% acetate removal). With strong-base IX resins, the Langmuir isotherm model fit well, whereas for weak-base IX resins, the Freundlich isotherm provided a better fit. A pseudo-second-order kinetic model fit well for both IRN-78 and IRA-67. Regarding membrane separation, RO (BW30XFR membrane) achieved the highest rejection (98.6% acetate rejection), whereas an NF membrane (NF*) achieved the best combination of permeate flux (105 L/(h·m2)) and rejection (83.1% acetate rejection). For membrane performance, the experimental data were fit using the solution diffusion model. Increased pH in the feed solution lowered permeate flux but increased acetic acid rejection. When the acetic acid concentration in the feed solution increased, both permeate flux and acetic acid rejection decreased for membrane NF*.</description><identifier>ISSN: 1383-5866</identifier><identifier>EISSN: 1873-3794</identifier><identifier>DOI: 10.1016/j.seppur.2020.118108</identifier><language>eng</language><publisher>United States: Elsevier B.V</publisher><subject>Acetate ; Adsorption ; Anion-exchange resin ; INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY ; Membrane ; Separation</subject><ispartof>Separation and purification technology, 2021-06, Vol.265, p.118108, Article 118108</ispartof><rights>2020</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c379t-81a017251dca7b7776abec21a01ea0407f268d5bf6edf778c82e24af9893715c3</citedby><cites>FETCH-LOGICAL-c379t-81a017251dca7b7776abec21a01ea0407f268d5bf6edf778c82e24af9893715c3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S1383586620325818$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>230,314,776,780,881,3536,27903,27904,65309</link.rule.ids><backlink>$$Uhttps://www.osti.gov/servlets/purl/1798306$$D View this record in Osti.gov$$Hfree_for_read</backlink></links><search><creatorcontrib>Wu, Haoran</creatorcontrib><creatorcontrib>Valentino, Lauren</creatorcontrib><creatorcontrib>Riggio, Sean</creatorcontrib><creatorcontrib>Holtzapple, Mark</creatorcontrib><creatorcontrib>Urgun-Demirtas, Meltem</creatorcontrib><creatorcontrib>Argonne National Lab. (ANL), Argonne, IL (United States)</creatorcontrib><title>Performance characterization of nanofiltration, reverse osmosis, and ion exchange technologies for acetic acid separation</title><title>Separation and purification technology</title><description>[Display omitted] •Five anion-exchange resins and five pressure-driven membranes were tested to recover acetic acid in aqueous solution.•Resin adsorption phenomena were evaluated with isotherm and kinetic models.•IRN-78 was determined to be the best-performing resin for acetic acid separation when solution pH was greater than pKa of acetic acid.•Solution diffusion model was successfully used to fit the experimental data for membrane separation.•Reverse osmosis membrane (BW30XFR) achieved the highest acetic acid rejection (98.6%). A major obstacle to widespread implementation of bio-based fuels and chemicals is the lack of efficient and cost-effective separation methods. To purify acetic acid produced by biochemical conversion of biomass via anaerobic digestion, this work employs two commonly used separation technologies: (1) ion-exchange (IX) resin and (2) pressure-driven membranes. This study tested five commercially available strong- and weak-base anion-exchange resins and five commercially available nanofiltration (NF) and reverse osmosis (RO) membranes. The pH of the feed solution significantly affected adsorption capacity. At pH 6.3, a strong-base IX resin (IRN-78) performed best (95.1% acetate removal). With strong-base IX resins, the Langmuir isotherm model fit well, whereas for weak-base IX resins, the Freundlich isotherm provided a better fit. A pseudo-second-order kinetic model fit well for both IRN-78 and IRA-67. Regarding membrane separation, RO (BW30XFR membrane) achieved the highest rejection (98.6% acetate rejection), whereas an NF membrane (NF*) achieved the best combination of permeate flux (105 L/(h·m2)) and rejection (83.1% acetate rejection). For membrane performance, the experimental data were fit using the solution diffusion model. Increased pH in the feed solution lowered permeate flux but increased acetic acid rejection. When the acetic acid concentration in the feed solution increased, both permeate flux and acetic acid rejection decreased for membrane NF*.</description><subject>Acetate</subject><subject>Adsorption</subject><subject>Anion-exchange resin</subject><subject>INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY</subject><subject>Membrane</subject><subject>Separation</subject><issn>1383-5866</issn><issn>1873-3794</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2021</creationdate><recordtype>article</recordtype><recordid>eNp9kE1LAzEYhIMoWKv_wEPw3F2T7EeyF0GKX1DQg55Dmn3TprRJSWKx_nqzrmdPbxhmHiaD0DUlJSW0vd2UEfb7z1AywrJEBSXiBE2o4FVR8a4-ze9KVEUj2vYcXcS4IYRyKtgEHd8gGB92ymnAeq2C0gmC_VbJeoe9wU45b-w2hV9lhgMcIETAPu58tHGGlevx4IWvHHcrwAn02vmtX1mIOLOx0pCszsf2OBdVI-oSnRm1jXD1d6fo4_Hhff5cLF6fXub3i0Ln6qkQVOWurKG9VnzJOW_VEjQbVFCkJtywVvTN0rTQG86FFgxYrUwnuorTRldTdDNyfUxWRm2Hfto7BzpJyjtRkTab6tGkg48xgJH7YHcqHCUlcthYbuS4sRw2luPGOXY3xiB_4GAhDHzIU_Y2DPje2_8BP1PPig4</recordid><startdate>20210615</startdate><enddate>20210615</enddate><creator>Wu, Haoran</creator><creator>Valentino, Lauren</creator><creator>Riggio, Sean</creator><creator>Holtzapple, Mark</creator><creator>Urgun-Demirtas, Meltem</creator><general>Elsevier B.V</general><general>Elsevier</general><scope>AAYXX</scope><scope>CITATION</scope><scope>OIOZB</scope><scope>OTOTI</scope></search><sort><creationdate>20210615</creationdate><title>Performance characterization of nanofiltration, reverse osmosis, and ion exchange technologies for acetic acid separation</title><author>Wu, Haoran ; Valentino, Lauren ; Riggio, Sean ; Holtzapple, Mark ; Urgun-Demirtas, Meltem</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c379t-81a017251dca7b7776abec21a01ea0407f268d5bf6edf778c82e24af9893715c3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2021</creationdate><topic>Acetate</topic><topic>Adsorption</topic><topic>Anion-exchange resin</topic><topic>INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY</topic><topic>Membrane</topic><topic>Separation</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Wu, Haoran</creatorcontrib><creatorcontrib>Valentino, Lauren</creatorcontrib><creatorcontrib>Riggio, Sean</creatorcontrib><creatorcontrib>Holtzapple, Mark</creatorcontrib><creatorcontrib>Urgun-Demirtas, Meltem</creatorcontrib><creatorcontrib>Argonne National Lab. (ANL), Argonne, IL (United States)</creatorcontrib><collection>CrossRef</collection><collection>OSTI.GOV - Hybrid</collection><collection>OSTI.GOV</collection><jtitle>Separation and purification technology</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Wu, Haoran</au><au>Valentino, Lauren</au><au>Riggio, Sean</au><au>Holtzapple, Mark</au><au>Urgun-Demirtas, Meltem</au><aucorp>Argonne National Lab. (ANL), Argonne, IL (United States)</aucorp><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Performance characterization of nanofiltration, reverse osmosis, and ion exchange technologies for acetic acid separation</atitle><jtitle>Separation and purification technology</jtitle><date>2021-06-15</date><risdate>2021</risdate><volume>265</volume><spage>118108</spage><pages>118108-</pages><artnum>118108</artnum><issn>1383-5866</issn><eissn>1873-3794</eissn><abstract>[Display omitted] •Five anion-exchange resins and five pressure-driven membranes were tested to recover acetic acid in aqueous solution.•Resin adsorption phenomena were evaluated with isotherm and kinetic models.•IRN-78 was determined to be the best-performing resin for acetic acid separation when solution pH was greater than pKa of acetic acid.•Solution diffusion model was successfully used to fit the experimental data for membrane separation.•Reverse osmosis membrane (BW30XFR) achieved the highest acetic acid rejection (98.6%). A major obstacle to widespread implementation of bio-based fuels and chemicals is the lack of efficient and cost-effective separation methods. To purify acetic acid produced by biochemical conversion of biomass via anaerobic digestion, this work employs two commonly used separation technologies: (1) ion-exchange (IX) resin and (2) pressure-driven membranes. This study tested five commercially available strong- and weak-base anion-exchange resins and five commercially available nanofiltration (NF) and reverse osmosis (RO) membranes. The pH of the feed solution significantly affected adsorption capacity. At pH 6.3, a strong-base IX resin (IRN-78) performed best (95.1% acetate removal). With strong-base IX resins, the Langmuir isotherm model fit well, whereas for weak-base IX resins, the Freundlich isotherm provided a better fit. A pseudo-second-order kinetic model fit well for both IRN-78 and IRA-67. Regarding membrane separation, RO (BW30XFR membrane) achieved the highest rejection (98.6% acetate rejection), whereas an NF membrane (NF*) achieved the best combination of permeate flux (105 L/(h·m2)) and rejection (83.1% acetate rejection). For membrane performance, the experimental data were fit using the solution diffusion model. Increased pH in the feed solution lowered permeate flux but increased acetic acid rejection. When the acetic acid concentration in the feed solution increased, both permeate flux and acetic acid rejection decreased for membrane NF*.</abstract><cop>United States</cop><pub>Elsevier B.V</pub><doi>10.1016/j.seppur.2020.118108</doi><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 1383-5866
ispartof Separation and purification technology, 2021-06, Vol.265, p.118108, Article 118108
issn 1383-5866
1873-3794
language eng
recordid cdi_osti_scitechconnect_1798306
source Elsevier ScienceDirect Journals
subjects Acetate
Adsorption
Anion-exchange resin
INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY
Membrane
Separation
title Performance characterization of nanofiltration, reverse osmosis, and ion exchange technologies for acetic acid separation
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-25T20%3A55%3A37IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-elsevier_osti_&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Performance%20characterization%20of%20nanofiltration,%20reverse%20osmosis,%20and%20ion%20exchange%20technologies%20for%20acetic%20acid%20separation&rft.jtitle=Separation%20and%20purification%20technology&rft.au=Wu,%20Haoran&rft.aucorp=Argonne%20National%20Lab.%20(ANL),%20Argonne,%20IL%20(United%20States)&rft.date=2021-06-15&rft.volume=265&rft.spage=118108&rft.pages=118108-&rft.artnum=118108&rft.issn=1383-5866&rft.eissn=1873-3794&rft_id=info:doi/10.1016/j.seppur.2020.118108&rft_dat=%3Celsevier_osti_%3ES1383586620325818%3C/elsevier_osti_%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_els_id=S1383586620325818&rfr_iscdi=true