Experimental investigation of butanol isomer combustion in Homogeneous Charge Compression Ignition (HCCI) engines
•Isobutanol and n-butanol have a higher HCCI reactivity than gasoline.•IMEPg is comparable for each fuel across all tested conditions.•n-Butanol presented the highest ringing intensity at higher equivalence ratios.•Gasoline exhibited the best combustion stability of all tested fuels.•Emissions from...
Gespeichert in:
Veröffentlicht in: | Applied energy 2016-03, Vol.165 (C), p.612-626 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 626 |
---|---|
container_issue | C |
container_start_page | 612 |
container_title | Applied energy |
container_volume | 165 |
creator | Mack, J. Hunter Schuler, Daniel Butt, Ryan H. Dibble, Robert W. |
description | •Isobutanol and n-butanol have a higher HCCI reactivity than gasoline.•IMEPg is comparable for each fuel across all tested conditions.•n-Butanol presented the highest ringing intensity at higher equivalence ratios.•Gasoline exhibited the best combustion stability of all tested fuels.•Emissions from n-butanol and isobutanol were similar across all tested conditions.
Longer chain alcohols, such as butanol, possess major physiochemical advantages over ethanol as bio-components for gasoline, including higher energy content, better engine compatibility, and less water solubility. In this study, two butanol isomers (n-butanol and isobutanol) are investigated as potential fuels for Homogeneous Charge Compression Ignition (HCCI) engines. Wide ranges of intake pressure and equivalence ratio are investigated and the results are presented in comparison to ethanol and gasoline as reference fuels. Under all tested conditions, the butanol isomers require lower intake temperatures for a fixed combustion phasing, indicating higher HCCI reactivity. Both isomers show single-stage ignition behavior at all test points and behave similarly in regard to the combustion stability. Engine operation using n-butanol is slightly more stable under all conditions and misfiring occurs slightly later under very lean and naturally aspirated conditions. Similar to gasoline, n-butanol shows a higher heat release rate (HRR) at the beginning of combustion. The intermediate temperature heat release (ITHR) lowers the coefficient of variation (CoV) of IMEPg (gross indicated mean effective pressure), especially at retarded combustion timing and lean mixtures. However, the knock resistance of n-butanol is lower compared to isobutanol and the other tested fuels. The exhaust emissions of the two butanol isomers are in the same range as the two reference fuels. Overall, the results indicate that butanol is suited for use as a fuel in HCCI engines, either in neat form or in blend with gasoline. |
doi_str_mv | 10.1016/j.apenergy.2015.12.105 |
format | Article |
fullrecord | <record><control><sourceid>proquest_osti_</sourceid><recordid>TN_cdi_osti_scitechconnect_1234186</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0306261915016785</els_id><sourcerecordid>1790940192</sourcerecordid><originalsourceid>FETCH-LOGICAL-c494t-e8659be39cb85acf1d4d1592f96af859e3b663ef818c5a98f4f7a04eb42dbfbe3</originalsourceid><addsrcrecordid>eNqFkUFv2zAMhYVhA5p1-wuFsVN7cCbKtiLdWhjdEqDALttZkGXKVRBLruQUzb-fnGznngSQ36Me-Qi5AboGCvz7fq0n9BiH05pRaNbAcr35QFYgNqyUAOIjWdGK8pJxkFfkc0p7SikDRlfk5fFtwuhG9LM-FM6_YprdoGcXfBFs0R1n7UNupDBiLEwYu2M6N50vtmEMQ_45HFPRPus4YNGGcYqY0kLsBu_O6O22bXd3BfrBeUxfyCerDwm__nuvyZ8fj7_bbfn06-eufXgqTS3ruUTBG9lhJU0nGm0s9HUPjWRWcm1FI7HqOK_QChCm0VLY2m40rbGrWd_ZLLwm3y5zQzasknEzmmcTvEczK2BVDYJn6PYCTTG8HPPuanTJ4OGgz2spEFQA2zAG76MbSWVNQbKM8gtqYkgpolVTPrGOJwVULZmpvfqfmVoyy35yvcnC-4sQ82FeHcbFN3qDvYuL7T6490b8BXjrpS0</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1790940192</pqid></control><display><type>article</type><title>Experimental investigation of butanol isomer combustion in Homogeneous Charge Compression Ignition (HCCI) engines</title><source>Access via ScienceDirect (Elsevier)</source><creator>Mack, J. Hunter ; Schuler, Daniel ; Butt, Ryan H. ; Dibble, Robert W.</creator><creatorcontrib>Mack, J. Hunter ; Schuler, Daniel ; Butt, Ryan H. ; Dibble, Robert W.</creatorcontrib><description>•Isobutanol and n-butanol have a higher HCCI reactivity than gasoline.•IMEPg is comparable for each fuel across all tested conditions.•n-Butanol presented the highest ringing intensity at higher equivalence ratios.•Gasoline exhibited the best combustion stability of all tested fuels.•Emissions from n-butanol and isobutanol were similar across all tested conditions.
Longer chain alcohols, such as butanol, possess major physiochemical advantages over ethanol as bio-components for gasoline, including higher energy content, better engine compatibility, and less water solubility. In this study, two butanol isomers (n-butanol and isobutanol) are investigated as potential fuels for Homogeneous Charge Compression Ignition (HCCI) engines. Wide ranges of intake pressure and equivalence ratio are investigated and the results are presented in comparison to ethanol and gasoline as reference fuels. Under all tested conditions, the butanol isomers require lower intake temperatures for a fixed combustion phasing, indicating higher HCCI reactivity. Both isomers show single-stage ignition behavior at all test points and behave similarly in regard to the combustion stability. Engine operation using n-butanol is slightly more stable under all conditions and misfiring occurs slightly later under very lean and naturally aspirated conditions. Similar to gasoline, n-butanol shows a higher heat release rate (HRR) at the beginning of combustion. The intermediate temperature heat release (ITHR) lowers the coefficient of variation (CoV) of IMEPg (gross indicated mean effective pressure), especially at retarded combustion timing and lean mixtures. However, the knock resistance of n-butanol is lower compared to isobutanol and the other tested fuels. The exhaust emissions of the two butanol isomers are in the same range as the two reference fuels. Overall, the results indicate that butanol is suited for use as a fuel in HCCI engines, either in neat form or in blend with gasoline.</description><identifier>ISSN: 0306-2619</identifier><identifier>EISSN: 1872-9118</identifier><identifier>DOI: 10.1016/j.apenergy.2015.12.105</identifier><language>eng</language><publisher>United Kingdom: Elsevier Ltd</publisher><subject>Biofuel ; Butanol ; Charge ; Combustion ; Engines ; Experiments ; Fuels ; Gasoline ; Homogeneous charge compression ignition ; Ignition ; Internal combustion ; Isomers</subject><ispartof>Applied energy, 2016-03, Vol.165 (C), p.612-626</ispartof><rights>2016 The Authors</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c494t-e8659be39cb85acf1d4d1592f96af859e3b663ef818c5a98f4f7a04eb42dbfbe3</citedby><cites>FETCH-LOGICAL-c494t-e8659be39cb85acf1d4d1592f96af859e3b663ef818c5a98f4f7a04eb42dbfbe3</cites><orcidid>0000-0003-3294-1510 ; 0000000332941510</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.apenergy.2015.12.105$$EHTML$$P50$$Gelsevier$$Hfree_for_read</linktohtml><link.rule.ids>230,314,780,784,885,3550,27924,27925,45995</link.rule.ids><backlink>$$Uhttps://www.osti.gov/biblio/1234186$$D View this record in Osti.gov$$Hfree_for_read</backlink></links><search><creatorcontrib>Mack, J. Hunter</creatorcontrib><creatorcontrib>Schuler, Daniel</creatorcontrib><creatorcontrib>Butt, Ryan H.</creatorcontrib><creatorcontrib>Dibble, Robert W.</creatorcontrib><title>Experimental investigation of butanol isomer combustion in Homogeneous Charge Compression Ignition (HCCI) engines</title><title>Applied energy</title><description>•Isobutanol and n-butanol have a higher HCCI reactivity than gasoline.•IMEPg is comparable for each fuel across all tested conditions.•n-Butanol presented the highest ringing intensity at higher equivalence ratios.•Gasoline exhibited the best combustion stability of all tested fuels.•Emissions from n-butanol and isobutanol were similar across all tested conditions.
Longer chain alcohols, such as butanol, possess major physiochemical advantages over ethanol as bio-components for gasoline, including higher energy content, better engine compatibility, and less water solubility. In this study, two butanol isomers (n-butanol and isobutanol) are investigated as potential fuels for Homogeneous Charge Compression Ignition (HCCI) engines. Wide ranges of intake pressure and equivalence ratio are investigated and the results are presented in comparison to ethanol and gasoline as reference fuels. Under all tested conditions, the butanol isomers require lower intake temperatures for a fixed combustion phasing, indicating higher HCCI reactivity. Both isomers show single-stage ignition behavior at all test points and behave similarly in regard to the combustion stability. Engine operation using n-butanol is slightly more stable under all conditions and misfiring occurs slightly later under very lean and naturally aspirated conditions. Similar to gasoline, n-butanol shows a higher heat release rate (HRR) at the beginning of combustion. The intermediate temperature heat release (ITHR) lowers the coefficient of variation (CoV) of IMEPg (gross indicated mean effective pressure), especially at retarded combustion timing and lean mixtures. However, the knock resistance of n-butanol is lower compared to isobutanol and the other tested fuels. The exhaust emissions of the two butanol isomers are in the same range as the two reference fuels. Overall, the results indicate that butanol is suited for use as a fuel in HCCI engines, either in neat form or in blend with gasoline.</description><subject>Biofuel</subject><subject>Butanol</subject><subject>Charge</subject><subject>Combustion</subject><subject>Engines</subject><subject>Experiments</subject><subject>Fuels</subject><subject>Gasoline</subject><subject>Homogeneous charge compression ignition</subject><subject>Ignition</subject><subject>Internal combustion</subject><subject>Isomers</subject><issn>0306-2619</issn><issn>1872-9118</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2016</creationdate><recordtype>article</recordtype><recordid>eNqFkUFv2zAMhYVhA5p1-wuFsVN7cCbKtiLdWhjdEqDALttZkGXKVRBLruQUzb-fnGznngSQ36Me-Qi5AboGCvz7fq0n9BiH05pRaNbAcr35QFYgNqyUAOIjWdGK8pJxkFfkc0p7SikDRlfk5fFtwuhG9LM-FM6_YprdoGcXfBFs0R1n7UNupDBiLEwYu2M6N50vtmEMQ_45HFPRPus4YNGGcYqY0kLsBu_O6O22bXd3BfrBeUxfyCerDwm__nuvyZ8fj7_bbfn06-eufXgqTS3ruUTBG9lhJU0nGm0s9HUPjWRWcm1FI7HqOK_QChCm0VLY2m40rbGrWd_ZLLwm3y5zQzasknEzmmcTvEczK2BVDYJn6PYCTTG8HPPuanTJ4OGgz2spEFQA2zAG76MbSWVNQbKM8gtqYkgpolVTPrGOJwVULZmpvfqfmVoyy35yvcnC-4sQ82FeHcbFN3qDvYuL7T6490b8BXjrpS0</recordid><startdate>20160301</startdate><enddate>20160301</enddate><creator>Mack, J. Hunter</creator><creator>Schuler, Daniel</creator><creator>Butt, Ryan H.</creator><creator>Dibble, Robert W.</creator><general>Elsevier Ltd</general><general>Elsevier</general><scope>6I.</scope><scope>AAFTH</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7ST</scope><scope>C1K</scope><scope>SOI</scope><scope>7TA</scope><scope>8FD</scope><scope>F28</scope><scope>FR3</scope><scope>JG9</scope><scope>OTOTI</scope><orcidid>https://orcid.org/0000-0003-3294-1510</orcidid><orcidid>https://orcid.org/0000000332941510</orcidid></search><sort><creationdate>20160301</creationdate><title>Experimental investigation of butanol isomer combustion in Homogeneous Charge Compression Ignition (HCCI) engines</title><author>Mack, J. Hunter ; Schuler, Daniel ; Butt, Ryan H. ; Dibble, Robert W.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c494t-e8659be39cb85acf1d4d1592f96af859e3b663ef818c5a98f4f7a04eb42dbfbe3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2016</creationdate><topic>Biofuel</topic><topic>Butanol</topic><topic>Charge</topic><topic>Combustion</topic><topic>Engines</topic><topic>Experiments</topic><topic>Fuels</topic><topic>Gasoline</topic><topic>Homogeneous charge compression ignition</topic><topic>Ignition</topic><topic>Internal combustion</topic><topic>Isomers</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Mack, J. Hunter</creatorcontrib><creatorcontrib>Schuler, Daniel</creatorcontrib><creatorcontrib>Butt, Ryan H.</creatorcontrib><creatorcontrib>Dibble, Robert W.</creatorcontrib><collection>ScienceDirect Open Access Titles</collection><collection>Elsevier:ScienceDirect:Open Access</collection><collection>CrossRef</collection><collection>Environment Abstracts</collection><collection>Environmental Sciences and Pollution Management</collection><collection>Environment Abstracts</collection><collection>Materials Business File</collection><collection>Technology Research Database</collection><collection>ANTE: Abstracts in New Technology & Engineering</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>OSTI.GOV</collection><jtitle>Applied energy</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Mack, J. Hunter</au><au>Schuler, Daniel</au><au>Butt, Ryan H.</au><au>Dibble, Robert W.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Experimental investigation of butanol isomer combustion in Homogeneous Charge Compression Ignition (HCCI) engines</atitle><jtitle>Applied energy</jtitle><date>2016-03-01</date><risdate>2016</risdate><volume>165</volume><issue>C</issue><spage>612</spage><epage>626</epage><pages>612-626</pages><issn>0306-2619</issn><eissn>1872-9118</eissn><abstract>•Isobutanol and n-butanol have a higher HCCI reactivity than gasoline.•IMEPg is comparable for each fuel across all tested conditions.•n-Butanol presented the highest ringing intensity at higher equivalence ratios.•Gasoline exhibited the best combustion stability of all tested fuels.•Emissions from n-butanol and isobutanol were similar across all tested conditions.
Longer chain alcohols, such as butanol, possess major physiochemical advantages over ethanol as bio-components for gasoline, including higher energy content, better engine compatibility, and less water solubility. In this study, two butanol isomers (n-butanol and isobutanol) are investigated as potential fuels for Homogeneous Charge Compression Ignition (HCCI) engines. Wide ranges of intake pressure and equivalence ratio are investigated and the results are presented in comparison to ethanol and gasoline as reference fuels. Under all tested conditions, the butanol isomers require lower intake temperatures for a fixed combustion phasing, indicating higher HCCI reactivity. Both isomers show single-stage ignition behavior at all test points and behave similarly in regard to the combustion stability. Engine operation using n-butanol is slightly more stable under all conditions and misfiring occurs slightly later under very lean and naturally aspirated conditions. Similar to gasoline, n-butanol shows a higher heat release rate (HRR) at the beginning of combustion. The intermediate temperature heat release (ITHR) lowers the coefficient of variation (CoV) of IMEPg (gross indicated mean effective pressure), especially at retarded combustion timing and lean mixtures. However, the knock resistance of n-butanol is lower compared to isobutanol and the other tested fuels. The exhaust emissions of the two butanol isomers are in the same range as the two reference fuels. Overall, the results indicate that butanol is suited for use as a fuel in HCCI engines, either in neat form or in blend with gasoline.</abstract><cop>United Kingdom</cop><pub>Elsevier Ltd</pub><doi>10.1016/j.apenergy.2015.12.105</doi><tpages>15</tpages><orcidid>https://orcid.org/0000-0003-3294-1510</orcidid><orcidid>https://orcid.org/0000000332941510</orcidid><oa>free_for_read</oa></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0306-2619 |
ispartof | Applied energy, 2016-03, Vol.165 (C), p.612-626 |
issn | 0306-2619 1872-9118 |
language | eng |
recordid | cdi_osti_scitechconnect_1234186 |
source | Access via ScienceDirect (Elsevier) |
subjects | Biofuel Butanol Charge Combustion Engines Experiments Fuels Gasoline Homogeneous charge compression ignition Ignition Internal combustion Isomers |
title | Experimental investigation of butanol isomer combustion in Homogeneous Charge Compression Ignition (HCCI) engines |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-22T07%3A37%3A54IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_osti_&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Experimental%20investigation%20of%20butanol%20isomer%20combustion%20in%20Homogeneous%20Charge%20Compression%20Ignition%20(HCCI)%20engines&rft.jtitle=Applied%20energy&rft.au=Mack,%20J.%20Hunter&rft.date=2016-03-01&rft.volume=165&rft.issue=C&rft.spage=612&rft.epage=626&rft.pages=612-626&rft.issn=0306-2619&rft.eissn=1872-9118&rft_id=info:doi/10.1016/j.apenergy.2015.12.105&rft_dat=%3Cproquest_osti_%3E1790940192%3C/proquest_osti_%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1790940192&rft_id=info:pmid/&rft_els_id=S0306261915016785&rfr_iscdi=true |