Microwave Dielectric Sensing of Free-Flowing, Single, Living Cells in Aqueous Suspension

Dielectric measurements offer the possibility of highly sensitive detection of physical cell properties, and are of interest for clinical applications due to their non-destructive nature and the lack of need for cell labelling. Here we report sensitive measurements on single, living, free-flowing ce...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE journal of electromagnetics, RF and microwaves in medicine and biology RF and microwaves in medicine and biology, 2020-06, Vol.4 (2), p.97-108
Hauptverfasser: Watts, Clare, Hanham, Stephen M., Armstrong, James P. K., Ahmad, Munir M., Stevens, Molly M., Klein, Norbert
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Dielectric measurements offer the possibility of highly sensitive detection of physical cell properties, and are of interest for clinical applications due to their non-destructive nature and the lack of need for cell labelling. Here we report sensitive measurements on single, living, free-flowing cells (not electrostatically or dielectrophoretically trapped, cultured or fixed directly on sensing elements) in aqueous medium at ∼9.8 GHz taken using a coupled dielectric-split ring resonator assembly. Inductive coupling between the two resonators enabled separation of microfluidic chips from RF connectors and allowed for time-resolved continuous-wave measurements on flowing single cells via the coaxial ports of a dielectric-loaded microwave cavity. Analysis via an equivalent circuit model showed that the novel resonator assembly maintained the permittivity-dependent sensitivity of a split ring resonator while operating at quality factors >1000 with lossy aqueous media (typically ∼1900). Using a microfluidic channel with a 300 × 300 μm cross section, at a water-loaded resonant amplitude of ∼−22 dB at 0 dBm input power level, shifts in amplitude due to individual cells passing through the sensing region of up to −0.0015 dB were observed. Correlations between averaged amplitude shifts and cell size as well as material properties demonstrate the diagnostic potential of this technique.
ISSN:2469-7249
2469-7257
DOI:10.1109/JERM.2019.2932569