Laser to single-mode fiber assembly using an electroforming technique
One of the most difficult problems in coupling laser diodes to single-mode fibers is maintaining alignment while the two components are locked into place. The authors report a novel approach to the lockup process that uses electroforming. This technique solves the isolation and train relief problem...
Gespeichert in:
| Veröffentlicht in: | IEEE photonics technology letters 1991-08, Vol.3 (8), p.749-751 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 751 |
|---|---|
| container_issue | 8 |
| container_start_page | 749 |
| container_title | IEEE photonics technology letters |
| container_volume | 3 |
| creator | Ladany, I. Hartman, D.H. Lalk, G.R. Young, K.C. |
| description | One of the most difficult problems in coupling laser diodes to single-mode fibers is maintaining alignment while the two components are locked into place. The authors report a novel approach to the lockup process that uses electroforming. This technique solves the isolation and train relief problem by locking the laser and fiber into a single structure rather than by mounting both to a common base. With this novel technique and simple butt coupling, coupling efficiencies as high as 14% have been achieved with very little alignment shift during lockup. The completed structure is at least 100 times smaller in volume than conventional packages and provides strain relief and isolation from mechanical disturbances.< > |
| doi_str_mv | 10.1109/68.84474 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_RIE</sourceid><recordid>TN_cdi_ieee_primary_84474</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>84474</ieee_id><sourcerecordid>28337458</sourcerecordid><originalsourceid>FETCH-LOGICAL-c274t-773b06c0997baad1dbb12e128b535f02f2b77b586901182d59d0e8ec89234dd23</originalsourceid><addsrcrecordid>eNo9kEtLAzEUhYMoWKvg1t2sxM3U3DwmyVJKfUDBja5DHnd0ZB41mS7675064uoezvk4Fw4h10BXANTcV3qlhVDihCzACCgpKHE6aTppAC7PyUXOX5SCkFwsyGbrMqZiHIrc9B8tlt0QsagbP5kuZ-x8eyj2x6xwfYEthjEN9ZC6ozNi-Oyb7z1ekrPatRmv_u6SvD9u3tbP5fb16WX9sC0DU2IsleKeVoEao7xzEaL3wBCY9pLLmrKaeaW81JWhAJpFaSJFjUEbxkWMjC_J7dy7S8P0No-2a3LAtnU9DvtsmeZcCakn8G4GQxpyTljbXWo6lw4WqD3uZCttf3ea0JsZbRDxH5uzHwqjYgA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>28337458</pqid></control><display><type>article</type><title>Laser to single-mode fiber assembly using an electroforming technique</title><source>IEEE Electronic Library (IEL)</source><creator>Ladany, I. ; Hartman, D.H. ; Lalk, G.R. ; Young, K.C.</creator><creatorcontrib>Ladany, I. ; Hartman, D.H. ; Lalk, G.R. ; Young, K.C.</creatorcontrib><description>One of the most difficult problems in coupling laser diodes to single-mode fibers is maintaining alignment while the two components are locked into place. The authors report a novel approach to the lockup process that uses electroforming. This technique solves the isolation and train relief problem by locking the laser and fiber into a single structure rather than by mounting both to a common base. With this novel technique and simple butt coupling, coupling efficiencies as high as 14% have been achieved with very little alignment shift during lockup. The completed structure is at least 100 times smaller in volume than conventional packages and provides strain relief and isolation from mechanical disturbances.< ></description><identifier>ISSN: 1041-1135</identifier><identifier>EISSN: 1941-0174</identifier><identifier>DOI: 10.1109/68.84474</identifier><identifier>CODEN: IPTLEL</identifier><language>eng</language><publisher>IEEE</publisher><subject>Assembly ; Capacitive sensors ; Copper ; Diode lasers ; Fiber lasers ; Laser theory ; Optical coupling ; Optical fiber couplers ; Optical fibers ; Optical sensors</subject><ispartof>IEEE photonics technology letters, 1991-08, Vol.3 (8), p.749-751</ispartof><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c274t-773b06c0997baad1dbb12e128b535f02f2b77b586901182d59d0e8ec89234dd23</citedby><cites>FETCH-LOGICAL-c274t-773b06c0997baad1dbb12e128b535f02f2b77b586901182d59d0e8ec89234dd23</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/84474$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>315,781,785,797,27928,27929,54762</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/84474$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc></links><search><creatorcontrib>Ladany, I.</creatorcontrib><creatorcontrib>Hartman, D.H.</creatorcontrib><creatorcontrib>Lalk, G.R.</creatorcontrib><creatorcontrib>Young, K.C.</creatorcontrib><title>Laser to single-mode fiber assembly using an electroforming technique</title><title>IEEE photonics technology letters</title><addtitle>LPT</addtitle><description>One of the most difficult problems in coupling laser diodes to single-mode fibers is maintaining alignment while the two components are locked into place. The authors report a novel approach to the lockup process that uses electroforming. This technique solves the isolation and train relief problem by locking the laser and fiber into a single structure rather than by mounting both to a common base. With this novel technique and simple butt coupling, coupling efficiencies as high as 14% have been achieved with very little alignment shift during lockup. The completed structure is at least 100 times smaller in volume than conventional packages and provides strain relief and isolation from mechanical disturbances.< ></description><subject>Assembly</subject><subject>Capacitive sensors</subject><subject>Copper</subject><subject>Diode lasers</subject><subject>Fiber lasers</subject><subject>Laser theory</subject><subject>Optical coupling</subject><subject>Optical fiber couplers</subject><subject>Optical fibers</subject><subject>Optical sensors</subject><issn>1041-1135</issn><issn>1941-0174</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1991</creationdate><recordtype>article</recordtype><recordid>eNo9kEtLAzEUhYMoWKvg1t2sxM3U3DwmyVJKfUDBja5DHnd0ZB41mS7675064uoezvk4Fw4h10BXANTcV3qlhVDihCzACCgpKHE6aTppAC7PyUXOX5SCkFwsyGbrMqZiHIrc9B8tlt0QsagbP5kuZ-x8eyj2x6xwfYEthjEN9ZC6ozNi-Oyb7z1ekrPatRmv_u6SvD9u3tbP5fb16WX9sC0DU2IsleKeVoEao7xzEaL3wBCY9pLLmrKaeaW81JWhAJpFaSJFjUEbxkWMjC_J7dy7S8P0No-2a3LAtnU9DvtsmeZcCakn8G4GQxpyTljbXWo6lw4WqD3uZCttf3ea0JsZbRDxH5uzHwqjYgA</recordid><startdate>19910801</startdate><enddate>19910801</enddate><creator>Ladany, I.</creator><creator>Hartman, D.H.</creator><creator>Lalk, G.R.</creator><creator>Young, K.C.</creator><general>IEEE</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SP</scope><scope>8FD</scope><scope>L7M</scope></search><sort><creationdate>19910801</creationdate><title>Laser to single-mode fiber assembly using an electroforming technique</title><author>Ladany, I. ; Hartman, D.H. ; Lalk, G.R. ; Young, K.C.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c274t-773b06c0997baad1dbb12e128b535f02f2b77b586901182d59d0e8ec89234dd23</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1991</creationdate><topic>Assembly</topic><topic>Capacitive sensors</topic><topic>Copper</topic><topic>Diode lasers</topic><topic>Fiber lasers</topic><topic>Laser theory</topic><topic>Optical coupling</topic><topic>Optical fiber couplers</topic><topic>Optical fibers</topic><topic>Optical sensors</topic><toplevel>online_resources</toplevel><creatorcontrib>Ladany, I.</creatorcontrib><creatorcontrib>Hartman, D.H.</creatorcontrib><creatorcontrib>Lalk, G.R.</creatorcontrib><creatorcontrib>Young, K.C.</creatorcontrib><collection>CrossRef</collection><collection>Electronics & Communications Abstracts</collection><collection>Technology Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>IEEE photonics technology letters</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Ladany, I.</au><au>Hartman, D.H.</au><au>Lalk, G.R.</au><au>Young, K.C.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Laser to single-mode fiber assembly using an electroforming technique</atitle><jtitle>IEEE photonics technology letters</jtitle><stitle>LPT</stitle><date>1991-08-01</date><risdate>1991</risdate><volume>3</volume><issue>8</issue><spage>749</spage><epage>751</epage><pages>749-751</pages><issn>1041-1135</issn><eissn>1941-0174</eissn><coden>IPTLEL</coden><abstract>One of the most difficult problems in coupling laser diodes to single-mode fibers is maintaining alignment while the two components are locked into place. The authors report a novel approach to the lockup process that uses electroforming. This technique solves the isolation and train relief problem by locking the laser and fiber into a single structure rather than by mounting both to a common base. With this novel technique and simple butt coupling, coupling efficiencies as high as 14% have been achieved with very little alignment shift during lockup. The completed structure is at least 100 times smaller in volume than conventional packages and provides strain relief and isolation from mechanical disturbances.< ></abstract><pub>IEEE</pub><doi>10.1109/68.84474</doi><tpages>3</tpages></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | ISSN: 1041-1135 |
| ispartof | IEEE photonics technology letters, 1991-08, Vol.3 (8), p.749-751 |
| issn | 1041-1135 1941-0174 |
| language | eng |
| recordid | cdi_ieee_primary_84474 |
| source | IEEE Electronic Library (IEL) |
| subjects | Assembly Capacitive sensors Copper Diode lasers Fiber lasers Laser theory Optical coupling Optical fiber couplers Optical fibers Optical sensors |
| title | Laser to single-mode fiber assembly using an electroforming technique |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-17T06%3A36%3A51IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_RIE&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Laser%20to%20single-mode%20fiber%20assembly%20using%20an%20electroforming%20technique&rft.jtitle=IEEE%20photonics%20technology%20letters&rft.au=Ladany,%20I.&rft.date=1991-08-01&rft.volume=3&rft.issue=8&rft.spage=749&rft.epage=751&rft.pages=749-751&rft.issn=1041-1135&rft.eissn=1941-0174&rft.coden=IPTLEL&rft_id=info:doi/10.1109/68.84474&rft_dat=%3Cproquest_RIE%3E28337458%3C/proquest_RIE%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=28337458&rft_id=info:pmid/&rft_ieee_id=84474&rfr_iscdi=true |