Investigation on 3-D-Printing Technologies for Millimeter- Wave and Terahertz Applications
Three-dimensional-printing technologies have been receiving great attention for a wide variety of applications in recent years for cost effectiveness, eco-friendliness, and process simplicity in complicated structures. This paper describes the challenges and solutions of applying 3-D-printing techno...
Gespeichert in:
| Veröffentlicht in: | Proceedings of the IEEE 2017-04, Vol.105 (4), p.723-736 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 736 |
|---|---|
| container_issue | 4 |
| container_start_page | 723 |
| container_title | Proceedings of the IEEE |
| container_volume | 105 |
| creator | Zhang, Bing Guo, Yong-Xin Zirath, Herbert Zhang, Yue Ping |
| description | Three-dimensional-printing technologies have been receiving great attention for a wide variety of applications in recent years for cost effectiveness, eco-friendliness, and process simplicity in complicated structures. This paper describes the challenges and solutions of applying 3-D-printing technologies in fabricating passive millimeter-wave (mmWave) and terahertz (THz) devices. First, we review the state-of-the-art dielectric 3-D-printed passive mmWave and THz devices. Then, we focus on our novel 3-D-printed metallic passive mmWave and THz devices such as horn antennas and waveguides. Next, we analyze the dimensional tolerance and surface roughness of various 3-D-printing technologies in order to provide a guide for choosing an appropriate technology for specific applications. Finally, we summarize the current work and identify the future studies in material powder refinement, surface treatment, optimization of the print process, development of hybrid dielectric and metallic 3-D-printing technology for realizing not only simple mmWave and THz devices but also sophisticated mmWave and THz systems. |
| doi_str_mv | 10.1109/JPROC.2016.2639520 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_RIE</sourceid><recordid>TN_cdi_ieee_primary_7867792</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>7867792</ieee_id><sourcerecordid>1880192684</sourcerecordid><originalsourceid>FETCH-LOGICAL-c301t-6da74fbb3b5b4799fe1bcb105cdf9b3b0e62d9d8022d9b21432ae644820d03</originalsourceid><addsrcrecordid>eNo9kVtr3DAQhUVpodu0f6B9MfTZ2xndLD2G7S0lJSENFPoiZHm8q-C1Xcmb0vz6KNkQGBgYzvmGmcPYe4Q1IthPPy6vLjZrDqjXXAurOLxgK1TK1Jwr_ZKtANDUlqN9zd7kfAMAQmmxYn_OxlvKS9z6JU5jVUrUn-vLFMcljtvqmsJunIZpGylX_ZSqn3EY4p4WSnX1299S5ceuqJLfUVruqtN5HmJ4ZOW37FXvh0zvnvoJu_r65XrzvT6_-Ha2OT2vgwBcat35RvZtK1rVysbanrANLYIKXW_LFEjzznYGeGktRym4Jy2l4dCBOGG_jtD8j-ZD6-YU9z79d5OPLlEmn8LOhZ0f9pSyy-QITSd7RIctcSe9Es6Als6qIEERysBNoX48Uuc0_T2U_7ib6ZDGcoVDYwAt10YWFT-qQppyTtQ_b0dwD7G4x1jcQyzuKZZi-nA0RSJ6NjRGN43l4h612YlU</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1880192684</pqid></control><display><type>article</type><title>Investigation on 3-D-Printing Technologies for Millimeter- Wave and Terahertz Applications</title><source>IEEE Electronic Library (IEL)</source><creator>Zhang, Bing ; Guo, Yong-Xin ; Zirath, Herbert ; Zhang, Yue Ping</creator><creatorcontrib>Zhang, Bing ; Guo, Yong-Xin ; Zirath, Herbert ; Zhang, Yue Ping</creatorcontrib><description>Three-dimensional-printing technologies have been receiving great attention for a wide variety of applications in recent years for cost effectiveness, eco-friendliness, and process simplicity in complicated structures. This paper describes the challenges and solutions of applying 3-D-printing technologies in fabricating passive millimeter-wave (mmWave) and terahertz (THz) devices. First, we review the state-of-the-art dielectric 3-D-printed passive mmWave and THz devices. Then, we focus on our novel 3-D-printed metallic passive mmWave and THz devices such as horn antennas and waveguides. Next, we analyze the dimensional tolerance and surface roughness of various 3-D-printing technologies in order to provide a guide for choosing an appropriate technology for specific applications. Finally, we summarize the current work and identify the future studies in material powder refinement, surface treatment, optimization of the print process, development of hybrid dielectric and metallic 3-D-printing technology for realizing not only simple mmWave and THz devices but also sophisticated mmWave and THz systems.</description><identifier>ISSN: 0018-9219</identifier><identifier>ISSN: 1558-2256</identifier><identifier>EISSN: 1558-2256</identifier><identifier>DOI: 10.1109/JPROC.2016.2639520</identifier><identifier>CODEN: IEEPAD</identifier><language>eng</language><publisher>New York: IEEE</publisher><subject>3-D printing ; Antennas ; Band ; Ceramic Stereolithography ; Dielectrics ; Filters ; Guides ; Integration ; Metals ; Metamaterials ; Millimeter wave (mmWave) ; Periodic structures ; Polymers ; terahertz (THz) ; Terahertz frequencies ; Three-dimensional printing</subject><ispartof>Proceedings of the IEEE, 2017-04, Vol.105 (4), p.723-736</ispartof><rights>Copyright The Institute of Electrical and Electronics Engineers, Inc. (IEEE) 2017</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c301t-6da74fbb3b5b4799fe1bcb105cdf9b3b0e62d9d8022d9b21432ae644820d03</citedby><cites>FETCH-LOGICAL-c301t-6da74fbb3b5b4799fe1bcb105cdf9b3b0e62d9d8022d9b21432ae644820d03</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/7867792$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>230,314,776,780,792,881,27901,27902,54733</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/7867792$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc><backlink>$$Uhttps://research.chalmers.se/publication/249336$$DView record from Swedish Publication Index$$Hfree_for_read</backlink></links><search><creatorcontrib>Zhang, Bing</creatorcontrib><creatorcontrib>Guo, Yong-Xin</creatorcontrib><creatorcontrib>Zirath, Herbert</creatorcontrib><creatorcontrib>Zhang, Yue Ping</creatorcontrib><title>Investigation on 3-D-Printing Technologies for Millimeter- Wave and Terahertz Applications</title><title>Proceedings of the IEEE</title><addtitle>JPROC</addtitle><description>Three-dimensional-printing technologies have been receiving great attention for a wide variety of applications in recent years for cost effectiveness, eco-friendliness, and process simplicity in complicated structures. This paper describes the challenges and solutions of applying 3-D-printing technologies in fabricating passive millimeter-wave (mmWave) and terahertz (THz) devices. First, we review the state-of-the-art dielectric 3-D-printed passive mmWave and THz devices. Then, we focus on our novel 3-D-printed metallic passive mmWave and THz devices such as horn antennas and waveguides. Next, we analyze the dimensional tolerance and surface roughness of various 3-D-printing technologies in order to provide a guide for choosing an appropriate technology for specific applications. Finally, we summarize the current work and identify the future studies in material powder refinement, surface treatment, optimization of the print process, development of hybrid dielectric and metallic 3-D-printing technology for realizing not only simple mmWave and THz devices but also sophisticated mmWave and THz systems.</description><subject>3-D printing</subject><subject>Antennas</subject><subject>Band</subject><subject>Ceramic Stereolithography</subject><subject>Dielectrics</subject><subject>Filters</subject><subject>Guides</subject><subject>Integration</subject><subject>Metals</subject><subject>Metamaterials</subject><subject>Millimeter wave (mmWave)</subject><subject>Periodic structures</subject><subject>Polymers</subject><subject>terahertz (THz)</subject><subject>Terahertz frequencies</subject><subject>Three-dimensional printing</subject><issn>0018-9219</issn><issn>1558-2256</issn><issn>1558-2256</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2017</creationdate><recordtype>article</recordtype><sourceid>RIE</sourceid><recordid>eNo9kVtr3DAQhUVpodu0f6B9MfTZ2xndLD2G7S0lJSENFPoiZHm8q-C1Xcmb0vz6KNkQGBgYzvmGmcPYe4Q1IthPPy6vLjZrDqjXXAurOLxgK1TK1Jwr_ZKtANDUlqN9zd7kfAMAQmmxYn_OxlvKS9z6JU5jVUrUn-vLFMcljtvqmsJunIZpGylX_ZSqn3EY4p4WSnX1299S5ceuqJLfUVruqtN5HmJ4ZOW37FXvh0zvnvoJu_r65XrzvT6_-Ha2OT2vgwBcat35RvZtK1rVysbanrANLYIKXW_LFEjzznYGeGktRym4Jy2l4dCBOGG_jtD8j-ZD6-YU9z79d5OPLlEmn8LOhZ0f9pSyy-QITSd7RIctcSe9Es6Als6qIEERysBNoX48Uuc0_T2U_7ib6ZDGcoVDYwAt10YWFT-qQppyTtQ_b0dwD7G4x1jcQyzuKZZi-nA0RSJ6NjRGN43l4h612YlU</recordid><startdate>20170401</startdate><enddate>20170401</enddate><creator>Zhang, Bing</creator><creator>Guo, Yong-Xin</creator><creator>Zirath, Herbert</creator><creator>Zhang, Yue Ping</creator><general>IEEE</general><general>The Institute of Electrical and Electronics Engineers, Inc. (IEEE)</general><scope>97E</scope><scope>RIA</scope><scope>RIE</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SP</scope><scope>8FD</scope><scope>L7M</scope><scope>ADTPV</scope><scope>AOWAS</scope><scope>F1S</scope></search><sort><creationdate>20170401</creationdate><title>Investigation on 3-D-Printing Technologies for Millimeter- Wave and Terahertz Applications</title><author>Zhang, Bing ; Guo, Yong-Xin ; Zirath, Herbert ; Zhang, Yue Ping</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c301t-6da74fbb3b5b4799fe1bcb105cdf9b3b0e62d9d8022d9b21432ae644820d03</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2017</creationdate><topic>3-D printing</topic><topic>Antennas</topic><topic>Band</topic><topic>Ceramic Stereolithography</topic><topic>Dielectrics</topic><topic>Filters</topic><topic>Guides</topic><topic>Integration</topic><topic>Metals</topic><topic>Metamaterials</topic><topic>Millimeter wave (mmWave)</topic><topic>Periodic structures</topic><topic>Polymers</topic><topic>terahertz (THz)</topic><topic>Terahertz frequencies</topic><topic>Three-dimensional printing</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Zhang, Bing</creatorcontrib><creatorcontrib>Guo, Yong-Xin</creatorcontrib><creatorcontrib>Zirath, Herbert</creatorcontrib><creatorcontrib>Zhang, Yue Ping</creatorcontrib><collection>IEEE All-Society Periodicals Package (ASPP) 2005-present</collection><collection>IEEE All-Society Periodicals Package (ASPP) 1998-Present</collection><collection>IEEE Electronic Library (IEL)</collection><collection>CrossRef</collection><collection>Electronics & Communications Abstracts</collection><collection>Technology Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><collection>SwePub</collection><collection>SwePub Articles</collection><collection>SWEPUB Chalmers tekniska högskola</collection><jtitle>Proceedings of the IEEE</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Zhang, Bing</au><au>Guo, Yong-Xin</au><au>Zirath, Herbert</au><au>Zhang, Yue Ping</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Investigation on 3-D-Printing Technologies for Millimeter- Wave and Terahertz Applications</atitle><jtitle>Proceedings of the IEEE</jtitle><stitle>JPROC</stitle><date>2017-04-01</date><risdate>2017</risdate><volume>105</volume><issue>4</issue><spage>723</spage><epage>736</epage><pages>723-736</pages><issn>0018-9219</issn><issn>1558-2256</issn><eissn>1558-2256</eissn><coden>IEEPAD</coden><abstract>Three-dimensional-printing technologies have been receiving great attention for a wide variety of applications in recent years for cost effectiveness, eco-friendliness, and process simplicity in complicated structures. This paper describes the challenges and solutions of applying 3-D-printing technologies in fabricating passive millimeter-wave (mmWave) and terahertz (THz) devices. First, we review the state-of-the-art dielectric 3-D-printed passive mmWave and THz devices. Then, we focus on our novel 3-D-printed metallic passive mmWave and THz devices such as horn antennas and waveguides. Next, we analyze the dimensional tolerance and surface roughness of various 3-D-printing technologies in order to provide a guide for choosing an appropriate technology for specific applications. Finally, we summarize the current work and identify the future studies in material powder refinement, surface treatment, optimization of the print process, development of hybrid dielectric and metallic 3-D-printing technology for realizing not only simple mmWave and THz devices but also sophisticated mmWave and THz systems.</abstract><cop>New York</cop><pub>IEEE</pub><doi>10.1109/JPROC.2016.2639520</doi><tpages>14</tpages></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | ISSN: 0018-9219 |
| ispartof | Proceedings of the IEEE, 2017-04, Vol.105 (4), p.723-736 |
| issn | 0018-9219 1558-2256 1558-2256 |
| language | eng |
| recordid | cdi_ieee_primary_7867792 |
| source | IEEE Electronic Library (IEL) |
| subjects | 3-D printing Antennas Band Ceramic Stereolithography Dielectrics Filters Guides Integration Metals Metamaterials Millimeter wave (mmWave) Periodic structures Polymers terahertz (THz) Terahertz frequencies Three-dimensional printing |
| title | Investigation on 3-D-Printing Technologies for Millimeter- Wave and Terahertz Applications |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-09T15%3A30%3A11IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_RIE&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Investigation%20on%203-D-Printing%20Technologies%20for%20Millimeter-%20Wave%20and%20Terahertz%20Applications&rft.jtitle=Proceedings%20of%20the%20IEEE&rft.au=Zhang,%20Bing&rft.date=2017-04-01&rft.volume=105&rft.issue=4&rft.spage=723&rft.epage=736&rft.pages=723-736&rft.issn=0018-9219&rft.eissn=1558-2256&rft.coden=IEEPAD&rft_id=info:doi/10.1109/JPROC.2016.2639520&rft_dat=%3Cproquest_RIE%3E1880192684%3C/proquest_RIE%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=1880192684&rft_id=info:pmid/&rft_ieee_id=7867792&rfr_iscdi=true |