The design of data mutual conversion system between serial port and ethernet based on W5100
Because of low transmission speed and difficult networking of serial ports, a data mutual conversion system between serial port and Ethernet based on W5100 and MCV C8051F120 is proposed. RS232 and RS422 interface chips are used to receive and transmit low-speed serial port data, and MCV C8051F120 is...
Gespeichert in:
| Hauptverfasser: | , , |
|---|---|
| Format: | Tagungsbericht |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 5 |
|---|---|
| container_issue | |
| container_start_page | 1 |
| container_title | |
| container_volume | |
| creator | Dong Wu Lu Likun Li Yeli |
| description | Because of low transmission speed and difficult networking of serial ports, a data mutual conversion system between serial port and Ethernet based on W5100 and MCV C8051F120 is proposed. RS232 and RS422 interface chips are used to receive and transmit low-speed serial port data, and MCV C8051F120 is used as the core processing chip, and W5100 chip is used to receive and transmit Ethernet data. A specific hardware circuit is designed, and C language is used to finish the program of MCV. Because W5100 integrates TCP/IP protocol, MCV doesn't need to write complex TCP/IP protocol program. This conversion system can allow traditional equipment to access Ethernet, and the purpose of remote monitoring can be implemented. The experiment result shows that this system can implement data mutual conversion between serial port and Ethernet, and has characteristics of simplicity, reliability, high transmission efficiency, high stability, low cost, and has higher practicability and is worth to be propagated. |
| doi_str_mv | 10.1109/IASP.2012.6425075 |
| format | Conference Proceeding |
| fullrecord | <record><control><sourceid>ieee_6IE</sourceid><recordid>TN_cdi_ieee_primary_6425075</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>6425075</ieee_id><sourcerecordid>6425075</sourcerecordid><originalsourceid>FETCH-LOGICAL-i90t-1130b9b05099c5bc22bdc578a8941b0a47064a6e6e2ee2036f5a25cdf27b2f633</originalsourceid><addsrcrecordid>eNo1kEFLw0AUhFdUsNb8APGyfyDx7dvsbvZYitZCQcGABw9lN3mxkTYp2a3Sf2_EepoZmG8Ow9itgEwIsPfL2etLhiAw0zkqMOqMXYtcG4kq1-qcJdYU_9nYCzZBoXQKI3vFkhA-AX69Ri0n7L3cEK8ptB8d7xteu-j47hAPbsurvvuiIbR9x8MxRNpxT_GbaIw0tGNh3w-Ru67mFDc0dBS5d4FqPgJvSgDcsMvGbQMlJ52y8vGhnD-lq-fFcj5bpa2FmAohwVsPCqytlK8QfV0pU7jC5sKDyw3o3GnShEQIUjfKoarqBo3HRks5ZXd_sy0RrfdDu3PDcX26Rv4A2lRUvQ</addsrcrecordid><sourcetype>Publisher</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype></control><display><type>conference_proceeding</type><title>The design of data mutual conversion system between serial port and ethernet based on W5100</title><source>IEEE Electronic Library (IEL) Conference Proceedings</source><creator>Dong Wu ; Lu Likun ; Li Yeli</creator><creatorcontrib>Dong Wu ; Lu Likun ; Li Yeli</creatorcontrib><description>Because of low transmission speed and difficult networking of serial ports, a data mutual conversion system between serial port and Ethernet based on W5100 and MCV C8051F120 is proposed. RS232 and RS422 interface chips are used to receive and transmit low-speed serial port data, and MCV C8051F120 is used as the core processing chip, and W5100 chip is used to receive and transmit Ethernet data. A specific hardware circuit is designed, and C language is used to finish the program of MCV. Because W5100 integrates TCP/IP protocol, MCV doesn't need to write complex TCP/IP protocol program. This conversion system can allow traditional equipment to access Ethernet, and the purpose of remote monitoring can be implemented. The experiment result shows that this system can implement data mutual conversion between serial port and Ethernet, and has characteristics of simplicity, reliability, high transmission efficiency, high stability, low cost, and has higher practicability and is worth to be propagated.</description><identifier>ISSN: 2156-0110</identifier><identifier>ISBN: 9781467325479</identifier><identifier>ISBN: 1467325473</identifier><identifier>EISBN: 1467325465</identifier><identifier>EISBN: 9781467325462</identifier><identifier>DOI: 10.1109/IASP.2012.6425075</identifier><language>eng</language><publisher>IEEE</publisher><subject>C8051F120 ; Debugging ; Ethernet ; Hardware ; IP networks ; Ports (Computers) ; Protocols ; Registers ; serial port ; Software ; TCP/IP protocol ; W5100</subject><ispartof>2012 International Conference on Image Analysis and Signal Processing, 2012, p.1-5</ispartof><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/6425075$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>309,310,776,780,785,786,2052,27902,54895</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/6425075$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc></links><search><creatorcontrib>Dong Wu</creatorcontrib><creatorcontrib>Lu Likun</creatorcontrib><creatorcontrib>Li Yeli</creatorcontrib><title>The design of data mutual conversion system between serial port and ethernet based on W5100</title><title>2012 International Conference on Image Analysis and Signal Processing</title><addtitle>IASP</addtitle><description>Because of low transmission speed and difficult networking of serial ports, a data mutual conversion system between serial port and Ethernet based on W5100 and MCV C8051F120 is proposed. RS232 and RS422 interface chips are used to receive and transmit low-speed serial port data, and MCV C8051F120 is used as the core processing chip, and W5100 chip is used to receive and transmit Ethernet data. A specific hardware circuit is designed, and C language is used to finish the program of MCV. Because W5100 integrates TCP/IP protocol, MCV doesn't need to write complex TCP/IP protocol program. This conversion system can allow traditional equipment to access Ethernet, and the purpose of remote monitoring can be implemented. The experiment result shows that this system can implement data mutual conversion between serial port and Ethernet, and has characteristics of simplicity, reliability, high transmission efficiency, high stability, low cost, and has higher practicability and is worth to be propagated.</description><subject>C8051F120</subject><subject>Debugging</subject><subject>Ethernet</subject><subject>Hardware</subject><subject>IP networks</subject><subject>Ports (Computers)</subject><subject>Protocols</subject><subject>Registers</subject><subject>serial port</subject><subject>Software</subject><subject>TCP/IP protocol</subject><subject>W5100</subject><issn>2156-0110</issn><isbn>9781467325479</isbn><isbn>1467325473</isbn><isbn>1467325465</isbn><isbn>9781467325462</isbn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>2012</creationdate><recordtype>conference_proceeding</recordtype><sourceid>6IE</sourceid><sourceid>RIE</sourceid><recordid>eNo1kEFLw0AUhFdUsNb8APGyfyDx7dvsbvZYitZCQcGABw9lN3mxkTYp2a3Sf2_EepoZmG8Ow9itgEwIsPfL2etLhiAw0zkqMOqMXYtcG4kq1-qcJdYU_9nYCzZBoXQKI3vFkhA-AX69Ri0n7L3cEK8ptB8d7xteu-j47hAPbsurvvuiIbR9x8MxRNpxT_GbaIw0tGNh3w-Ru67mFDc0dBS5d4FqPgJvSgDcsMvGbQMlJ52y8vGhnD-lq-fFcj5bpa2FmAohwVsPCqytlK8QfV0pU7jC5sKDyw3o3GnShEQIUjfKoarqBo3HRks5ZXd_sy0RrfdDu3PDcX26Rv4A2lRUvQ</recordid><startdate>201211</startdate><enddate>201211</enddate><creator>Dong Wu</creator><creator>Lu Likun</creator><creator>Li Yeli</creator><general>IEEE</general><scope>6IE</scope><scope>6IL</scope><scope>CBEJK</scope><scope>RIE</scope><scope>RIL</scope></search><sort><creationdate>201211</creationdate><title>The design of data mutual conversion system between serial port and ethernet based on W5100</title><author>Dong Wu ; Lu Likun ; Li Yeli</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-i90t-1130b9b05099c5bc22bdc578a8941b0a47064a6e6e2ee2036f5a25cdf27b2f633</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>2012</creationdate><topic>C8051F120</topic><topic>Debugging</topic><topic>Ethernet</topic><topic>Hardware</topic><topic>IP networks</topic><topic>Ports (Computers)</topic><topic>Protocols</topic><topic>Registers</topic><topic>serial port</topic><topic>Software</topic><topic>TCP/IP protocol</topic><topic>W5100</topic><toplevel>online_resources</toplevel><creatorcontrib>Dong Wu</creatorcontrib><creatorcontrib>Lu Likun</creatorcontrib><creatorcontrib>Li Yeli</creatorcontrib><collection>IEEE Electronic Library (IEL) Conference Proceedings</collection><collection>IEEE Proceedings Order Plan All Online (POP All Online) 1998-present by volume</collection><collection>IEEE Xplore All Conference Proceedings</collection><collection>IEEE Electronic Library (IEL)</collection><collection>IEEE Proceedings Order Plans (POP All) 1998-Present</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Dong Wu</au><au>Lu Likun</au><au>Li Yeli</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>The design of data mutual conversion system between serial port and ethernet based on W5100</atitle><btitle>2012 International Conference on Image Analysis and Signal Processing</btitle><stitle>IASP</stitle><date>2012-11</date><risdate>2012</risdate><spage>1</spage><epage>5</epage><pages>1-5</pages><issn>2156-0110</issn><isbn>9781467325479</isbn><isbn>1467325473</isbn><eisbn>1467325465</eisbn><eisbn>9781467325462</eisbn><abstract>Because of low transmission speed and difficult networking of serial ports, a data mutual conversion system between serial port and Ethernet based on W5100 and MCV C8051F120 is proposed. RS232 and RS422 interface chips are used to receive and transmit low-speed serial port data, and MCV C8051F120 is used as the core processing chip, and W5100 chip is used to receive and transmit Ethernet data. A specific hardware circuit is designed, and C language is used to finish the program of MCV. Because W5100 integrates TCP/IP protocol, MCV doesn't need to write complex TCP/IP protocol program. This conversion system can allow traditional equipment to access Ethernet, and the purpose of remote monitoring can be implemented. The experiment result shows that this system can implement data mutual conversion between serial port and Ethernet, and has characteristics of simplicity, reliability, high transmission efficiency, high stability, low cost, and has higher practicability and is worth to be propagated.</abstract><pub>IEEE</pub><doi>10.1109/IASP.2012.6425075</doi><tpages>5</tpages></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | ISSN: 2156-0110 |
| ispartof | 2012 International Conference on Image Analysis and Signal Processing, 2012, p.1-5 |
| issn | 2156-0110 |
| language | eng |
| recordid | cdi_ieee_primary_6425075 |
| source | IEEE Electronic Library (IEL) Conference Proceedings |
| subjects | C8051F120 Debugging Ethernet Hardware IP networks Ports (Computers) Protocols Registers serial port Software TCP/IP protocol W5100 |
| title | The design of data mutual conversion system between serial port and ethernet based on W5100 |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-21T14%3A52%3A01IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-ieee_6IE&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=The%20design%20of%20data%20mutual%20conversion%20system%20between%20serial%20port%20and%20ethernet%20based%20on%20W5100&rft.btitle=2012%20International%20Conference%20on%20Image%20Analysis%20and%20Signal%20Processing&rft.au=Dong%20Wu&rft.date=2012-11&rft.spage=1&rft.epage=5&rft.pages=1-5&rft.issn=2156-0110&rft.isbn=9781467325479&rft.isbn_list=1467325473&rft_id=info:doi/10.1109/IASP.2012.6425075&rft_dat=%3Cieee_6IE%3E6425075%3C/ieee_6IE%3E%3Curl%3E%3C/url%3E&rft.eisbn=1467325465&rft.eisbn_list=9781467325462&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_ieee_id=6425075&rfr_iscdi=true |