Power line communication based automation system using a handheld Wi-Fi device
An open source automation system for controlling electrical appliances using power line communication is presented here. Control messages are sent over Wi-Fi network from a Wi-Fi device to the microcontroller which then couples the messages to the power lines. Ubiquitous power lines are used as phys...
Gespeichert in:
| Hauptverfasser: | , , , , |
|---|---|
| Format: | Tagungsbericht |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 6 |
|---|---|
| container_issue | |
| container_start_page | 1 |
| container_title | |
| container_volume | |
| creator | Shivaram, K. Rajendra, N. Mahesh, K. Murthy, K. N. B. Jawahar, P. |
| description | An open source automation system for controlling electrical appliances using power line communication is presented here. Control messages are sent over Wi-Fi network from a Wi-Fi device to the microcontroller which then couples the messages to the power lines. Ubiquitous power lines are used as physical media to transmit data over 220V/50Hz signal to control appliances/equipment. The data from the microcontroller is coupled onto the power lines using a PLC (Power Line Communication) modem and DCSK (Differential Code Shift Keying) modulation technique is employed to transmit data. Each receiver unit consists of PLC modem plus microcontroller and can be connected anywhere in the power line network. The receivers have addresses assigned to them and only respond to the commands sent to them by the transmitter PLC modem. The receiver unit controls the flow of electricity to the socket. The entire system is devoid of a computer to save power and make it low cost. Use of open source hardware, Power Line Communication and micro-controller collectively reduce the cost of controlling appliances remotely. |
| doi_str_mv | 10.1109/ISCE.2012.6241707 |
| format | Conference Proceeding |
| fullrecord | <record><control><sourceid>ieee_6IE</sourceid><recordid>TN_cdi_ieee_primary_6241707</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>6241707</ieee_id><sourcerecordid>6241707</sourcerecordid><originalsourceid>FETCH-LOGICAL-i90t-e24446a2d1655e823a7b5081ac8d3bd6597b5ae26e44206a970747d0e2977fc13</originalsourceid><addsrcrecordid>eNo1UNtKw0AUXG9grPkA8WV_IHXPXrOPElotFBUs6FvZZE_tSpNINlH690Za52WYmcOBGUJugE0BmL1bvBazKWfAp5pLMMyckCuQ2ggQSulTknBQNgPJxRlJrcn_MynPScKMNJnW-fslSWP8ZCPGC2AyIU8v7Q92dBcapFVb10MTKteHtqGli-ipG_q2PhhxH3us6RBD80Ed3brGb3Hn6VvI5oF6_A4VXpOLjdtFTI88Iav5bFU8Zsvnh0Vxv8yCZX2GXEqpHfeglcKcC2dKxXJwVe5F6bWyo3bINUrJmXbW_DXwDLk1ZlOBmJDbw9uAiOuvLtSu26-Py4hfvuBSRg</addsrcrecordid><sourcetype>Publisher</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype></control><display><type>conference_proceeding</type><title>Power line communication based automation system using a handheld Wi-Fi device</title><source>IEEE Electronic Library (IEL) Conference Proceedings</source><creator>Shivaram, K. ; Rajendra, N. ; Mahesh, K. ; Murthy, K. N. B. ; Jawahar, P.</creator><creatorcontrib>Shivaram, K. ; Rajendra, N. ; Mahesh, K. ; Murthy, K. N. B. ; Jawahar, P.</creatorcontrib><description>An open source automation system for controlling electrical appliances using power line communication is presented here. Control messages are sent over Wi-Fi network from a Wi-Fi device to the microcontroller which then couples the messages to the power lines. Ubiquitous power lines are used as physical media to transmit data over 220V/50Hz signal to control appliances/equipment. The data from the microcontroller is coupled onto the power lines using a PLC (Power Line Communication) modem and DCSK (Differential Code Shift Keying) modulation technique is employed to transmit data. Each receiver unit consists of PLC modem plus microcontroller and can be connected anywhere in the power line network. The receivers have addresses assigned to them and only respond to the commands sent to them by the transmitter PLC modem. The receiver unit controls the flow of electricity to the socket. The entire system is devoid of a computer to save power and make it low cost. Use of open source hardware, Power Line Communication and micro-controller collectively reduce the cost of controlling appliances remotely.</description><identifier>ISSN: 0747-668X</identifier><identifier>ISBN: 9781467313544</identifier><identifier>ISBN: 1467313548</identifier><identifier>EISSN: 2159-1423</identifier><identifier>EISBN: 1467313556</identifier><identifier>EISBN: 9781467313551</identifier><identifier>EISBN: 9781467313568</identifier><identifier>EISBN: 1467313564</identifier><identifier>DOI: 10.1109/ISCE.2012.6241707</identifier><language>eng</language><publisher>IEEE</publisher><subject>Automation ; DCSK ; Home appliances ; IEEE 802.11 Standards ; Modems ; Modulation ; Open Sound Control ; Open Source ; PLC ; Power line communications ; Protocols ; Receivers ; Wi-Fi</subject><ispartof>2012 IEEE 16th International Symposium on Consumer Electronics, 2012, p.1-6</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/6241707$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>309,310,777,781,786,787,793,2052,27906,54739,54901</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/6241707$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc></links><search><creatorcontrib>Shivaram, K.</creatorcontrib><creatorcontrib>Rajendra, N.</creatorcontrib><creatorcontrib>Mahesh, K.</creatorcontrib><creatorcontrib>Murthy, K. N. B.</creatorcontrib><creatorcontrib>Jawahar, P.</creatorcontrib><title>Power line communication based automation system using a handheld Wi-Fi device</title><title>2012 IEEE 16th International Symposium on Consumer Electronics</title><addtitle>ISCE</addtitle><description>An open source automation system for controlling electrical appliances using power line communication is presented here. Control messages are sent over Wi-Fi network from a Wi-Fi device to the microcontroller which then couples the messages to the power lines. Ubiquitous power lines are used as physical media to transmit data over 220V/50Hz signal to control appliances/equipment. The data from the microcontroller is coupled onto the power lines using a PLC (Power Line Communication) modem and DCSK (Differential Code Shift Keying) modulation technique is employed to transmit data. Each receiver unit consists of PLC modem plus microcontroller and can be connected anywhere in the power line network. The receivers have addresses assigned to them and only respond to the commands sent to them by the transmitter PLC modem. The receiver unit controls the flow of electricity to the socket. The entire system is devoid of a computer to save power and make it low cost. Use of open source hardware, Power Line Communication and micro-controller collectively reduce the cost of controlling appliances remotely.</description><subject>Automation</subject><subject>DCSK</subject><subject>Home appliances</subject><subject>IEEE 802.11 Standards</subject><subject>Modems</subject><subject>Modulation</subject><subject>Open Sound Control</subject><subject>Open Source</subject><subject>PLC</subject><subject>Power line communications</subject><subject>Protocols</subject><subject>Receivers</subject><subject>Wi-Fi</subject><issn>0747-668X</issn><issn>2159-1423</issn><isbn>9781467313544</isbn><isbn>1467313548</isbn><isbn>1467313556</isbn><isbn>9781467313551</isbn><isbn>9781467313568</isbn><isbn>1467313564</isbn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>2012</creationdate><recordtype>conference_proceeding</recordtype><sourceid>6IE</sourceid><sourceid>RIE</sourceid><recordid>eNo1UNtKw0AUXG9grPkA8WV_IHXPXrOPElotFBUs6FvZZE_tSpNINlH690Za52WYmcOBGUJugE0BmL1bvBazKWfAp5pLMMyckCuQ2ggQSulTknBQNgPJxRlJrcn_MynPScKMNJnW-fslSWP8ZCPGC2AyIU8v7Q92dBcapFVb10MTKteHtqGli-ipG_q2PhhxH3us6RBD80Ed3brGb3Hn6VvI5oF6_A4VXpOLjdtFTI88Iav5bFU8Zsvnh0Vxv8yCZX2GXEqpHfeglcKcC2dKxXJwVe5F6bWyo3bINUrJmXbW_DXwDLk1ZlOBmJDbw9uAiOuvLtSu26-Py4hfvuBSRg</recordid><startdate>201206</startdate><enddate>201206</enddate><creator>Shivaram, K.</creator><creator>Rajendra, N.</creator><creator>Mahesh, K.</creator><creator>Murthy, K. N. B.</creator><creator>Jawahar, P.</creator><general>IEEE</general><scope>6IE</scope><scope>6IL</scope><scope>CBEJK</scope><scope>RIE</scope><scope>RIL</scope></search><sort><creationdate>201206</creationdate><title>Power line communication based automation system using a handheld Wi-Fi device</title><author>Shivaram, K. ; Rajendra, N. ; Mahesh, K. ; Murthy, K. N. B. ; Jawahar, P.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-i90t-e24446a2d1655e823a7b5081ac8d3bd6597b5ae26e44206a970747d0e2977fc13</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>2012</creationdate><topic>Automation</topic><topic>DCSK</topic><topic>Home appliances</topic><topic>IEEE 802.11 Standards</topic><topic>Modems</topic><topic>Modulation</topic><topic>Open Sound Control</topic><topic>Open Source</topic><topic>PLC</topic><topic>Power line communications</topic><topic>Protocols</topic><topic>Receivers</topic><topic>Wi-Fi</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Shivaram, K.</creatorcontrib><creatorcontrib>Rajendra, N.</creatorcontrib><creatorcontrib>Mahesh, K.</creatorcontrib><creatorcontrib>Murthy, K. N. B.</creatorcontrib><creatorcontrib>Jawahar, P.</creatorcontrib><collection>IEEE Electronic Library (IEL) Conference Proceedings</collection><collection>IEEE Proceedings Order Plan All Online (POP All Online) 1998-present by volume</collection><collection>IEEE Xplore All Conference Proceedings</collection><collection>IEEE Electronic Library (IEL)</collection><collection>IEEE Proceedings Order Plans (POP All) 1998-Present</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Shivaram, K.</au><au>Rajendra, N.</au><au>Mahesh, K.</au><au>Murthy, K. N. B.</au><au>Jawahar, P.</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>Power line communication based automation system using a handheld Wi-Fi device</atitle><btitle>2012 IEEE 16th International Symposium on Consumer Electronics</btitle><stitle>ISCE</stitle><date>2012-06</date><risdate>2012</risdate><spage>1</spage><epage>6</epage><pages>1-6</pages><issn>0747-668X</issn><eissn>2159-1423</eissn><isbn>9781467313544</isbn><isbn>1467313548</isbn><eisbn>1467313556</eisbn><eisbn>9781467313551</eisbn><eisbn>9781467313568</eisbn><eisbn>1467313564</eisbn><abstract>An open source automation system for controlling electrical appliances using power line communication is presented here. Control messages are sent over Wi-Fi network from a Wi-Fi device to the microcontroller which then couples the messages to the power lines. Ubiquitous power lines are used as physical media to transmit data over 220V/50Hz signal to control appliances/equipment. The data from the microcontroller is coupled onto the power lines using a PLC (Power Line Communication) modem and DCSK (Differential Code Shift Keying) modulation technique is employed to transmit data. Each receiver unit consists of PLC modem plus microcontroller and can be connected anywhere in the power line network. The receivers have addresses assigned to them and only respond to the commands sent to them by the transmitter PLC modem. The receiver unit controls the flow of electricity to the socket. The entire system is devoid of a computer to save power and make it low cost. Use of open source hardware, Power Line Communication and micro-controller collectively reduce the cost of controlling appliances remotely.</abstract><pub>IEEE</pub><doi>10.1109/ISCE.2012.6241707</doi><tpages>6</tpages></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | ISSN: 0747-668X |
| ispartof | 2012 IEEE 16th International Symposium on Consumer Electronics, 2012, p.1-6 |
| issn | 0747-668X 2159-1423 |
| language | eng |
| recordid | cdi_ieee_primary_6241707 |
| source | IEEE Electronic Library (IEL) Conference Proceedings |
| subjects | Automation DCSK Home appliances IEEE 802.11 Standards Modems Modulation Open Sound Control Open Source PLC Power line communications Protocols Receivers Wi-Fi |
| title | Power line communication based automation system using a handheld Wi-Fi device |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-20T06%3A26%3A58IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-ieee_6IE&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=Power%20line%20communication%20based%20automation%20system%20using%20a%20handheld%20Wi-Fi%20device&rft.btitle=2012%20IEEE%2016th%20International%20Symposium%20on%20Consumer%20Electronics&rft.au=Shivaram,%20K.&rft.date=2012-06&rft.spage=1&rft.epage=6&rft.pages=1-6&rft.issn=0747-668X&rft.eissn=2159-1423&rft.isbn=9781467313544&rft.isbn_list=1467313548&rft_id=info:doi/10.1109/ISCE.2012.6241707&rft_dat=%3Cieee_6IE%3E6241707%3C/ieee_6IE%3E%3Curl%3E%3C/url%3E&rft.eisbn=1467313556&rft.eisbn_list=9781467313551&rft.eisbn_list=9781467313568&rft.eisbn_list=1467313564&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_ieee_id=6241707&rfr_iscdi=true |