Corrosion behavior of 0.02-2.0wt% Vanadium alloyed grey iron
This paper focused on corrosion behavior of grey cast iron having 0.02wt %, 0.5wt% and 2wt% vanadium as the alloying elements. Vanadium alloyed grey cast iron samples were produced by using Y - block CO 2 sand casting process and poured into double cylinder mould. The corrosion behavior was measured...
Gespeichert in:
| Hauptverfasser: | , , , , , |
|---|---|
| Format: | Tagungsbericht |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 188 |
|---|---|
| container_issue | |
| container_start_page | 184 |
| container_title | |
| container_volume | |
| creator | Alias, S. K. Abdullah, B. Idham, M. F. Latip, S. A. Rahman, H. A. Jahidi, H. |
| description | This paper focused on corrosion behavior of grey cast iron having 0.02wt %, 0.5wt% and 2wt% vanadium as the alloying elements. Vanadium alloyed grey cast iron samples were produced by using Y - block CO 2 sand casting process and poured into double cylinder mould. The corrosion behavior was measured from polarization method, under 3.5% NaCl aqueous solution, conducted at room temperature. The corroded surfaces were then observed through scanning electron microscopy (SEM) and the compositions were obtained through sparked EDX analyzer. The microstructure vanadium alloyed grey cast iron show the presences of graphite flakes surrounded by ferritic structures. The corrosion rate, which was obtained from polarization test indicated that 2% alloyed grey cast iron produced better corrosion resistance compared with 0.02% and 0.5% vanadium alloyed grey cast iron. |
| doi_str_mv | 10.1109/CHUSER.2011.6163713 |
| format | Conference Proceeding |
| fullrecord | <record><control><sourceid>ieee_6IE</sourceid><recordid>TN_cdi_ieee_primary_6163713</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>6163713</ieee_id><sourcerecordid>6163713</sourcerecordid><originalsourceid>FETCH-LOGICAL-i90t-adaece31a21de277b9a4061e4aac51e7eaa81eb9679af19ea0f14e3fd91219a53</originalsourceid><addsrcrecordid>eNpFj8FKAzEURSMiqLVf0E02Lmd8L5kmBtzIUFuhUKjVbXnTvGhkOpFMVebvFSx4N4ezOXCFmCCUiOBu6sXz02xdKkAsDRptUZ-IS6yM1QAK3Om_oD0X475_h98Z49DqC3FXp5xTH1MnG36jr5iyTEFCCapQJXwfruULdeTj515S26aBvXzNPMiYU3clzgK1PY-PHInNw2xTL4rlav5Y3y-L6OBQkCfesUZS6FlZ2ziqwCBXRLspsmWiW-TGGesooGOCgBXr4B0qdDTVIzH5y0Zm3n7kuKc8bI9n9Q9BtEfc</addsrcrecordid><sourcetype>Publisher</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype></control><display><type>conference_proceeding</type><title>Corrosion behavior of 0.02-2.0wt% Vanadium alloyed grey iron</title><source>IEEE Electronic Library (IEL) Conference Proceedings</source><creator>Alias, S. K. ; Abdullah, B. ; Idham, M. F. ; Latip, S. A. ; Rahman, H. A. ; Jahidi, H.</creator><creatorcontrib>Alias, S. K. ; Abdullah, B. ; Idham, M. F. ; Latip, S. A. ; Rahman, H. A. ; Jahidi, H.</creatorcontrib><description>This paper focused on corrosion behavior of grey cast iron having 0.02wt %, 0.5wt% and 2wt% vanadium as the alloying elements. Vanadium alloyed grey cast iron samples were produced by using Y - block CO 2 sand casting process and poured into double cylinder mould. The corrosion behavior was measured from polarization method, under 3.5% NaCl aqueous solution, conducted at room temperature. The corroded surfaces were then observed through scanning electron microscopy (SEM) and the compositions were obtained through sparked EDX analyzer. The microstructure vanadium alloyed grey cast iron show the presences of graphite flakes surrounded by ferritic structures. The corrosion rate, which was obtained from polarization test indicated that 2% alloyed grey cast iron produced better corrosion resistance compared with 0.02% and 0.5% vanadium alloyed grey cast iron.</description><identifier>ISBN: 1467300217</identifier><identifier>ISBN: 9781467300216</identifier><identifier>EISBN: 1467300209</identifier><identifier>EISBN: 1467300195</identifier><identifier>EISBN: 9781467300209</identifier><identifier>EISBN: 9781467300193</identifier><identifier>DOI: 10.1109/CHUSER.2011.6163713</identifier><language>eng</language><publisher>IEEE</publisher><subject>Cast iron ; Chromium ; Corrosion ; Optical polarization ; polarization ; Silicon ; vanadium</subject><ispartof>2011 IEEE Colloquium on Humanities, Science and Engineering, 2011, p.184-188</ispartof><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/6163713$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>309,310,776,780,785,786,2051,27904,54899</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/6163713$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc></links><search><creatorcontrib>Alias, S. K.</creatorcontrib><creatorcontrib>Abdullah, B.</creatorcontrib><creatorcontrib>Idham, M. F.</creatorcontrib><creatorcontrib>Latip, S. A.</creatorcontrib><creatorcontrib>Rahman, H. A.</creatorcontrib><creatorcontrib>Jahidi, H.</creatorcontrib><title>Corrosion behavior of 0.02-2.0wt% Vanadium alloyed grey iron</title><title>2011 IEEE Colloquium on Humanities, Science and Engineering</title><addtitle>CHUSER</addtitle><description>This paper focused on corrosion behavior of grey cast iron having 0.02wt %, 0.5wt% and 2wt% vanadium as the alloying elements. Vanadium alloyed grey cast iron samples were produced by using Y - block CO 2 sand casting process and poured into double cylinder mould. The corrosion behavior was measured from polarization method, under 3.5% NaCl aqueous solution, conducted at room temperature. The corroded surfaces were then observed through scanning electron microscopy (SEM) and the compositions were obtained through sparked EDX analyzer. The microstructure vanadium alloyed grey cast iron show the presences of graphite flakes surrounded by ferritic structures. The corrosion rate, which was obtained from polarization test indicated that 2% alloyed grey cast iron produced better corrosion resistance compared with 0.02% and 0.5% vanadium alloyed grey cast iron.</description><subject>Cast iron</subject><subject>Chromium</subject><subject>Corrosion</subject><subject>Optical polarization</subject><subject>polarization</subject><subject>Silicon</subject><subject>vanadium</subject><isbn>1467300217</isbn><isbn>9781467300216</isbn><isbn>1467300209</isbn><isbn>1467300195</isbn><isbn>9781467300209</isbn><isbn>9781467300193</isbn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>2011</creationdate><recordtype>conference_proceeding</recordtype><sourceid>6IE</sourceid><sourceid>RIE</sourceid><recordid>eNpFj8FKAzEURSMiqLVf0E02Lmd8L5kmBtzIUFuhUKjVbXnTvGhkOpFMVebvFSx4N4ezOXCFmCCUiOBu6sXz02xdKkAsDRptUZ-IS6yM1QAK3Om_oD0X475_h98Z49DqC3FXp5xTH1MnG36jr5iyTEFCCapQJXwfruULdeTj515S26aBvXzNPMiYU3clzgK1PY-PHInNw2xTL4rlav5Y3y-L6OBQkCfesUZS6FlZ2ziqwCBXRLspsmWiW-TGGesooGOCgBXr4B0qdDTVIzH5y0Zm3n7kuKc8bI9n9Q9BtEfc</recordid><startdate>201112</startdate><enddate>201112</enddate><creator>Alias, S. K.</creator><creator>Abdullah, B.</creator><creator>Idham, M. F.</creator><creator>Latip, S. A.</creator><creator>Rahman, H. A.</creator><creator>Jahidi, H.</creator><general>IEEE</general><scope>6IE</scope><scope>6IL</scope><scope>CBEJK</scope><scope>RIE</scope><scope>RIL</scope></search><sort><creationdate>201112</creationdate><title>Corrosion behavior of 0.02-2.0wt% Vanadium alloyed grey iron</title><author>Alias, S. K. ; Abdullah, B. ; Idham, M. F. ; Latip, S. A. ; Rahman, H. A. ; Jahidi, H.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-i90t-adaece31a21de277b9a4061e4aac51e7eaa81eb9679af19ea0f14e3fd91219a53</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>2011</creationdate><topic>Cast iron</topic><topic>Chromium</topic><topic>Corrosion</topic><topic>Optical polarization</topic><topic>polarization</topic><topic>Silicon</topic><topic>vanadium</topic><toplevel>online_resources</toplevel><creatorcontrib>Alias, S. K.</creatorcontrib><creatorcontrib>Abdullah, B.</creatorcontrib><creatorcontrib>Idham, M. F.</creatorcontrib><creatorcontrib>Latip, S. A.</creatorcontrib><creatorcontrib>Rahman, H. A.</creatorcontrib><creatorcontrib>Jahidi, H.</creatorcontrib><collection>IEEE Electronic Library (IEL) Conference Proceedings</collection><collection>IEEE Proceedings Order Plan All Online (POP All Online) 1998-present by volume</collection><collection>IEEE Xplore All Conference Proceedings</collection><collection>IEEE Electronic Library (IEL)</collection><collection>IEEE Proceedings Order Plans (POP All) 1998-Present</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Alias, S. K.</au><au>Abdullah, B.</au><au>Idham, M. F.</au><au>Latip, S. A.</au><au>Rahman, H. A.</au><au>Jahidi, H.</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>Corrosion behavior of 0.02-2.0wt% Vanadium alloyed grey iron</atitle><btitle>2011 IEEE Colloquium on Humanities, Science and Engineering</btitle><stitle>CHUSER</stitle><date>2011-12</date><risdate>2011</risdate><spage>184</spage><epage>188</epage><pages>184-188</pages><isbn>1467300217</isbn><isbn>9781467300216</isbn><eisbn>1467300209</eisbn><eisbn>1467300195</eisbn><eisbn>9781467300209</eisbn><eisbn>9781467300193</eisbn><abstract>This paper focused on corrosion behavior of grey cast iron having 0.02wt %, 0.5wt% and 2wt% vanadium as the alloying elements. Vanadium alloyed grey cast iron samples were produced by using Y - block CO 2 sand casting process and poured into double cylinder mould. The corrosion behavior was measured from polarization method, under 3.5% NaCl aqueous solution, conducted at room temperature. The corroded surfaces were then observed through scanning electron microscopy (SEM) and the compositions were obtained through sparked EDX analyzer. The microstructure vanadium alloyed grey cast iron show the presences of graphite flakes surrounded by ferritic structures. The corrosion rate, which was obtained from polarization test indicated that 2% alloyed grey cast iron produced better corrosion resistance compared with 0.02% and 0.5% vanadium alloyed grey cast iron.</abstract><pub>IEEE</pub><doi>10.1109/CHUSER.2011.6163713</doi><tpages>5</tpages></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | ISBN: 1467300217 |
| ispartof | 2011 IEEE Colloquium on Humanities, Science and Engineering, 2011, p.184-188 |
| issn | |
| language | eng |
| recordid | cdi_ieee_primary_6163713 |
| source | IEEE Electronic Library (IEL) Conference Proceedings |
| subjects | Cast iron Chromium Corrosion Optical polarization polarization Silicon vanadium |
| title | Corrosion behavior of 0.02-2.0wt% Vanadium alloyed grey iron |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-22T01%3A36%3A30IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-ieee_6IE&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=Corrosion%20behavior%20of%200.02-2.0wt%25%20Vanadium%20alloyed%20grey%20iron&rft.btitle=2011%20IEEE%20Colloquium%20on%20Humanities,%20Science%20and%20Engineering&rft.au=Alias,%20S.%20K.&rft.date=2011-12&rft.spage=184&rft.epage=188&rft.pages=184-188&rft.isbn=1467300217&rft.isbn_list=9781467300216&rft_id=info:doi/10.1109/CHUSER.2011.6163713&rft_dat=%3Cieee_6IE%3E6163713%3C/ieee_6IE%3E%3Curl%3E%3C/url%3E&rft.eisbn=1467300209&rft.eisbn_list=1467300195&rft.eisbn_list=9781467300209&rft.eisbn_list=9781467300193&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_ieee_id=6163713&rfr_iscdi=true |