Intelligent mechatronic equipment for shock and axes distance control of free gears 1,2,3,4 and primary shaft

The intelligent mechatronic equipment is structured on a checking table on which the main shaft is mounted between a running centre with rolling elements and a precision bushing with canals and 4 slides on rolling guides with compressed-air buffers on which the checking gears are mounted for detecting the shocks and axle base. The teeth shaft and checking gears in contact are driven into a rotation movement by an AC (alternating current) gear motor with reducer and speed variation, with a speed of 30-40 rpm. The "shocks", respectively the toothing defects and axes distance variation are detected and measured through the movement of the slides with rolling guides and read through the incremental transducer with linear movement with a stroke of minimum 6 mm. During operation, the system is protected by protective light barriers. The results of the intelligent measuring process are displayed on the panel of the industrial SIEMENS computer.