A phase compensated, motion insensitive coaxial connector

A new and unique connector design is presented that employs a novel circuit element to compensate for phase changes that occur with connector movement. The connector design is capable of providing better than 40 dB of improvement over the conventional connector in the modulation sideband levels caus...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
1. Verfasser:	Gipprich, J.W.
Format:	Tagungsbericht
Sprache:	eng
Schlagworte:	Antenna arrays Bandwidth Coaxial components Conductors Connectors Coupling circuits Impedance Microwave frequencies Phased arrays Vibrations
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

container_end_page	1204 vol.2
container_issue
container_start_page	1201
container_title
container_volume	2
creator	Gipprich, J.W.
description	A new and unique connector design is presented that employs a novel circuit element to compensate for phase changes that occur with connector movement. The connector design is capable of providing better than 40 dB of improvement over the conventional connector in the modulation sideband levels caused by relative motion such as that seen under mechanical vibrations. This improvement may be achieved with practical designs over moderately large bandwidths up to 20% or more at microwave frequencies.
doi_str_mv	10.1109/MWSYM.1996.511245
format	Conference Proceeding
fullrecord	<record><control><sourceid>ieee_6IE</sourceid><recordid>TN_cdi_ieee_primary_511245</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>511245</ieee_id><sourcerecordid>511245</sourcerecordid><originalsourceid>FETCH-LOGICAL-i172t-b93a87716ee0c4da0b195526d7e63d759cb2b5d301ab5e939afbbadbd250ce693</originalsourceid><addsrcrecordid>eNotj8tKA0EURBsf4CTmA3Q1H-CMffuZuwzBaCDBhYq6Ct3TN9iSeTA9iP69I7E2B6qgimLsCngJwPF2-_r0vi0B0ZQaQCh9wjKhrSmsAHPKJtzOuZRCGXPGMg4KC6P02wWbpfTJRymthcaM4SLvPlyivGrrjprkBgo3ed0OsW3y2KTRikP8-svdd3SHkU1D1dD2l-x87w6JZv-cspfV3fPyodg83q-Xi00RwYqh8Cjd3FowRLxSwXEPOG6bYMnIYDVWXngdJAfnNaFEt_feBR-E5hUZlFN2feyNRLTr-li7_md3PC1_Adm6Sec</addsrcrecordid><sourcetype>Publisher</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype></control><display><type>conference_proceeding</type><title>A phase compensated, motion insensitive coaxial connector</title><source>IEEE Electronic Library (IEL) Conference Proceedings</source><creator>Gipprich, J.W.</creator><creatorcontrib>Gipprich, J.W.</creatorcontrib><description>A new and unique connector design is presented that employs a novel circuit element to compensate for phase changes that occur with connector movement. The connector design is capable of providing better than 40 dB of improvement over the conventional connector in the modulation sideband levels caused by relative motion such as that seen under mechanical vibrations. This improvement may be achieved with practical designs over moderately large bandwidths up to 20% or more at microwave frequencies.</description><identifier>ISSN: 0149-645X</identifier><identifier>ISBN: 0780332466</identifier><identifier>ISBN: 9780780332461</identifier><identifier>EISSN: 2576-7216</identifier><identifier>DOI: 10.1109/MWSYM.1996.511245</identifier><language>eng</language><publisher>IEEE</publisher><subject>Antenna arrays ; Bandwidth ; Coaxial components ; Conductors ; Connectors ; Coupling circuits ; Impedance ; Microwave frequencies ; Phased arrays ; Vibrations</subject><ispartof>1996 IEEE MTT-S International Microwave Symposium Digest, 1996, Vol.2, p.1201-1204 vol.2</ispartof><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/511245$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>309,310,776,780,785,786,2052,4036,4037,27902,54895</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/511245$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc></links><search><creatorcontrib>Gipprich, J.W.</creatorcontrib><title>A phase compensated, motion insensitive coaxial connector</title><title>1996 IEEE MTT-S International Microwave Symposium Digest</title><addtitle>MWSYM</addtitle><description>A new and unique connector design is presented that employs a novel circuit element to compensate for phase changes that occur with connector movement. The connector design is capable of providing better than 40 dB of improvement over the conventional connector in the modulation sideband levels caused by relative motion such as that seen under mechanical vibrations. This improvement may be achieved with practical designs over moderately large bandwidths up to 20% or more at microwave frequencies.</description><subject>Antenna arrays</subject><subject>Bandwidth</subject><subject>Coaxial components</subject><subject>Conductors</subject><subject>Connectors</subject><subject>Coupling circuits</subject><subject>Impedance</subject><subject>Microwave frequencies</subject><subject>Phased arrays</subject><subject>Vibrations</subject><issn>0149-645X</issn><issn>2576-7216</issn><isbn>0780332466</isbn><isbn>9780780332461</isbn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>1996</creationdate><recordtype>conference_proceeding</recordtype><sourceid>6IE</sourceid><sourceid>RIE</sourceid><recordid>eNotj8tKA0EURBsf4CTmA3Q1H-CMffuZuwzBaCDBhYq6Ct3TN9iSeTA9iP69I7E2B6qgimLsCngJwPF2-_r0vi0B0ZQaQCh9wjKhrSmsAHPKJtzOuZRCGXPGMg4KC6P02wWbpfTJRymthcaM4SLvPlyivGrrjprkBgo3ed0OsW3y2KTRikP8-svdd3SHkU1D1dD2l-x87w6JZv-cspfV3fPyodg83q-Xi00RwYqh8Cjd3FowRLxSwXEPOG6bYMnIYDVWXngdJAfnNaFEt_feBR-E5hUZlFN2feyNRLTr-li7_md3PC1_Adm6Sec</recordid><startdate>1996</startdate><enddate>1996</enddate><creator>Gipprich, J.W.</creator><general>IEEE</general><scope>6IE</scope><scope>6IL</scope><scope>CBEJK</scope><scope>RIE</scope><scope>RIL</scope></search><sort><creationdate>1996</creationdate><title>A phase compensated, motion insensitive coaxial connector</title><author>Gipprich, J.W.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-i172t-b93a87716ee0c4da0b195526d7e63d759cb2b5d301ab5e939afbbadbd250ce693</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>1996</creationdate><topic>Antenna arrays</topic><topic>Bandwidth</topic><topic>Coaxial components</topic><topic>Conductors</topic><topic>Connectors</topic><topic>Coupling circuits</topic><topic>Impedance</topic><topic>Microwave frequencies</topic><topic>Phased arrays</topic><topic>Vibrations</topic><toplevel>online_resources</toplevel><creatorcontrib>Gipprich, J.W.</creatorcontrib><collection>IEEE Electronic Library (IEL) Conference Proceedings</collection><collection>IEEE Proceedings Order Plan All Online (POP All Online) 1998-present by volume</collection><collection>IEEE Xplore All Conference Proceedings</collection><collection>IEEE Electronic Library (IEL)</collection><collection>IEEE Proceedings Order Plans (POP All) 1998-Present</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Gipprich, J.W.</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>A phase compensated, motion insensitive coaxial connector</atitle><btitle>1996 IEEE MTT-S International Microwave Symposium Digest</btitle><stitle>MWSYM</stitle><date>1996</date><risdate>1996</risdate><volume>2</volume><spage>1201</spage><epage>1204 vol.2</epage><pages>1201-1204 vol.2</pages><issn>0149-645X</issn><eissn>2576-7216</eissn><isbn>0780332466</isbn><isbn>9780780332461</isbn><abstract>A new and unique connector design is presented that employs a novel circuit element to compensate for phase changes that occur with connector movement. The connector design is capable of providing better than 40 dB of improvement over the conventional connector in the modulation sideband levels caused by relative motion such as that seen under mechanical vibrations. This improvement may be achieved with practical designs over moderately large bandwidths up to 20% or more at microwave frequencies.</abstract><pub>IEEE</pub><doi>10.1109/MWSYM.1996.511245</doi></addata></record>
fulltext	fulltext_linktorsrc
identifier	ISSN: 0149-645X
ispartof	1996 IEEE MTT-S International Microwave Symposium Digest, 1996, Vol.2, p.1201-1204 vol.2
issn	0149-645X 2576-7216
language	eng
recordid	cdi_ieee_primary_511245
source	IEEE Electronic Library (IEL) Conference Proceedings
subjects	Antenna arrays Bandwidth Coaxial components Conductors Connectors Coupling circuits Impedance Microwave frequencies Phased arrays Vibrations
title	A phase compensated, motion insensitive coaxial connector
url	https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-04T00%3A29%3A32IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-ieee_6IE&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=A%20phase%20compensated,%20motion%20insensitive%20coaxial%20connector&rft.btitle=1996%20IEEE%20MTT-S%20International%20Microwave%20Symposium%20Digest&rft.au=Gipprich,%20J.W.&rft.date=1996&rft.volume=2&rft.spage=1201&rft.epage=1204%20vol.2&rft.pages=1201-1204%20vol.2&rft.issn=0149-645X&rft.eissn=2576-7216&rft.isbn=0780332466&rft.isbn_list=9780780332461&rft_id=info:doi/10.1109/MWSYM.1996.511245&rft_dat=%3Cieee_6IE%3E511245%3C/ieee_6IE%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_ieee_id=511245&rfr_iscdi=true