Low-Cost Multicystalline Silicon Wafers by Purifying Metallurgical Grade Silicon with Tin Solution

The PV industry is currently facing serious difficulty in finding silicon feedstock to shore up their expansion plan to meet the rapid growth of the solar cell market. The work reported here is an effort to tackle the severe problem of silicon shortage for PV industry, and to bring down the cost for...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Yuepeng Wan, Raghavan, P.S., Chartier, C., Talbott, J., Khattak, C.
Format: Tagungsbericht
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 1345
container_issue
container_start_page 1342
container_title
container_volume 2
creator Yuepeng Wan
Raghavan, P.S.
Chartier, C.
Talbott, J.
Khattak, C.
description The PV industry is currently facing serious difficulty in finding silicon feedstock to shore up their expansion plan to meet the rapid growth of the solar cell market. The work reported here is an effort to tackle the severe problem of silicon shortage for PV industry, and to bring down the cost for solar wafer production. A single-step process of producing silicon wafers directly from metallurgical grade silicon (MGSi) is being developed in GT Equipment Technologies, Inc (GTi). In this process, tin is used as a solvent to dissolve both silicon and impurities in the MGSi, and to retain most of the impurities during silicon crystallization. By applying the shaped crystal growth technology, silicon ribbons are pulled out of the Si-Sn melt. The thin silicon ribbons can be used directly as solar wafers. The final goal of this project is to obtain silicon ribbon that can be used directly as wafers for solar cells with targeting efficiency of no less than 14%. The preliminary objectives of the current research phase is to obtain 2" wide silicon ribbons, to analyze the purity of the grown ribbons, to characterize the electrical properties of the ribbon, and to develop a prototype puller for growing 5 to 6 inch wide silicon ribbons out of the Si-Sn solution. The experimental work on the single-step silicon wafer from MG-Si so far has demonstrated that silicon ribbons can be pulled from the MG-Si and Sn solution. Significant reduction of concentration in the grown ribbons has been observed for most of the metallic impurities. The reduction effect results from partitioning of impurities into tin. However, the reduction of both boron and phosphorus is not significant. Also, the obtained samples contain large amount of tin (several hundred ppm to 1%). The measured lifetime of the obtained wafer is still low (0.1 to 1.0 microsecond). Further reduction in boron and phosphorus level is required and the effect the tin inclusion needs to be investigated
doi_str_mv 10.1109/WCPEC.2006.279679
format Conference Proceeding
fullrecord <record><control><sourceid>ieee_6IE</sourceid><recordid>TN_cdi_ieee_primary_4059893</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>4059893</ieee_id><sourcerecordid>4059893</sourcerecordid><originalsourceid>FETCH-LOGICAL-i175t-c01808a0b250c3cb252ab584541b51c9041d83234e048250da646030f32755753</originalsourceid><addsrcrecordid>eNpFzNtKw0AUheERFWyrDyDezAuk7j2HzORSQq1Ci4VWelkm00ndMiaSAyVvb0WhVx8LfhZj9whTRMget_lqlk8FQDoVJktNdsHGqIRSAGjw8jxSecVGJyCx0uANG7ftJ4AAmeKIFYv6mOR12_FlHzvyQ9u5GKkKfE2RfF3xrStD0_Ji4Ku-oXKg6sCX4bfqmwN5F_m8cftzf6Tug2-o4us69h3V1S27Ll1sw92_E_b-PNvkL8nibf6aPy0SQqO7xANasA4KocFLf0K4QlulFRYafQYK91YKqQIoe2r2LlUpSCilMFobLSfs4e-XQgi774a-XDPsFOjMZlL-ALwPVcw</addsrcrecordid><sourcetype>Publisher</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype></control><display><type>conference_proceeding</type><title>Low-Cost Multicystalline Silicon Wafers by Purifying Metallurgical Grade Silicon with Tin Solution</title><source>IEEE Electronic Library (IEL) Conference Proceedings</source><creator>Yuepeng Wan ; Raghavan, P.S. ; Chartier, C. ; Talbott, J. ; Khattak, C.</creator><creatorcontrib>Yuepeng Wan ; Raghavan, P.S. ; Chartier, C. ; Talbott, J. ; Khattak, C.</creatorcontrib><description>The PV industry is currently facing serious difficulty in finding silicon feedstock to shore up their expansion plan to meet the rapid growth of the solar cell market. The work reported here is an effort to tackle the severe problem of silicon shortage for PV industry, and to bring down the cost for solar wafer production. A single-step process of producing silicon wafers directly from metallurgical grade silicon (MGSi) is being developed in GT Equipment Technologies, Inc (GTi). In this process, tin is used as a solvent to dissolve both silicon and impurities in the MGSi, and to retain most of the impurities during silicon crystallization. By applying the shaped crystal growth technology, silicon ribbons are pulled out of the Si-Sn melt. The thin silicon ribbons can be used directly as solar wafers. The final goal of this project is to obtain silicon ribbon that can be used directly as wafers for solar cells with targeting efficiency of no less than 14%. The preliminary objectives of the current research phase is to obtain 2" wide silicon ribbons, to analyze the purity of the grown ribbons, to characterize the electrical properties of the ribbon, and to develop a prototype puller for growing 5 to 6 inch wide silicon ribbons out of the Si-Sn solution. The experimental work on the single-step silicon wafer from MG-Si so far has demonstrated that silicon ribbons can be pulled from the MG-Si and Sn solution. Significant reduction of concentration in the grown ribbons has been observed for most of the metallic impurities. The reduction effect results from partitioning of impurities into tin. However, the reduction of both boron and phosphorus is not significant. Also, the obtained samples contain large amount of tin (several hundred ppm to 1%). The measured lifetime of the obtained wafer is still low (0.1 to 1.0 microsecond). Further reduction in boron and phosphorus level is required and the effect the tin inclusion needs to be investigated</description><identifier>ISSN: 0160-8371</identifier><identifier>ISBN: 1424400163</identifier><identifier>ISBN: 9781424400164</identifier><identifier>EISBN: 1424400171</identifier><identifier>EISBN: 9781424400171</identifier><identifier>DOI: 10.1109/WCPEC.2006.279679</identifier><language>eng</language><publisher>IEEE</publisher><subject>Boron ; Costs ; Crystallization ; Impurities ; Photovoltaic cells ; Production ; Prototypes ; Silicon ; Solvents ; Tin</subject><ispartof>2006 IEEE 4th World Conference on Photovoltaic Energy Conference, 2006, Vol.2, p.1342-1345</ispartof><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/4059893$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>309,310,778,782,787,788,2054,27908,54903</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/4059893$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc></links><search><creatorcontrib>Yuepeng Wan</creatorcontrib><creatorcontrib>Raghavan, P.S.</creatorcontrib><creatorcontrib>Chartier, C.</creatorcontrib><creatorcontrib>Talbott, J.</creatorcontrib><creatorcontrib>Khattak, C.</creatorcontrib><title>Low-Cost Multicystalline Silicon Wafers by Purifying Metallurgical Grade Silicon with Tin Solution</title><title>2006 IEEE 4th World Conference on Photovoltaic Energy Conference</title><addtitle>WCPEC</addtitle><description>The PV industry is currently facing serious difficulty in finding silicon feedstock to shore up their expansion plan to meet the rapid growth of the solar cell market. The work reported here is an effort to tackle the severe problem of silicon shortage for PV industry, and to bring down the cost for solar wafer production. A single-step process of producing silicon wafers directly from metallurgical grade silicon (MGSi) is being developed in GT Equipment Technologies, Inc (GTi). In this process, tin is used as a solvent to dissolve both silicon and impurities in the MGSi, and to retain most of the impurities during silicon crystallization. By applying the shaped crystal growth technology, silicon ribbons are pulled out of the Si-Sn melt. The thin silicon ribbons can be used directly as solar wafers. The final goal of this project is to obtain silicon ribbon that can be used directly as wafers for solar cells with targeting efficiency of no less than 14%. The preliminary objectives of the current research phase is to obtain 2" wide silicon ribbons, to analyze the purity of the grown ribbons, to characterize the electrical properties of the ribbon, and to develop a prototype puller for growing 5 to 6 inch wide silicon ribbons out of the Si-Sn solution. The experimental work on the single-step silicon wafer from MG-Si so far has demonstrated that silicon ribbons can be pulled from the MG-Si and Sn solution. Significant reduction of concentration in the grown ribbons has been observed for most of the metallic impurities. The reduction effect results from partitioning of impurities into tin. However, the reduction of both boron and phosphorus is not significant. Also, the obtained samples contain large amount of tin (several hundred ppm to 1%). The measured lifetime of the obtained wafer is still low (0.1 to 1.0 microsecond). Further reduction in boron and phosphorus level is required and the effect the tin inclusion needs to be investigated</description><subject>Boron</subject><subject>Costs</subject><subject>Crystallization</subject><subject>Impurities</subject><subject>Photovoltaic cells</subject><subject>Production</subject><subject>Prototypes</subject><subject>Silicon</subject><subject>Solvents</subject><subject>Tin</subject><issn>0160-8371</issn><isbn>1424400163</isbn><isbn>9781424400164</isbn><isbn>1424400171</isbn><isbn>9781424400171</isbn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>2006</creationdate><recordtype>conference_proceeding</recordtype><sourceid>6IE</sourceid><sourceid>RIE</sourceid><recordid>eNpFzNtKw0AUheERFWyrDyDezAuk7j2HzORSQq1Ci4VWelkm00ndMiaSAyVvb0WhVx8LfhZj9whTRMget_lqlk8FQDoVJktNdsHGqIRSAGjw8jxSecVGJyCx0uANG7ftJ4AAmeKIFYv6mOR12_FlHzvyQ9u5GKkKfE2RfF3xrStD0_Ji4Ku-oXKg6sCX4bfqmwN5F_m8cftzf6Tug2-o4us69h3V1S27Ll1sw92_E_b-PNvkL8nibf6aPy0SQqO7xANasA4KocFLf0K4QlulFRYafQYK91YKqQIoe2r2LlUpSCilMFobLSfs4e-XQgi774a-XDPsFOjMZlL-ALwPVcw</recordid><startdate>200605</startdate><enddate>200605</enddate><creator>Yuepeng Wan</creator><creator>Raghavan, P.S.</creator><creator>Chartier, C.</creator><creator>Talbott, J.</creator><creator>Khattak, C.</creator><general>IEEE</general><scope>6IE</scope><scope>6IH</scope><scope>CBEJK</scope><scope>RIE</scope><scope>RIO</scope></search><sort><creationdate>200605</creationdate><title>Low-Cost Multicystalline Silicon Wafers by Purifying Metallurgical Grade Silicon with Tin Solution</title><author>Yuepeng Wan ; Raghavan, P.S. ; Chartier, C. ; Talbott, J. ; Khattak, C.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-i175t-c01808a0b250c3cb252ab584541b51c9041d83234e048250da646030f32755753</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>2006</creationdate><topic>Boron</topic><topic>Costs</topic><topic>Crystallization</topic><topic>Impurities</topic><topic>Photovoltaic cells</topic><topic>Production</topic><topic>Prototypes</topic><topic>Silicon</topic><topic>Solvents</topic><topic>Tin</topic><toplevel>online_resources</toplevel><creatorcontrib>Yuepeng Wan</creatorcontrib><creatorcontrib>Raghavan, P.S.</creatorcontrib><creatorcontrib>Chartier, C.</creatorcontrib><creatorcontrib>Talbott, J.</creatorcontrib><creatorcontrib>Khattak, C.</creatorcontrib><collection>IEEE Electronic Library (IEL) Conference Proceedings</collection><collection>IEEE Proceedings Order Plan (POP) 1998-present by volume</collection><collection>IEEE Xplore All Conference Proceedings</collection><collection>IEEE Electronic Library (IEL)</collection><collection>IEEE Proceedings Order Plans (POP) 1998-present</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Yuepeng Wan</au><au>Raghavan, P.S.</au><au>Chartier, C.</au><au>Talbott, J.</au><au>Khattak, C.</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>Low-Cost Multicystalline Silicon Wafers by Purifying Metallurgical Grade Silicon with Tin Solution</atitle><btitle>2006 IEEE 4th World Conference on Photovoltaic Energy Conference</btitle><stitle>WCPEC</stitle><date>2006-05</date><risdate>2006</risdate><volume>2</volume><spage>1342</spage><epage>1345</epage><pages>1342-1345</pages><issn>0160-8371</issn><isbn>1424400163</isbn><isbn>9781424400164</isbn><eisbn>1424400171</eisbn><eisbn>9781424400171</eisbn><abstract>The PV industry is currently facing serious difficulty in finding silicon feedstock to shore up their expansion plan to meet the rapid growth of the solar cell market. The work reported here is an effort to tackle the severe problem of silicon shortage for PV industry, and to bring down the cost for solar wafer production. A single-step process of producing silicon wafers directly from metallurgical grade silicon (MGSi) is being developed in GT Equipment Technologies, Inc (GTi). In this process, tin is used as a solvent to dissolve both silicon and impurities in the MGSi, and to retain most of the impurities during silicon crystallization. By applying the shaped crystal growth technology, silicon ribbons are pulled out of the Si-Sn melt. The thin silicon ribbons can be used directly as solar wafers. The final goal of this project is to obtain silicon ribbon that can be used directly as wafers for solar cells with targeting efficiency of no less than 14%. The preliminary objectives of the current research phase is to obtain 2" wide silicon ribbons, to analyze the purity of the grown ribbons, to characterize the electrical properties of the ribbon, and to develop a prototype puller for growing 5 to 6 inch wide silicon ribbons out of the Si-Sn solution. The experimental work on the single-step silicon wafer from MG-Si so far has demonstrated that silicon ribbons can be pulled from the MG-Si and Sn solution. Significant reduction of concentration in the grown ribbons has been observed for most of the metallic impurities. The reduction effect results from partitioning of impurities into tin. However, the reduction of both boron and phosphorus is not significant. Also, the obtained samples contain large amount of tin (several hundred ppm to 1%). The measured lifetime of the obtained wafer is still low (0.1 to 1.0 microsecond). Further reduction in boron and phosphorus level is required and the effect the tin inclusion needs to be investigated</abstract><pub>IEEE</pub><doi>10.1109/WCPEC.2006.279679</doi><tpages>4</tpages></addata></record>
fulltext fulltext_linktorsrc
identifier ISSN: 0160-8371
ispartof 2006 IEEE 4th World Conference on Photovoltaic Energy Conference, 2006, Vol.2, p.1342-1345
issn 0160-8371
language eng
recordid cdi_ieee_primary_4059893
source IEEE Electronic Library (IEL) Conference Proceedings
subjects Boron
Costs
Crystallization
Impurities
Photovoltaic cells
Production
Prototypes
Silicon
Solvents
Tin
title Low-Cost Multicystalline Silicon Wafers by Purifying Metallurgical Grade Silicon with Tin Solution
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-17T00%3A21%3A09IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-ieee_6IE&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=Low-Cost%20Multicystalline%20Silicon%20Wafers%20by%20Purifying%20Metallurgical%20Grade%20Silicon%20with%20Tin%20Solution&rft.btitle=2006%20IEEE%204th%20World%20Conference%20on%20Photovoltaic%20Energy%20Conference&rft.au=Yuepeng%20Wan&rft.date=2006-05&rft.volume=2&rft.spage=1342&rft.epage=1345&rft.pages=1342-1345&rft.issn=0160-8371&rft.isbn=1424400163&rft.isbn_list=9781424400164&rft_id=info:doi/10.1109/WCPEC.2006.279679&rft_dat=%3Cieee_6IE%3E4059893%3C/ieee_6IE%3E%3Curl%3E%3C/url%3E&rft.eisbn=1424400171&rft.eisbn_list=9781424400171&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_ieee_id=4059893&rfr_iscdi=true