The influencing of the surface structure on the emission properties of the Sc-Ba dispensed cathodes

The researches were carried out in UHV chamber and the pressure of residual gases did not exceed 5/spl middot/10-9 torr. The structure of the cathodes surface was investigated by the Auger electron spectroscopy (AES). The measurement of emission properties of cathodes was made in a flat diode system...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Bekh, L.I., Il'chenko, V.V., Lushkin, A.E.
Format: Tagungsbericht
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The researches were carried out in UHV chamber and the pressure of residual gases did not exceed 5/spl middot/10-9 torr. The structure of the cathodes surface was investigated by the Auger electron spectroscopy (AES). The measurement of emission properties of cathodes was made in a flat diode system in a pulse mode. The anode was the molybdenum plate (2/spl times/2/spl times/0.2 mm.), which was heating to the high temperature by the electron impact. Spacing interval the cathode-anode was equal to 1 mm and has been carefully controlled. Pulse duration of the anodic voltage is 4 /spl mu/s. The amplitude of anodic voltage can change up to 5 kV. A work function of the samples was calculated by the method of a full current.
DOI:10.1109/IVESC.2004.1414192