High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation
INCONEL alloy 718 is a high-strength; corrosion-resistant nickel chromium material used at -253 °C to 705 °C for production of heat resistant parts of aero jet engine mostly. The fatigue test provided on this kind materials were done via low frequency loading up to this time. Nowadays, needs of resu...
Gespeichert in:
| Veröffentlicht in: | Metalurgija 2015-01, Vol.54 (1), p.59 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | 1 |
| container_start_page | 59 |
| container_title | Metalurgija |
| container_volume | 54 |
| creator | Belan, J |
| description | INCONEL alloy 718 is a high-strength; corrosion-resistant nickel chromium material used at -253 °C to 705 °C for production of heat resistant parts of aero jet engine mostly. The fatigue test provided on this kind materials were done via low frequency loading up to this time. Nowadays, needs of results at higher volume of loading cycles leads to high frequency loading with aim to shorten testing time. Fatigue test of experimental material was carried out at frequency 20 kHz with stress ration R = - 1 (push – pull) at room temperature. It was found that this superalloy can still fracture after exceeding 108 cycles. Besides fatigue test were microstructural characterisation and scanning electron microscopy (SEM) fractography evaluation done. |
| format | Article |
| fullrecord | <record><control><sourceid>hrcak</sourceid><recordid>TN_cdi_hrcak_primary_oai_hrcak_srce_hr_126674</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>oai_hrcak_srce_hr_126674</sourcerecordid><originalsourceid>FETCH-hrcak_primary_oai_hrcak_srce_hr_1266743</originalsourceid><addsrcrecordid>eNqVjE0OgjAUhBujifhzh3cBErBA2RuNbly5ckNeaoEqUH1tTdh5B2_oSSTRC7iayZf5ZsSCmPMkXKUiG7MgShMepnmSTdnM2ksUpYLnImCnna5qKEndvepkDyU6XXkFTlkHpoT9AUScAzaN6eH9fEGrJRnryEvnSQF258FG6UxFeKt7UA9s_HBiugWblNhYtfzlnIXbzXG9C2uSeC1upFukvjCoiy-xJNVQi3iVZSLh_-4_mS9N0g</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation</title><source>DOAJ Directory of Open Access Journals</source><source>EZB-FREE-00999 freely available EZB journals</source><creator>Belan, J</creator><creatorcontrib>Belan, J</creatorcontrib><description>INCONEL alloy 718 is a high-strength; corrosion-resistant nickel chromium material used at -253 °C to 705 °C for production of heat resistant parts of aero jet engine mostly. The fatigue test provided on this kind materials were done via low frequency loading up to this time. Nowadays, needs of results at higher volume of loading cycles leads to high frequency loading with aim to shorten testing time. Fatigue test of experimental material was carried out at frequency 20 kHz with stress ration R = - 1 (push – pull) at room temperature. It was found that this superalloy can still fracture after exceeding 108 cycles. Besides fatigue test were microstructural characterisation and scanning electron microscopy (SEM) fractography evaluation done.</description><identifier>ISSN: 0543-5846</identifier><identifier>EISSN: 1334-2576</identifier><language>eng</language><publisher>Hrvatsko Metalursko Društvo (HMD)</publisher><subject>high frequency fatigue testing ; microstructure ; Ni – base superalloy ; SEM fractography</subject><ispartof>Metalurgija, 2015-01, Vol.54 (1), p.59</ispartof><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Uhttps://hrcak.srce.hr/logo_broj/10276.jpg</thumbnail><link.rule.ids>230,780,784,885</link.rule.ids></links><search><creatorcontrib>Belan, J</creatorcontrib><title>High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation</title><title>Metalurgija</title><description>INCONEL alloy 718 is a high-strength; corrosion-resistant nickel chromium material used at -253 °C to 705 °C for production of heat resistant parts of aero jet engine mostly. The fatigue test provided on this kind materials were done via low frequency loading up to this time. Nowadays, needs of results at higher volume of loading cycles leads to high frequency loading with aim to shorten testing time. Fatigue test of experimental material was carried out at frequency 20 kHz with stress ration R = - 1 (push – pull) at room temperature. It was found that this superalloy can still fracture after exceeding 108 cycles. Besides fatigue test were microstructural characterisation and scanning electron microscopy (SEM) fractography evaluation done.</description><subject>high frequency fatigue testing</subject><subject>microstructure</subject><subject>Ni – base superalloy</subject><subject>SEM fractography</subject><issn>0543-5846</issn><issn>1334-2576</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2015</creationdate><recordtype>article</recordtype><recordid>eNqVjE0OgjAUhBujifhzh3cBErBA2RuNbly5ckNeaoEqUH1tTdh5B2_oSSTRC7iayZf5ZsSCmPMkXKUiG7MgShMepnmSTdnM2ksUpYLnImCnna5qKEndvepkDyU6XXkFTlkHpoT9AUScAzaN6eH9fEGrJRnryEvnSQF258FG6UxFeKt7UA9s_HBiugWblNhYtfzlnIXbzXG9C2uSeC1upFukvjCoiy-xJNVQi3iVZSLh_-4_mS9N0g</recordid><startdate>20150101</startdate><enddate>20150101</enddate><creator>Belan, J</creator><general>Hrvatsko Metalursko Društvo (HMD)</general><scope>VP8</scope></search><sort><creationdate>20150101</creationdate><title>High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation</title><author>Belan, J</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-hrcak_primary_oai_hrcak_srce_hr_1266743</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2015</creationdate><topic>high frequency fatigue testing</topic><topic>microstructure</topic><topic>Ni – base superalloy</topic><topic>SEM fractography</topic><toplevel>online_resources</toplevel><creatorcontrib>Belan, J</creatorcontrib><collection>Hrcak: Portal of scientific journals of Croatia</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Belan, J</au><format>book</format><genre>document</genre><ristype>GEN</ristype><atitle>High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation</atitle><jtitle>Metalurgija</jtitle><date>2015-01-01</date><risdate>2015</risdate><volume>54</volume><issue>1</issue><spage>59</spage><pages>59-</pages><issn>0543-5846</issn><eissn>1334-2576</eissn><abstract>INCONEL alloy 718 is a high-strength; corrosion-resistant nickel chromium material used at -253 °C to 705 °C for production of heat resistant parts of aero jet engine mostly. The fatigue test provided on this kind materials were done via low frequency loading up to this time. Nowadays, needs of results at higher volume of loading cycles leads to high frequency loading with aim to shorten testing time. Fatigue test of experimental material was carried out at frequency 20 kHz with stress ration R = - 1 (push – pull) at room temperature. It was found that this superalloy can still fracture after exceeding 108 cycles. Besides fatigue test were microstructural characterisation and scanning electron microscopy (SEM) fractography evaluation done.</abstract><pub>Hrvatsko Metalursko Društvo (HMD)</pub><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0543-5846 |
| ispartof | Metalurgija, 2015-01, Vol.54 (1), p.59 |
| issn | 0543-5846 1334-2576 |
| language | eng |
| recordid | cdi_hrcak_primary_oai_hrcak_srce_hr_126674 |
| source | DOAJ Directory of Open Access Journals; EZB-FREE-00999 freely available EZB journals |
| subjects | high frequency fatigue testing microstructure Ni – base superalloy SEM fractography |
| title | High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-23T20%3A44%3A53IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-hrcak&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=document&rft.atitle=High%20frequency%20fatigue%20test%20of%20IN%20718%20alloy%20%E2%80%93%20microstructure%20and%20fractography%20evaluation&rft.jtitle=Metalurgija&rft.au=Belan,%20J&rft.date=2015-01-01&rft.volume=54&rft.issue=1&rft.spage=59&rft.pages=59-&rft.issn=0543-5846&rft.eissn=1334-2576&rft_id=info:doi/&rft_dat=%3Chrcak%3Eoai_hrcak_srce_hr_126674%3C/hrcak%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |