An innovative method for measuring the convective cooling of photovoltaic modules

The temperature of photovoltaic (PV) cells is a critical factor in evaluating energy yield and predicting system degradation. Although thermo-electrical models allows predicting the evolution of the system over time, precise understanding of the thermal exchanges between the system and its environme...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Solar energy 2024-05, Vol.274, p.112531, Article 112531
Hauptverfasser: Amiot, Baptiste, Pabiou, Hervé, Le Berre, Rémi, Giroux–Julien, Stéphanie
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue
container_start_page 112531
container_title Solar energy
container_volume 274
creator Amiot, Baptiste
Pabiou, Hervé
Le Berre, Rémi
Giroux–Julien, Stéphanie
description The temperature of photovoltaic (PV) cells is a critical factor in evaluating energy yield and predicting system degradation. Although thermo-electrical models allows predicting the evolution of the system over time, precise understanding of the thermal exchanges between the system and its environment is needed as they are implemented in the yield assessment using thermal correlations. These empirical correlations are based on heat transfer magnitudes undergone by similar PV set-ups. The aim of this study is to introduce a non-intrusive experimental methodology for precisely determining the convective heat transfer coefficient (CHTC) at the front of photovoltaic modules using two setups. The method integrates a heat flux sensor glued to the PV surface coupled with environmental data (e.g., irradiance, ambient temperature). This experimental method is applied to PV modules on a roof in an urban area and to a floating photovoltaic (FPV) system. It is demonstrated that the method significantly improves the accuracy of prediction of PV module temperatures in operating conditions compared to the conventional method based on the energy balance of a PV module. By using quantile regression, an empirical forced convection correlation is found based on the average wind speed. Compared to the traditional approach which relies on global transmittance, the CHTC is mainly dependent on the wind, whereas the global transmittance includes the radiative heat transfer which depends on the module temperature. The correlation for CHTC tailored for the floating photovoltaic system shows sensitivity to wind speed that is slightly higher compared to the inland setup in the literature. •Convective Heat Transfer Coefficient (CHTC) is determined using heat flux sensor.•Measured CHCTs for photovoltaics (PV) are robust to varying environmental conditions.•Quantile regressions are used to identify CHTC sensitivity to wind speed.•Regressions of global transmittance against wind speed is influenced by irradiations.•Measured CHTC is less impacted by irradiations, improving the analysis of convection.•Predictions of PV temperatures are enhanced using measured CHTCs.•A new empirical correlation for convective transfers in Floating PV is provided.
doi_str_mv 10.1016/j.solener.2024.112531
format Article
fullrecord <record><control><sourceid>hal_cross</sourceid><recordid>TN_cdi_hal_primary_oai_HAL_hal_04582898v1</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0038092X24002251</els_id><sourcerecordid>oai_HAL_hal_04582898v1</sourcerecordid><originalsourceid>FETCH-LOGICAL-c338t-5c3f75e4e74e9aedbcff6a90ce9bd25befe07677939e47ef8ff6462d14c98ab43</originalsourceid><addsrcrecordid>eNqFkF9LwzAUxYMoOKcfQeirD61JmzbJk4yhThiIoOBbSNMbm9E1I-kKfntTO3z16f4758D9IXRLcEYwqe53WXAd9OCzHOc0IyQvC3KGFoQyksaBnaMFxgVPscg_L9FVCDuMCSOcLdDbqk9s37tRDXaEZA9D65rEOB9bFY7e9l_J0EKiXT-C_tVo57pp7UxyaN3gRtcNyupk75pjB-EaXRjVBbg51SX6eHp8X2_S7evzy3q1TXVR8CEtdWFYCRQYBaGgqbUxlRJYg6ibvKzBAGYVY6IQQBkYHs-0yhtCteCqpsUS3c25rerkwdu98t_SKSs3q62cdpiWPOeCjyRqy1mrvQvBg_kzECwnhnInTwzlxFDODKPvYfZBfGS08Rq0hV5DY32kIRtn_0n4AWd-fzk</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>An innovative method for measuring the convective cooling of photovoltaic modules</title><source>ScienceDirect Journals (5 years ago - present)</source><creator>Amiot, Baptiste ; Pabiou, Hervé ; Le Berre, Rémi ; Giroux–Julien, Stéphanie</creator><creatorcontrib>Amiot, Baptiste ; Pabiou, Hervé ; Le Berre, Rémi ; Giroux–Julien, Stéphanie</creatorcontrib><description>The temperature of photovoltaic (PV) cells is a critical factor in evaluating energy yield and predicting system degradation. Although thermo-electrical models allows predicting the evolution of the system over time, precise understanding of the thermal exchanges between the system and its environment is needed as they are implemented in the yield assessment using thermal correlations. These empirical correlations are based on heat transfer magnitudes undergone by similar PV set-ups. The aim of this study is to introduce a non-intrusive experimental methodology for precisely determining the convective heat transfer coefficient (CHTC) at the front of photovoltaic modules using two setups. The method integrates a heat flux sensor glued to the PV surface coupled with environmental data (e.g., irradiance, ambient temperature). This experimental method is applied to PV modules on a roof in an urban area and to a floating photovoltaic (FPV) system. It is demonstrated that the method significantly improves the accuracy of prediction of PV module temperatures in operating conditions compared to the conventional method based on the energy balance of a PV module. By using quantile regression, an empirical forced convection correlation is found based on the average wind speed. Compared to the traditional approach which relies on global transmittance, the CHTC is mainly dependent on the wind, whereas the global transmittance includes the radiative heat transfer which depends on the module temperature. The correlation for CHTC tailored for the floating photovoltaic system shows sensitivity to wind speed that is slightly higher compared to the inland setup in the literature. •Convective Heat Transfer Coefficient (CHTC) is determined using heat flux sensor.•Measured CHCTs for photovoltaics (PV) are robust to varying environmental conditions.•Quantile regressions are used to identify CHTC sensitivity to wind speed.•Regressions of global transmittance against wind speed is influenced by irradiations.•Measured CHTC is less impacted by irradiations, improving the analysis of convection.•Predictions of PV temperatures are enhanced using measured CHTCs.•A new empirical correlation for convective transfers in Floating PV is provided.</description><identifier>ISSN: 0038-092X</identifier><identifier>EISSN: 1471-1257</identifier><identifier>DOI: 10.1016/j.solener.2024.112531</identifier><language>eng</language><publisher>Elsevier Ltd</publisher><subject>Convective heat transfer ; Engineering Sciences ; Experimental ; Floating photovoltaics ; Heat flux sensor ; Mechanics ; Thermics</subject><ispartof>Solar energy, 2024-05, Vol.274, p.112531, Article 112531</ispartof><rights>2024 The Author(s)</rights><rights>Attribution</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c338t-5c3f75e4e74e9aedbcff6a90ce9bd25befe07677939e47ef8ff6462d14c98ab43</cites><orcidid>0000-0002-0587-6365 ; 0000-0001-9242-6276 ; 0009-0005-4636-4306</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.solener.2024.112531$$EHTML$$P50$$Gelsevier$$Hfree_for_read</linktohtml><link.rule.ids>230,314,780,784,885,3550,27924,27925,45995</link.rule.ids><backlink>$$Uhttps://hal.science/hal-04582898$$DView record in HAL$$Hfree_for_read</backlink></links><search><creatorcontrib>Amiot, Baptiste</creatorcontrib><creatorcontrib>Pabiou, Hervé</creatorcontrib><creatorcontrib>Le Berre, Rémi</creatorcontrib><creatorcontrib>Giroux–Julien, Stéphanie</creatorcontrib><title>An innovative method for measuring the convective cooling of photovoltaic modules</title><title>Solar energy</title><description>The temperature of photovoltaic (PV) cells is a critical factor in evaluating energy yield and predicting system degradation. Although thermo-electrical models allows predicting the evolution of the system over time, precise understanding of the thermal exchanges between the system and its environment is needed as they are implemented in the yield assessment using thermal correlations. These empirical correlations are based on heat transfer magnitudes undergone by similar PV set-ups. The aim of this study is to introduce a non-intrusive experimental methodology for precisely determining the convective heat transfer coefficient (CHTC) at the front of photovoltaic modules using two setups. The method integrates a heat flux sensor glued to the PV surface coupled with environmental data (e.g., irradiance, ambient temperature). This experimental method is applied to PV modules on a roof in an urban area and to a floating photovoltaic (FPV) system. It is demonstrated that the method significantly improves the accuracy of prediction of PV module temperatures in operating conditions compared to the conventional method based on the energy balance of a PV module. By using quantile regression, an empirical forced convection correlation is found based on the average wind speed. Compared to the traditional approach which relies on global transmittance, the CHTC is mainly dependent on the wind, whereas the global transmittance includes the radiative heat transfer which depends on the module temperature. The correlation for CHTC tailored for the floating photovoltaic system shows sensitivity to wind speed that is slightly higher compared to the inland setup in the literature. •Convective Heat Transfer Coefficient (CHTC) is determined using heat flux sensor.•Measured CHCTs for photovoltaics (PV) are robust to varying environmental conditions.•Quantile regressions are used to identify CHTC sensitivity to wind speed.•Regressions of global transmittance against wind speed is influenced by irradiations.•Measured CHTC is less impacted by irradiations, improving the analysis of convection.•Predictions of PV temperatures are enhanced using measured CHTCs.•A new empirical correlation for convective transfers in Floating PV is provided.</description><subject>Convective heat transfer</subject><subject>Engineering Sciences</subject><subject>Experimental</subject><subject>Floating photovoltaics</subject><subject>Heat flux sensor</subject><subject>Mechanics</subject><subject>Thermics</subject><issn>0038-092X</issn><issn>1471-1257</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2024</creationdate><recordtype>article</recordtype><recordid>eNqFkF9LwzAUxYMoOKcfQeirD61JmzbJk4yhThiIoOBbSNMbm9E1I-kKfntTO3z16f4758D9IXRLcEYwqe53WXAd9OCzHOc0IyQvC3KGFoQyksaBnaMFxgVPscg_L9FVCDuMCSOcLdDbqk9s37tRDXaEZA9D65rEOB9bFY7e9l_J0EKiXT-C_tVo57pp7UxyaN3gRtcNyupk75pjB-EaXRjVBbg51SX6eHp8X2_S7evzy3q1TXVR8CEtdWFYCRQYBaGgqbUxlRJYg6ibvKzBAGYVY6IQQBkYHs-0yhtCteCqpsUS3c25rerkwdu98t_SKSs3q62cdpiWPOeCjyRqy1mrvQvBg_kzECwnhnInTwzlxFDODKPvYfZBfGS08Rq0hV5DY32kIRtn_0n4AWd-fzk</recordid><startdate>20240515</startdate><enddate>20240515</enddate><creator>Amiot, Baptiste</creator><creator>Pabiou, Hervé</creator><creator>Le Berre, Rémi</creator><creator>Giroux–Julien, Stéphanie</creator><general>Elsevier Ltd</general><general>Elsevier</general><scope>6I.</scope><scope>AAFTH</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>1XC</scope><scope>VOOES</scope><orcidid>https://orcid.org/0000-0002-0587-6365</orcidid><orcidid>https://orcid.org/0000-0001-9242-6276</orcidid><orcidid>https://orcid.org/0009-0005-4636-4306</orcidid></search><sort><creationdate>20240515</creationdate><title>An innovative method for measuring the convective cooling of photovoltaic modules</title><author>Amiot, Baptiste ; Pabiou, Hervé ; Le Berre, Rémi ; Giroux–Julien, Stéphanie</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c338t-5c3f75e4e74e9aedbcff6a90ce9bd25befe07677939e47ef8ff6462d14c98ab43</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2024</creationdate><topic>Convective heat transfer</topic><topic>Engineering Sciences</topic><topic>Experimental</topic><topic>Floating photovoltaics</topic><topic>Heat flux sensor</topic><topic>Mechanics</topic><topic>Thermics</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Amiot, Baptiste</creatorcontrib><creatorcontrib>Pabiou, Hervé</creatorcontrib><creatorcontrib>Le Berre, Rémi</creatorcontrib><creatorcontrib>Giroux–Julien, Stéphanie</creatorcontrib><collection>ScienceDirect Open Access Titles</collection><collection>Elsevier:ScienceDirect:Open Access</collection><collection>CrossRef</collection><collection>Hyper Article en Ligne (HAL)</collection><collection>Hyper Article en Ligne (HAL) (Open Access)</collection><jtitle>Solar energy</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Amiot, Baptiste</au><au>Pabiou, Hervé</au><au>Le Berre, Rémi</au><au>Giroux–Julien, Stéphanie</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>An innovative method for measuring the convective cooling of photovoltaic modules</atitle><jtitle>Solar energy</jtitle><date>2024-05-15</date><risdate>2024</risdate><volume>274</volume><spage>112531</spage><pages>112531-</pages><artnum>112531</artnum><issn>0038-092X</issn><eissn>1471-1257</eissn><abstract>The temperature of photovoltaic (PV) cells is a critical factor in evaluating energy yield and predicting system degradation. Although thermo-electrical models allows predicting the evolution of the system over time, precise understanding of the thermal exchanges between the system and its environment is needed as they are implemented in the yield assessment using thermal correlations. These empirical correlations are based on heat transfer magnitudes undergone by similar PV set-ups. The aim of this study is to introduce a non-intrusive experimental methodology for precisely determining the convective heat transfer coefficient (CHTC) at the front of photovoltaic modules using two setups. The method integrates a heat flux sensor glued to the PV surface coupled with environmental data (e.g., irradiance, ambient temperature). This experimental method is applied to PV modules on a roof in an urban area and to a floating photovoltaic (FPV) system. It is demonstrated that the method significantly improves the accuracy of prediction of PV module temperatures in operating conditions compared to the conventional method based on the energy balance of a PV module. By using quantile regression, an empirical forced convection correlation is found based on the average wind speed. Compared to the traditional approach which relies on global transmittance, the CHTC is mainly dependent on the wind, whereas the global transmittance includes the radiative heat transfer which depends on the module temperature. The correlation for CHTC tailored for the floating photovoltaic system shows sensitivity to wind speed that is slightly higher compared to the inland setup in the literature. •Convective Heat Transfer Coefficient (CHTC) is determined using heat flux sensor.•Measured CHCTs for photovoltaics (PV) are robust to varying environmental conditions.•Quantile regressions are used to identify CHTC sensitivity to wind speed.•Regressions of global transmittance against wind speed is influenced by irradiations.•Measured CHTC is less impacted by irradiations, improving the analysis of convection.•Predictions of PV temperatures are enhanced using measured CHTCs.•A new empirical correlation for convective transfers in Floating PV is provided.</abstract><pub>Elsevier Ltd</pub><doi>10.1016/j.solener.2024.112531</doi><orcidid>https://orcid.org/0000-0002-0587-6365</orcidid><orcidid>https://orcid.org/0000-0001-9242-6276</orcidid><orcidid>https://orcid.org/0009-0005-4636-4306</orcidid><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 0038-092X
ispartof Solar energy, 2024-05, Vol.274, p.112531, Article 112531
issn 0038-092X
1471-1257
language eng
recordid cdi_hal_primary_oai_HAL_hal_04582898v1
source ScienceDirect Journals (5 years ago - present)
subjects Convective heat transfer
Engineering Sciences
Experimental
Floating photovoltaics
Heat flux sensor
Mechanics
Thermics
title An innovative method for measuring the convective cooling of photovoltaic modules
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-06T12%3A50%3A02IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-hal_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=An%20innovative%20method%20for%20measuring%20the%20convective%20cooling%20of%20photovoltaic%20modules&rft.jtitle=Solar%20energy&rft.au=Amiot,%20Baptiste&rft.date=2024-05-15&rft.volume=274&rft.spage=112531&rft.pages=112531-&rft.artnum=112531&rft.issn=0038-092X&rft.eissn=1471-1257&rft_id=info:doi/10.1016/j.solener.2024.112531&rft_dat=%3Chal_cross%3Eoai_HAL_hal_04582898v1%3C/hal_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_els_id=S0038092X24002251&rfr_iscdi=true