Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method
This work focuses on the local heat fluxes on a disc during braking conditions. The generated heat and the temperature field are identified using an inverse heat conduction method coupled to temperature measurements inside the disc. Function specification is used to estimate the boundary conditions...
Gespeichert in:
| Veröffentlicht in: | Applied thermal engineering 2012-12, Vol.48, p.202-210 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 210 |
|---|---|
| container_issue | |
| container_start_page | 202 |
| container_title | Applied thermal engineering |
| container_volume | 48 |
| creator | Meresse, D. Harmand, S. Siroux, M. Watremez, M. Dubar, L. |
| description | This work focuses on the local heat fluxes on a disc during braking conditions. The generated heat and the temperature field are identified using an inverse heat conduction method coupled to temperature measurements inside the disc. Function specification is used to estimate the boundary conditions in the model without any prior information on the flux intensity and the evolution regarding the time and the position on the sliding surface. Disc heat flux identifications are performed for different braking conditions (sliding speed and normal pressure) on a High-Speed Tribometer. The temperature values are obtained using a telemetry system that allows inductive data transfer. The influence of the braking conditions on the heat repartition and the surface temperature is discussed.
► The disc local heat fluxes are calculated in braking conditions. ► Experimental temperatures are measured inside the disc using a telemetry device. ► A 2D inverse method allows for the identification of heat fluxes from measurements. ► A pressure influence on the heat repartition is highlighted. |
| doi_str_mv | 10.1016/j.applthermaleng.2012.04.033 |
| format | Article |
| fullrecord | <record><control><sourceid>hal_cross</sourceid><recordid>TN_cdi_hal_primary_oai_HAL_hal_02367753v1</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S1359431112002761</els_id><sourcerecordid>oai_HAL_hal_02367753v1</sourcerecordid><originalsourceid>FETCH-LOGICAL-c448t-34a91a30ac8e2b5524f81312641790ab9fea46cd476bb52203067b7a36ca4bfd3</originalsourceid><addsrcrecordid>eNqNkE9LxDAQxYsoqKvfIQc9eGjNvyZd8CLiusKCFz2HaTrdzdptS9Jd9NubWhG8CYFkhvfeZH5JcsVoxihTt9sM-r4ZNuh30GC7zjhlPKMyo0IcJWes0CLNFVXH8S3yeSoFY6fJeQhbGoWFlmfJ_vGjR-922A7QkMoFSzYIA6mb_QdxVWy72lkYXNeSeIB4rPYWKxJsHElKD--uXZPwGQbckX0Yi_gh4toD-oBTmO3aaPrO2OGw6aqL5KSGJuDlzz1L3haPrw_LdPXy9Pxwv0qtlMWQCglzBoKCLZCXec5lXTDBuJJMzymU8xpBKltJrcoy55wKqnSpQSgLsqwrMUtuptwNNKaPa4L_NB04s7xfmbFHuVBa5-LAovZu0lrfheCx_jUwakbcZmv-4jYjbkOlibij_Xqy9zCiqT201oXfDK4ElbrIo24x6TDufXDoTbAO24jUebSDqTr3v4FfTKGgVA</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method</title><source>Elsevier ScienceDirect Journals</source><creator>Meresse, D. ; Harmand, S. ; Siroux, M. ; Watremez, M. ; Dubar, L.</creator><creatorcontrib>Meresse, D. ; Harmand, S. ; Siroux, M. ; Watremez, M. ; Dubar, L.</creatorcontrib><description>This work focuses on the local heat fluxes on a disc during braking conditions. The generated heat and the temperature field are identified using an inverse heat conduction method coupled to temperature measurements inside the disc. Function specification is used to estimate the boundary conditions in the model without any prior information on the flux intensity and the evolution regarding the time and the position on the sliding surface. Disc heat flux identifications are performed for different braking conditions (sliding speed and normal pressure) on a High-Speed Tribometer. The temperature values are obtained using a telemetry system that allows inductive data transfer. The influence of the braking conditions on the heat repartition and the surface temperature is discussed.
► The disc local heat fluxes are calculated in braking conditions. ► Experimental temperatures are measured inside the disc using a telemetry device. ► A 2D inverse method allows for the identification of heat fluxes from measurements. ► A pressure influence on the heat repartition is highlighted.</description><identifier>ISSN: 1359-4311</identifier><identifier>EISSN: 1873-5606</identifier><identifier>DOI: 10.1016/j.applthermaleng.2012.04.033</identifier><language>eng</language><publisher>Kidlington: Elsevier Ltd</publisher><subject>Applied sciences ; Braking conditions ; Energy ; Energy. Thermal use of fuels ; Engineering Sciences ; Exact sciences and technology ; Heat transfer ; High Speed Tribometer ; Inverse method ; Mechanics ; Telemetry measurement ; Theoretical studies. Data and constants. Metering ; Thermics</subject><ispartof>Applied thermal engineering, 2012-12, Vol.48, p.202-210</ispartof><rights>2012 Elsevier Ltd</rights><rights>2015 INIST-CNRS</rights><rights>Distributed under a Creative Commons Attribution 4.0 International License</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c448t-34a91a30ac8e2b5524f81312641790ab9fea46cd476bb52203067b7a36ca4bfd3</citedby><cites>FETCH-LOGICAL-c448t-34a91a30ac8e2b5524f81312641790ab9fea46cd476bb52203067b7a36ca4bfd3</cites><orcidid>0000-0001-7835-0260 ; 0000-0001-9300-7575</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S1359431112002761$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>230,314,776,780,881,3537,27901,27902,65534</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=26304785$$DView record in Pascal Francis$$Hfree_for_read</backlink><backlink>$$Uhttps://uphf.hal.science/hal-02367753$$DView record in HAL$$Hfree_for_read</backlink></links><search><creatorcontrib>Meresse, D.</creatorcontrib><creatorcontrib>Harmand, S.</creatorcontrib><creatorcontrib>Siroux, M.</creatorcontrib><creatorcontrib>Watremez, M.</creatorcontrib><creatorcontrib>Dubar, L.</creatorcontrib><title>Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method</title><title>Applied thermal engineering</title><description>This work focuses on the local heat fluxes on a disc during braking conditions. The generated heat and the temperature field are identified using an inverse heat conduction method coupled to temperature measurements inside the disc. Function specification is used to estimate the boundary conditions in the model without any prior information on the flux intensity and the evolution regarding the time and the position on the sliding surface. Disc heat flux identifications are performed for different braking conditions (sliding speed and normal pressure) on a High-Speed Tribometer. The temperature values are obtained using a telemetry system that allows inductive data transfer. The influence of the braking conditions on the heat repartition and the surface temperature is discussed.
► The disc local heat fluxes are calculated in braking conditions. ► Experimental temperatures are measured inside the disc using a telemetry device. ► A 2D inverse method allows for the identification of heat fluxes from measurements. ► A pressure influence on the heat repartition is highlighted.</description><subject>Applied sciences</subject><subject>Braking conditions</subject><subject>Energy</subject><subject>Energy. Thermal use of fuels</subject><subject>Engineering Sciences</subject><subject>Exact sciences and technology</subject><subject>Heat transfer</subject><subject>High Speed Tribometer</subject><subject>Inverse method</subject><subject>Mechanics</subject><subject>Telemetry measurement</subject><subject>Theoretical studies. Data and constants. Metering</subject><subject>Thermics</subject><issn>1359-4311</issn><issn>1873-5606</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2012</creationdate><recordtype>article</recordtype><recordid>eNqNkE9LxDAQxYsoqKvfIQc9eGjNvyZd8CLiusKCFz2HaTrdzdptS9Jd9NubWhG8CYFkhvfeZH5JcsVoxihTt9sM-r4ZNuh30GC7zjhlPKMyo0IcJWes0CLNFVXH8S3yeSoFY6fJeQhbGoWFlmfJ_vGjR-922A7QkMoFSzYIA6mb_QdxVWy72lkYXNeSeIB4rPYWKxJsHElKD--uXZPwGQbckX0Yi_gh4toD-oBTmO3aaPrO2OGw6aqL5KSGJuDlzz1L3haPrw_LdPXy9Pxwv0qtlMWQCglzBoKCLZCXec5lXTDBuJJMzymU8xpBKltJrcoy55wKqnSpQSgLsqwrMUtuptwNNKaPa4L_NB04s7xfmbFHuVBa5-LAovZu0lrfheCx_jUwakbcZmv-4jYjbkOlibij_Xqy9zCiqT201oXfDK4ElbrIo24x6TDufXDoTbAO24jUebSDqTr3v4FfTKGgVA</recordid><startdate>20121215</startdate><enddate>20121215</enddate><creator>Meresse, D.</creator><creator>Harmand, S.</creator><creator>Siroux, M.</creator><creator>Watremez, M.</creator><creator>Dubar, L.</creator><general>Elsevier Ltd</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>1XC</scope><scope>VOOES</scope><orcidid>https://orcid.org/0000-0001-7835-0260</orcidid><orcidid>https://orcid.org/0000-0001-9300-7575</orcidid></search><sort><creationdate>20121215</creationdate><title>Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method</title><author>Meresse, D. ; Harmand, S. ; Siroux, M. ; Watremez, M. ; Dubar, L.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c448t-34a91a30ac8e2b5524f81312641790ab9fea46cd476bb52203067b7a36ca4bfd3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2012</creationdate><topic>Applied sciences</topic><topic>Braking conditions</topic><topic>Energy</topic><topic>Energy. Thermal use of fuels</topic><topic>Engineering Sciences</topic><topic>Exact sciences and technology</topic><topic>Heat transfer</topic><topic>High Speed Tribometer</topic><topic>Inverse method</topic><topic>Mechanics</topic><topic>Telemetry measurement</topic><topic>Theoretical studies. Data and constants. Metering</topic><topic>Thermics</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Meresse, D.</creatorcontrib><creatorcontrib>Harmand, S.</creatorcontrib><creatorcontrib>Siroux, M.</creatorcontrib><creatorcontrib>Watremez, M.</creatorcontrib><creatorcontrib>Dubar, L.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Hyper Article en Ligne (HAL)</collection><collection>Hyper Article en Ligne (HAL) (Open Access)</collection><jtitle>Applied thermal engineering</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Meresse, D.</au><au>Harmand, S.</au><au>Siroux, M.</au><au>Watremez, M.</au><au>Dubar, L.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method</atitle><jtitle>Applied thermal engineering</jtitle><date>2012-12-15</date><risdate>2012</risdate><volume>48</volume><spage>202</spage><epage>210</epage><pages>202-210</pages><issn>1359-4311</issn><eissn>1873-5606</eissn><abstract>This work focuses on the local heat fluxes on a disc during braking conditions. The generated heat and the temperature field are identified using an inverse heat conduction method coupled to temperature measurements inside the disc. Function specification is used to estimate the boundary conditions in the model without any prior information on the flux intensity and the evolution regarding the time and the position on the sliding surface. Disc heat flux identifications are performed for different braking conditions (sliding speed and normal pressure) on a High-Speed Tribometer. The temperature values are obtained using a telemetry system that allows inductive data transfer. The influence of the braking conditions on the heat repartition and the surface temperature is discussed.
► The disc local heat fluxes are calculated in braking conditions. ► Experimental temperatures are measured inside the disc using a telemetry device. ► A 2D inverse method allows for the identification of heat fluxes from measurements. ► A pressure influence on the heat repartition is highlighted.</abstract><cop>Kidlington</cop><pub>Elsevier Ltd</pub><doi>10.1016/j.applthermaleng.2012.04.033</doi><tpages>9</tpages><orcidid>https://orcid.org/0000-0001-7835-0260</orcidid><orcidid>https://orcid.org/0000-0001-9300-7575</orcidid><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1359-4311 |
| ispartof | Applied thermal engineering, 2012-12, Vol.48, p.202-210 |
| issn | 1359-4311 1873-5606 |
| language | eng |
| recordid | cdi_hal_primary_oai_HAL_hal_02367753v1 |
| source | Elsevier ScienceDirect Journals |
| subjects | Applied sciences Braking conditions Energy Energy. Thermal use of fuels Engineering Sciences Exact sciences and technology Heat transfer High Speed Tribometer Inverse method Mechanics Telemetry measurement Theoretical studies. Data and constants. Metering Thermics |
| title | Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-14T05%3A11%3A05IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-hal_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Experimental%20disc%20heat%20flux%20identification%20on%20a%20reduced%20scale%20braking%20system%20using%20the%20inverse%20heat%20conduction%20method&rft.jtitle=Applied%20thermal%20engineering&rft.au=Meresse,%20D.&rft.date=2012-12-15&rft.volume=48&rft.spage=202&rft.epage=210&rft.pages=202-210&rft.issn=1359-4311&rft.eissn=1873-5606&rft_id=info:doi/10.1016/j.applthermaleng.2012.04.033&rft_dat=%3Chal_cross%3Eoai_HAL_hal_02367753v1%3C/hal_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_els_id=S1359431112002761&rfr_iscdi=true |