The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials

The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials

3D printing represents one of the newer production technologies which are becoming more and more important. The widening range of materials used in 3D printing leads to the need to examine their mechanical properties. 3D printing parameters such as infill pattern, building orientation, layer thickne...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Tehnicki Vjesnik - Technical Gazette 2024, Vol.31 (6), p.1892
Hauptverfasser: Ourovic, Strahinja, Lazarevic, Dragan, Milovanovic, Vladimir, Misic, Milan, Sarkocevic, Zivce
Format: Report
Sprache:eng
Schlagworte:
3D printing
Mechanical properties
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue 6
container_start_page 1892
container_title Tehnicki Vjesnik - Technical Gazette
container_volume 31
creator Ourovic, Strahinja
Lazarevic, Dragan
Milovanovic, Vladimir
Misic, Milan
Sarkocevic, Zivce
description 3D printing represents one of the newer production technologies which are becoming more and more important. The widening range of materials used in 3D printing leads to the need to examine their mechanical properties. 3D printing parameters such as infill pattern, building orientation, layer thickness, number of layers in the wall and air gap have a great influence on the mechanical properties. In this study, the mechanical properties were examined from the perspective of the influence of the raster angle and the change in the number of layers in the wall. Three different materials were tested, PLA, PETG and ABS. The results showed that the highest tensile strength was obtained with PETG material, and the lowest with ABS. From the aspect of the influence of the printing parameters, we can conclude that the building orientation and the number of layers in the wall have influence on mechanical properties of the material. Keywords: 3D printing; mechanical properties; raster angle; tensile strength; wall layers
doi_str_mv 10.17559m/-20240325001430
format Report
fullrecord <record><control><sourceid>gale</sourceid><recordid>TN_cdi_gale_infotracacademiconefile_A817480101</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><galeid>A817480101</galeid><sourcerecordid>A817480101</sourcerecordid><originalsourceid>FETCH-gale_infotracacademiconefile_A8174801013</originalsourceid><addsrcrecordid>eNqVi8FOQjEQRbvQRKJ8ALv-wMNp-57AkqBGEzGGsCdD3xRq-qakLQv_3kL8ATOLmzn3HiEmCqZq1nWL4bHRoFswugNQrYEbMVLGQGOeOnUnxjl_A4CGFvTCjETcHkm-swtnYksyOlkq-DwPe0qX7wN_KGWJ3F-LDeZSiyUfQh3zla3JHpG9xSC_UjxRKp7yxTXPFXgu1Ms1Vs1jyA_i1tWg8V_ei-nry3b11hww0M6ziyWhrdfT4G1kcr7y5VzN2jkoUObfwi_KzFYf</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>report</recordtype></control><display><type>report</type><title>The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials</title><source>DOAJ Directory of Open Access Journals</source><source>Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals</source><creator>Ourovic, Strahinja ; Lazarevic, Dragan ; Milovanovic, Vladimir ; Misic, Milan ; Sarkocevic, Zivce</creator><creatorcontrib>Ourovic, Strahinja ; Lazarevic, Dragan ; Milovanovic, Vladimir ; Misic, Milan ; Sarkocevic, Zivce</creatorcontrib><description>3D printing represents one of the newer production technologies which are becoming more and more important. The widening range of materials used in 3D printing leads to the need to examine their mechanical properties. 3D printing parameters such as infill pattern, building orientation, layer thickness, number of layers in the wall and air gap have a great influence on the mechanical properties. In this study, the mechanical properties were examined from the perspective of the influence of the raster angle and the change in the number of layers in the wall. Three different materials were tested, PLA, PETG and ABS. The results showed that the highest tensile strength was obtained with PETG material, and the lowest with ABS. From the aspect of the influence of the printing parameters, we can conclude that the building orientation and the number of layers in the wall have influence on mechanical properties of the material. Keywords: 3D printing; mechanical properties; raster angle; tensile strength; wall layers</description><identifier>ISSN: 1330-3651</identifier><identifier>DOI: 10.17559m/-20240325001430</identifier><language>eng</language><publisher>University of Osijek</publisher><subject>3D printing ; Mechanical properties</subject><ispartof>Tehnicki Vjesnik - Technical Gazette, 2024, Vol.31 (6), p.1892</ispartof><rights>COPYRIGHT 2024 University of Osijek</rights><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>776,780,860,4476,27902</link.rule.ids></links><search><creatorcontrib>Ourovic, Strahinja</creatorcontrib><creatorcontrib>Lazarevic, Dragan</creatorcontrib><creatorcontrib>Milovanovic, Vladimir</creatorcontrib><creatorcontrib>Misic, Milan</creatorcontrib><creatorcontrib>Sarkocevic, Zivce</creatorcontrib><title>The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials</title><title>Tehnicki Vjesnik - Technical Gazette</title><description>3D printing represents one of the newer production technologies which are becoming more and more important. The widening range of materials used in 3D printing leads to the need to examine their mechanical properties. 3D printing parameters such as infill pattern, building orientation, layer thickness, number of layers in the wall and air gap have a great influence on the mechanical properties. In this study, the mechanical properties were examined from the perspective of the influence of the raster angle and the change in the number of layers in the wall. Three different materials were tested, PLA, PETG and ABS. The results showed that the highest tensile strength was obtained with PETG material, and the lowest with ABS. From the aspect of the influence of the printing parameters, we can conclude that the building orientation and the number of layers in the wall have influence on mechanical properties of the material. Keywords: 3D printing; mechanical properties; raster angle; tensile strength; wall layers</description><subject>3D printing</subject><subject>Mechanical properties</subject><issn>1330-3651</issn><fulltext>true</fulltext><rsrctype>report</rsrctype><creationdate>2024</creationdate><recordtype>report</recordtype><sourceid/><recordid>eNqVi8FOQjEQRbvQRKJ8ALv-wMNp-57AkqBGEzGGsCdD3xRq-qakLQv_3kL8ATOLmzn3HiEmCqZq1nWL4bHRoFswugNQrYEbMVLGQGOeOnUnxjl_A4CGFvTCjETcHkm-swtnYksyOlkq-DwPe0qX7wN_KGWJ3F-LDeZSiyUfQh3zla3JHpG9xSC_UjxRKp7yxTXPFXgu1Ms1Vs1jyA_i1tWg8V_ei-nry3b11hww0M6ziyWhrdfT4G1kcr7y5VzN2jkoUObfwi_KzFYf</recordid><startdate>20241201</startdate><enddate>20241201</enddate><creator>Ourovic, Strahinja</creator><creator>Lazarevic, Dragan</creator><creator>Milovanovic, Vladimir</creator><creator>Misic, Milan</creator><creator>Sarkocevic, Zivce</creator><general>University of Osijek</general><scope/></search><sort><creationdate>20241201</creationdate><title>The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials</title><author>Ourovic, Strahinja ; Lazarevic, Dragan ; Milovanovic, Vladimir ; Misic, Milan ; Sarkocevic, Zivce</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-gale_infotracacademiconefile_A8174801013</frbrgroupid><rsrctype>reports</rsrctype><prefilter>reports</prefilter><language>eng</language><creationdate>2024</creationdate><topic>3D printing</topic><topic>Mechanical properties</topic><toplevel>online_resources</toplevel><creatorcontrib>Ourovic, Strahinja</creatorcontrib><creatorcontrib>Lazarevic, Dragan</creatorcontrib><creatorcontrib>Milovanovic, Vladimir</creatorcontrib><creatorcontrib>Misic, Milan</creatorcontrib><creatorcontrib>Sarkocevic, Zivce</creatorcontrib></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Ourovic, Strahinja</au><au>Lazarevic, Dragan</au><au>Milovanovic, Vladimir</au><au>Misic, Milan</au><au>Sarkocevic, Zivce</au><format>book</format><genre>unknown</genre><ristype>RPRT</ristype><atitle>The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials</atitle><jtitle>Tehnicki Vjesnik - Technical Gazette</jtitle><date>2024-12-01</date><risdate>2024</risdate><volume>31</volume><issue>6</issue><spage>1892</spage><pages>1892-</pages><issn>1330-3651</issn><abstract>3D printing represents one of the newer production technologies which are becoming more and more important. The widening range of materials used in 3D printing leads to the need to examine their mechanical properties. 3D printing parameters such as infill pattern, building orientation, layer thickness, number of layers in the wall and air gap have a great influence on the mechanical properties. In this study, the mechanical properties were examined from the perspective of the influence of the raster angle and the change in the number of layers in the wall. Three different materials were tested, PLA, PETG and ABS. The results showed that the highest tensile strength was obtained with PETG material, and the lowest with ABS. From the aspect of the influence of the printing parameters, we can conclude that the building orientation and the number of layers in the wall have influence on mechanical properties of the material. Keywords: 3D printing; mechanical properties; raster angle; tensile strength; wall layers</abstract><pub>University of Osijek</pub><doi>10.17559m/-20240325001430</doi></addata></record>
fulltext fulltext
identifier ISSN: 1330-3651
ispartof Tehnicki Vjesnik - Technical Gazette, 2024, Vol.31 (6), p.1892
issn 1330-3651
language eng
recordid cdi_gale_infotracacademiconefile_A817480101
source DOAJ Directory of Open Access Journals; Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals
subjects 3D printing
Mechanical properties
title The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-21T12%3A24%3A41IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-gale&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=unknown&rft.atitle=The%20Influence%20of%20the%20Number%20of%20Layers%20and%20the%20Raster%20Angle%20on%20the%20Mechanical%20Properties%20of%203D%20Printed%20Materials&rft.jtitle=Tehnicki%20Vjesnik%20-%20Technical%20Gazette&rft.au=Ourovic,%20Strahinja&rft.date=2024-12-01&rft.volume=31&rft.issue=6&rft.spage=1892&rft.pages=1892-&rft.issn=1330-3651&rft_id=info:doi/10.17559m/-20240325001430&rft_dat=%3Cgale%3EA817480101%3C/gale%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_galeid=A817480101&rfr_iscdi=true