MOLD CONDITIONING RUBBER COMPOSITION
27A compression type, mold conditioning rubber composition for imparting release properties to a mold surface after removal of stains deposited during molding of a curing resin. The composition contains an unvulcanized rubber comprising an ethylene-propylene rubber and a butadiene rubber in a weight...
Gespeichert in:
| Hauptverfasser: | , , |
|---|---|
| Format: | Patent |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | |
| container_start_page | |
| container_title | |
| container_volume | |
| creator | HIROAKI NOMURA OSAMU SUNAGO KIYOHITO HIROMITSU |
| description | 27A compression type, mold conditioning rubber composition for imparting release properties to a mold surface after removal of stains deposited during molding of a curing resin. The composition contains an unvulcanized rubber comprising an ethylene-propylene rubber and a butadiene rubber in a weight mixing ratio of 90/10 to 50/50 as a base resin and a specific release agent. The unvulcanized rubber has a 90% cure time (optimum cure point) tc(90) of from 50 to 100 seconds or from 200 to 400 seconds at a mold temperature of 175FC and, after cure, an elongation of 80% to 800%, a tensile strength of 3 to 10 MPa, and a rubber hardness (durometer A hardness)io of 60 to 95. -IPOS 9E713 PM AO * |
| format | Patent |
| fullrecord | <record><control><sourceid>epo_EVB</sourceid><recordid>TN_cdi_epo_espacenet_SG194416A1</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>SG194416A1</sourcerecordid><originalsourceid>FETCH-epo_espacenet_SG194416A13</originalsourceid><addsrcrecordid>eNrjZFDx9fdxUXD293PxDPH09_P0c1cICnVycg0CivkG-AeDRXkYWNMSc4pTeaE0N4O8m2uIs4duakF-fGpxQWJyal5qSXywu6GliYmhmaOhMWEVAAzuInQ</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>patent</recordtype></control><display><type>patent</type><title>MOLD CONDITIONING RUBBER COMPOSITION</title><source>esp@cenet</source><creator>HIROAKI NOMURA ; OSAMU SUNAGO ; KIYOHITO HIROMITSU</creator><creatorcontrib>HIROAKI NOMURA ; OSAMU SUNAGO ; KIYOHITO HIROMITSU</creatorcontrib><description>27A compression type, mold conditioning rubber composition for imparting release properties to a mold surface after removal of stains deposited during molding of a curing resin. The composition contains an unvulcanized rubber comprising an ethylene-propylene rubber and a butadiene rubber in a weight mixing ratio of 90/10 to 50/50 as a base resin and a specific release agent. The unvulcanized rubber has a 90% cure time (optimum cure point) tc(90) of from 50 to 100 seconds or from 200 to 400 seconds at a mold temperature of 175FC and, after cure, an elongation of 80% to 800%, a tensile strength of 3 to 10 MPa, and a rubber hardness (durometer A hardness)io of 60 to 95. -IPOS 9E713 PM AO *</description><language>eng</language><subject>AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING ; CHEMISTRY ; COMPOSITIONS BASED THEREON ; COMPOSITIONS OF MACROMOLECULAR COMPOUNDS ; METALLURGY ; ORGANIC MACROMOLECULAR COMPOUNDS ; PERFORMING OPERATIONS ; SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDEDFOR ; SHAPING OR JOINING OF PLASTICS ; THEIR PREPARATION OR CHEMICAL WORKING-UP ; TRANSPORTING ; USE OF INORGANIC OR NON-MACROMOLECULAR ORGANIC SUBSTANCES ASCOMPOUNDING INGREDIENTS ; WORKING OF PLASTICS ; WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL</subject><creationdate>2013</creationdate><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=20131129&DB=EPODOC&CC=SG&NR=194416A1$$EHTML$$P50$$Gepo$$Hfree_for_read</linktohtml><link.rule.ids>230,308,780,885,25564,76547</link.rule.ids><linktorsrc>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=20131129&DB=EPODOC&CC=SG&NR=194416A1$$EView_record_in_European_Patent_Office$$FView_record_in_$$GEuropean_Patent_Office$$Hfree_for_read</linktorsrc></links><search><creatorcontrib>HIROAKI NOMURA</creatorcontrib><creatorcontrib>OSAMU SUNAGO</creatorcontrib><creatorcontrib>KIYOHITO HIROMITSU</creatorcontrib><title>MOLD CONDITIONING RUBBER COMPOSITION</title><description>27A compression type, mold conditioning rubber composition for imparting release properties to a mold surface after removal of stains deposited during molding of a curing resin. The composition contains an unvulcanized rubber comprising an ethylene-propylene rubber and a butadiene rubber in a weight mixing ratio of 90/10 to 50/50 as a base resin and a specific release agent. The unvulcanized rubber has a 90% cure time (optimum cure point) tc(90) of from 50 to 100 seconds or from 200 to 400 seconds at a mold temperature of 175FC and, after cure, an elongation of 80% to 800%, a tensile strength of 3 to 10 MPa, and a rubber hardness (durometer A hardness)io of 60 to 95. -IPOS 9E713 PM AO *</description><subject>AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING</subject><subject>CHEMISTRY</subject><subject>COMPOSITIONS BASED THEREON</subject><subject>COMPOSITIONS OF MACROMOLECULAR COMPOUNDS</subject><subject>METALLURGY</subject><subject>ORGANIC MACROMOLECULAR COMPOUNDS</subject><subject>PERFORMING OPERATIONS</subject><subject>SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDEDFOR</subject><subject>SHAPING OR JOINING OF PLASTICS</subject><subject>THEIR PREPARATION OR CHEMICAL WORKING-UP</subject><subject>TRANSPORTING</subject><subject>USE OF INORGANIC OR NON-MACROMOLECULAR ORGANIC SUBSTANCES ASCOMPOUNDING INGREDIENTS</subject><subject>WORKING OF PLASTICS</subject><subject>WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL</subject><fulltext>true</fulltext><rsrctype>patent</rsrctype><creationdate>2013</creationdate><recordtype>patent</recordtype><sourceid>EVB</sourceid><recordid>eNrjZFDx9fdxUXD293PxDPH09_P0c1cICnVycg0CivkG-AeDRXkYWNMSc4pTeaE0N4O8m2uIs4duakF-fGpxQWJyal5qSXywu6GliYmhmaOhMWEVAAzuInQ</recordid><startdate>20131129</startdate><enddate>20131129</enddate><creator>HIROAKI NOMURA</creator><creator>OSAMU SUNAGO</creator><creator>KIYOHITO HIROMITSU</creator><scope>EVB</scope></search><sort><creationdate>20131129</creationdate><title>MOLD CONDITIONING RUBBER COMPOSITION</title><author>HIROAKI NOMURA ; OSAMU SUNAGO ; KIYOHITO HIROMITSU</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-epo_espacenet_SG194416A13</frbrgroupid><rsrctype>patents</rsrctype><prefilter>patents</prefilter><language>eng</language><creationdate>2013</creationdate><topic>AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING</topic><topic>CHEMISTRY</topic><topic>COMPOSITIONS BASED THEREON</topic><topic>COMPOSITIONS OF MACROMOLECULAR COMPOUNDS</topic><topic>METALLURGY</topic><topic>ORGANIC MACROMOLECULAR COMPOUNDS</topic><topic>PERFORMING OPERATIONS</topic><topic>SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDEDFOR</topic><topic>SHAPING OR JOINING OF PLASTICS</topic><topic>THEIR PREPARATION OR CHEMICAL WORKING-UP</topic><topic>TRANSPORTING</topic><topic>USE OF INORGANIC OR NON-MACROMOLECULAR ORGANIC SUBSTANCES ASCOMPOUNDING INGREDIENTS</topic><topic>WORKING OF PLASTICS</topic><topic>WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL</topic><toplevel>online_resources</toplevel><creatorcontrib>HIROAKI NOMURA</creatorcontrib><creatorcontrib>OSAMU SUNAGO</creatorcontrib><creatorcontrib>KIYOHITO HIROMITSU</creatorcontrib><collection>esp@cenet</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>HIROAKI NOMURA</au><au>OSAMU SUNAGO</au><au>KIYOHITO HIROMITSU</au><format>patent</format><genre>patent</genre><ristype>GEN</ristype><title>MOLD CONDITIONING RUBBER COMPOSITION</title><date>2013-11-29</date><risdate>2013</risdate><abstract>27A compression type, mold conditioning rubber composition for imparting release properties to a mold surface after removal of stains deposited during molding of a curing resin. The composition contains an unvulcanized rubber comprising an ethylene-propylene rubber and a butadiene rubber in a weight mixing ratio of 90/10 to 50/50 as a base resin and a specific release agent. The unvulcanized rubber has a 90% cure time (optimum cure point) tc(90) of from 50 to 100 seconds or from 200 to 400 seconds at a mold temperature of 175FC and, after cure, an elongation of 80% to 800%, a tensile strength of 3 to 10 MPa, and a rubber hardness (durometer A hardness)io of 60 to 95. -IPOS 9E713 PM AO *</abstract><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | |
| ispartof | |
| issn | |
| language | eng |
| recordid | cdi_epo_espacenet_SG194416A1 |
| source | esp@cenet |
| subjects | AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING CHEMISTRY COMPOSITIONS BASED THEREON COMPOSITIONS OF MACROMOLECULAR COMPOUNDS METALLURGY ORGANIC MACROMOLECULAR COMPOUNDS PERFORMING OPERATIONS SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDEDFOR SHAPING OR JOINING OF PLASTICS THEIR PREPARATION OR CHEMICAL WORKING-UP TRANSPORTING USE OF INORGANIC OR NON-MACROMOLECULAR ORGANIC SUBSTANCES ASCOMPOUNDING INGREDIENTS WORKING OF PLASTICS WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL |
| title | MOLD CONDITIONING RUBBER COMPOSITION |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-28T15%3A11%3A01IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-epo_EVB&rft_val_fmt=info:ofi/fmt:kev:mtx:patent&rft.genre=patent&rft.au=HIROAKI%20NOMURA&rft.date=2013-11-29&rft_id=info:doi/&rft_dat=%3Cepo_EVB%3ESG194416A1%3C/epo_EVB%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |