COILING EQUIPMENT FOR HOT ROLLED STEEL TAPE

PURPOSE:To prevent an uneven edge from occurrence in a coil by arranging the side guide of a hot rolled steel tape between a pinch roll and the mandrel of a take-up machine. CONSTITUTION:Aprons 10a, 10b limit the upper and lower movements of the steel strip S and prevent the tip of the steel tape fr...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: NOMURA NOBUAKI, SOYA MIKIO, TAKECHI TOSHISADA
Format: Patent
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue
container_start_page
container_title
container_volume
creator NOMURA NOBUAKI
SOYA MIKIO
TAKECHI TOSHISADA
description PURPOSE:To prevent an uneven edge from occurrence in a coil by arranging the side guide of a hot rolled steel tape between a pinch roll and the mandrel of a take-up machine. CONSTITUTION:Aprons 10a, 10b limit the upper and lower movements of the steel strip S and prevent the tip of the steel tape from colliding with a deflecting roll 7, etc. The side guide 11 has a U-shaped section and is so constituted that it can freely go in and out from the outsides of the aprons 10a, 10b to the width direction of the steel tape S and the opening can be controlled. Thus, the starting part of coiling and the unevenness of the edges of the steady part can be improved.
format Patent
fullrecord <record><control><sourceid>epo_EVB</sourceid><recordid>TN_cdi_epo_espacenet_JPH02133114A</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>JPH02133114A</sourcerecordid><originalsourceid>FETCH-epo_espacenet_JPH02133114A3</originalsourceid><addsrcrecordid>eNrjZNB29vf08fRzV3ANDPUM8HX1C1Fw8w9S8PAPUQjy9_FxdVEIDnF19VEIcQxw5WFgTUvMKU7lhdLcDIpuriHOHrqpBfnxqcUFicmpeakl8V4BHgZGhsbGhoYmjsbEqAEAbo4k6g</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>patent</recordtype></control><display><type>patent</type><title>COILING EQUIPMENT FOR HOT ROLLED STEEL TAPE</title><source>esp@cenet</source><creator>NOMURA NOBUAKI ; SOYA MIKIO ; TAKECHI TOSHISADA</creator><creatorcontrib>NOMURA NOBUAKI ; SOYA MIKIO ; TAKECHI TOSHISADA</creatorcontrib><description>PURPOSE:To prevent an uneven edge from occurrence in a coil by arranging the side guide of a hot rolled steel tape between a pinch roll and the mandrel of a take-up machine. CONSTITUTION:Aprons 10a, 10b limit the upper and lower movements of the steel strip S and prevent the tip of the steel tape from colliding with a deflecting roll 7, etc. The side guide 11 has a U-shaped section and is so constituted that it can freely go in and out from the outsides of the aprons 10a, 10b to the width direction of the steel tape S and the opening can be controlled. Thus, the starting part of coiling and the unevenness of the edges of the steady part can be improved.</description><language>eng</language><subject>AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL ; CHEMISTRY ; GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUSMETALS OR ALLOYS ; MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHERTREATMENTS ; MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING ; MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL ; METALLURGY ; METALLURGY OF IRON ; MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS ; PERFORMING OPERATIONS ; PUNCHING METAL ; TRANSPORTING</subject><creationdate>1990</creationdate><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&amp;date=19900522&amp;DB=EPODOC&amp;CC=JP&amp;NR=H02133114A$$EHTML$$P50$$Gepo$$Hfree_for_read</linktohtml><link.rule.ids>230,308,780,885,25564,76547</link.rule.ids><linktorsrc>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&amp;date=19900522&amp;DB=EPODOC&amp;CC=JP&amp;NR=H02133114A$$EView_record_in_European_Patent_Office$$FView_record_in_$$GEuropean_Patent_Office$$Hfree_for_read</linktorsrc></links><search><creatorcontrib>NOMURA NOBUAKI</creatorcontrib><creatorcontrib>SOYA MIKIO</creatorcontrib><creatorcontrib>TAKECHI TOSHISADA</creatorcontrib><title>COILING EQUIPMENT FOR HOT ROLLED STEEL TAPE</title><description>PURPOSE:To prevent an uneven edge from occurrence in a coil by arranging the side guide of a hot rolled steel tape between a pinch roll and the mandrel of a take-up machine. CONSTITUTION:Aprons 10a, 10b limit the upper and lower movements of the steel strip S and prevent the tip of the steel tape from colliding with a deflecting roll 7, etc. The side guide 11 has a U-shaped section and is so constituted that it can freely go in and out from the outsides of the aprons 10a, 10b to the width direction of the steel tape S and the opening can be controlled. Thus, the starting part of coiling and the unevenness of the edges of the steady part can be improved.</description><subject>AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL</subject><subject>CHEMISTRY</subject><subject>GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUSMETALS OR ALLOYS</subject><subject>MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHERTREATMENTS</subject><subject>MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING</subject><subject>MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL</subject><subject>METALLURGY</subject><subject>METALLURGY OF IRON</subject><subject>MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS</subject><subject>PERFORMING OPERATIONS</subject><subject>PUNCHING METAL</subject><subject>TRANSPORTING</subject><fulltext>true</fulltext><rsrctype>patent</rsrctype><creationdate>1990</creationdate><recordtype>patent</recordtype><sourceid>EVB</sourceid><recordid>eNrjZNB29vf08fRzV3ANDPUM8HX1C1Fw8w9S8PAPUQjy9_FxdVEIDnF19VEIcQxw5WFgTUvMKU7lhdLcDIpuriHOHrqpBfnxqcUFicmpeakl8V4BHgZGhsbGhoYmjsbEqAEAbo4k6g</recordid><startdate>19900522</startdate><enddate>19900522</enddate><creator>NOMURA NOBUAKI</creator><creator>SOYA MIKIO</creator><creator>TAKECHI TOSHISADA</creator><scope>EVB</scope></search><sort><creationdate>19900522</creationdate><title>COILING EQUIPMENT FOR HOT ROLLED STEEL TAPE</title><author>NOMURA NOBUAKI ; SOYA MIKIO ; TAKECHI TOSHISADA</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-epo_espacenet_JPH02133114A3</frbrgroupid><rsrctype>patents</rsrctype><prefilter>patents</prefilter><language>eng</language><creationdate>1990</creationdate><topic>AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL</topic><topic>CHEMISTRY</topic><topic>GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUSMETALS OR ALLOYS</topic><topic>MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHERTREATMENTS</topic><topic>MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING</topic><topic>MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL</topic><topic>METALLURGY</topic><topic>METALLURGY OF IRON</topic><topic>MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS</topic><topic>PERFORMING OPERATIONS</topic><topic>PUNCHING METAL</topic><topic>TRANSPORTING</topic><toplevel>online_resources</toplevel><creatorcontrib>NOMURA NOBUAKI</creatorcontrib><creatorcontrib>SOYA MIKIO</creatorcontrib><creatorcontrib>TAKECHI TOSHISADA</creatorcontrib><collection>esp@cenet</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>NOMURA NOBUAKI</au><au>SOYA MIKIO</au><au>TAKECHI TOSHISADA</au><format>patent</format><genre>patent</genre><ristype>GEN</ristype><title>COILING EQUIPMENT FOR HOT ROLLED STEEL TAPE</title><date>1990-05-22</date><risdate>1990</risdate><abstract>PURPOSE:To prevent an uneven edge from occurrence in a coil by arranging the side guide of a hot rolled steel tape between a pinch roll and the mandrel of a take-up machine. CONSTITUTION:Aprons 10a, 10b limit the upper and lower movements of the steel strip S and prevent the tip of the steel tape from colliding with a deflecting roll 7, etc. The side guide 11 has a U-shaped section and is so constituted that it can freely go in and out from the outsides of the aprons 10a, 10b to the width direction of the steel tape S and the opening can be controlled. Thus, the starting part of coiling and the unevenness of the edges of the steady part can be improved.</abstract><oa>free_for_read</oa></addata></record>
fulltext fulltext_linktorsrc
identifier
ispartof
issn
language eng
recordid cdi_epo_espacenet_JPH02133114A
source esp@cenet
subjects AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL
CHEMISTRY
GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUSMETALS OR ALLOYS
MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHERTREATMENTS
MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING
MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL
METALLURGY
METALLURGY OF IRON
MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS
PERFORMING OPERATIONS
PUNCHING METAL
TRANSPORTING
title COILING EQUIPMENT FOR HOT ROLLED STEEL TAPE
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-23T06%3A46%3A08IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-epo_EVB&rft_val_fmt=info:ofi/fmt:kev:mtx:patent&rft.genre=patent&rft.au=NOMURA%20NOBUAKI&rft.date=1990-05-22&rft_id=info:doi/&rft_dat=%3Cepo_EVB%3EJPH02133114A%3C/epo_EVB%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true