DISPOSITIVO DE CORRECCION POSTURAL Y ESTIRAMIENTO DINAMICO DE LA COLUMNA

Device for postural correction and dynamic stretching of the spine, characterized in that it comprises: A support vest (2) that will contain a semi-rigid central plate (1) that will be covered by a padded surface (4) of the same dimensions as the semi-rigid central plate (1) that will hold the height-adjustable lumbar support (9). The fastening vest (2) that contains the semi-rigid plate (1) that is closed with a zipper (47) on the front and three quick double-adjustment closures (46) that will activate the adjustment straps (5) that will pass through the clips (44) will offer a uniform and comfortable adjustment to be able to exert traction with the mechanism (3) and its accessories. A restraint system for fixing the head, consisting of a horseshoe-shaped device (23) and a chin strap (24) that fix the head for correct traction, the strap (24) that holds the chin will be adjusted and fixed on the velcro{reg} (25). - A traction system (3) that is made up of tubes (16) that will contain two bars (15), a rectangular bar (11) that has a hole (13) where the threaded rod (22) will work freely and will pass through a bearing (20) that will be held by a plate (21) and that through the coupling (19) will be able to transmit the rotation of the rod (22) with any of the drive methods that will be fixed in the hole (18) of the stocks (17), which presents, in turn, a solid nut (10) which has a threaded hole (12) where the traction movement is generated that pushes the bar (11) and accompanies the bar (15) and also has some bars (14) that will be coupled to the system head restraint. In its lower part it has the coupling (8) of the traction that will be transmitted by the cable (6) and regulated with the control (7), - A control system (43) of the traction system (3) that is made up of an electrical system consisting of a cable (6) and a control (7) that interact with an electric motor (37) with its coupling (38) a control cable (36) a switch (34) and a regulator (35), as well as the mechanical transmission with its coupling (38) a fixing (42) a traction cable (41) with a control (39) and a mechanical adjuster (40) by turn, a fastening system for the hanger head (32), which is made up of a chinstrap (33) and a square (27) supported by a base (26) that has the system of traction (14), where the square (27) contains a graduated comb (18) for the regulation of the hanger (32) that will be placed with the shackle (29) where the comb (28) enters the part of the shackle (30)