Covering polystyrene or polyurethane form board with polystyrene PVC - PE or PP by hot air spray coating covering with hot-melt cold-set adhesive and pressing moving covering on to moving board
The method is intended for continuously applying a cover layer in plate form of one or both sides of board material or a continuously succession of boards using adhesive. A hot-melt cold-set adhesive (synthetic and natural rubber-based) is atomised (hot air-pressurised spray nozzles) and distributed...
Gespeichert in:
| Format: | Patent |
|---|---|
| Sprache: | dut ; eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | |
| container_start_page | |
| container_title | |
| container_volume | |
| description | The method is intended for continuously applying a cover layer in plate form of one or both sides of board material or a continuously succession of boards using adhesive. A hot-melt cold-set adhesive (synthetic and natural rubber-based) is atomised (hot air-pressurised spray nozzles) and distributed over the full width of the moving layer (from roll) after which this layer is pressed on to the moving board(s). The cover layer may consist of polystyrene, polythene, PVC or polypropylene whilst tbe boardr material is insulating board consisting of expanded or extruded polystyrene foam, or polyurethane foam. The temp. of adhesive and air are pref. controlled (170 deg.C and 175 deg.C respectively).
Werkwijze om doorlopend een deklaag, onder vaste bandplaatvorm, op een doorlopend oppervlak of op tegen elkaar aangedrukte panelen, het kernmateriaal, ter verlijmen gekenmerkt door het vernevelen van de lijm over de breedte van het voortbewegend deklaag materiaal waarna dat deklaag materiaal onder een drukrol aangedrukt wordt op het voortbewegend kernmateriaal. Inrichting om dergelijke werkwijze uit te voeren. |
| format | Patent |
| fullrecord | <record><control><sourceid>epo_EVB</sourceid><recordid>TN_cdi_epo_espacenet_BE903882A</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>BE903882A</sourcerecordid><originalsourceid>FETCH-epo_espacenet_BE903882A3</originalsourceid><addsrcrecordid>eNqFjrEOgkAQRGksjPoLZn-AxEiDpRKMJYWxJQe3eJcc7GXvxPB5_pkHkYLKajOTN7Ozjj4Z9ci6e4IlMzg_MHYIxJN8MXolgm6IW6hIsIS39mrBFo8MYijyMVQUUA2gyIPQDM6yGKAm4cf-en40NQQmbtH4YBsZOwwJqdDpHkF0EiyjcyPcUr8IUweeZndatI1WjTAOd7-7ifbX_J7dYrRUorOiDit9eclPhyRNj-fkL_AFfuVfqA</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>patent</recordtype></control><display><type>patent</type><title>Covering polystyrene or polyurethane form board with polystyrene PVC - PE or PP by hot air spray coating covering with hot-melt cold-set adhesive and pressing moving covering on to moving board</title><source>esp@cenet</source><description>The method is intended for continuously applying a cover layer in plate form of one or both sides of board material or a continuously succession of boards using adhesive. A hot-melt cold-set adhesive (synthetic and natural rubber-based) is atomised (hot air-pressurised spray nozzles) and distributed over the full width of the moving layer (from roll) after which this layer is pressed on to the moving board(s). The cover layer may consist of polystyrene, polythene, PVC or polypropylene whilst tbe boardr material is insulating board consisting of expanded or extruded polystyrene foam, or polyurethane foam. The temp. of adhesive and air are pref. controlled (170 deg.C and 175 deg.C respectively).
Werkwijze om doorlopend een deklaag, onder vaste bandplaatvorm, op een doorlopend oppervlak of op tegen elkaar aangedrukte panelen, het kernmateriaal, ter verlijmen gekenmerkt door het vernevelen van de lijm over de breedte van het voortbewegend deklaag materiaal waarna dat deklaag materiaal onder een drukrol aangedrukt wordt op het voortbewegend kernmateriaal. Inrichting om dergelijke werkwijze uit te voeren.</description><edition>4</edition><language>dut ; eng</language><subject>APPLYING LIQUIDS OR OTHER FLUENT MATERIALS TO SURFACES, IN GENERAL ; ATOMISING APPARATUS ; DOMESTIC PLUMBING INSTALLATIONS FOR FRESH WATER OR WASTE WATER ; FIXED CONSTRUCTIONS ; LAYERED PRODUCTS ; LAYERED PRODUCTS, i.e. PRODUCTS BUILT-UP OF STRATA OF FLAT ORNON-FLAT, e.g. CELLULAR OR HONEYCOMB, FORM ; NOZZLES ; PERFORMING OPERATIONS ; SEWERAGE ; SINKS ; SPRAYING APPARATUS ; SPRAYING OR ATOMISING IN GENERAL ; TRANSPORTING ; WATER SUPPLY</subject><creationdate>1986</creationdate><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19860416&DB=EPODOC&CC=BE&NR=903882A$$EHTML$$P50$$Gepo$$Hfree_for_read</linktohtml><link.rule.ids>230,308,776,881,25542,76516</link.rule.ids><linktorsrc>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19860416&DB=EPODOC&CC=BE&NR=903882A$$EView_record_in_European_Patent_Office$$FView_record_in_$$GEuropean_Patent_Office$$Hfree_for_read</linktorsrc></links><search><title>Covering polystyrene or polyurethane form board with polystyrene PVC - PE or PP by hot air spray coating covering with hot-melt cold-set adhesive and pressing moving covering on to moving board</title><description>The method is intended for continuously applying a cover layer in plate form of one or both sides of board material or a continuously succession of boards using adhesive. A hot-melt cold-set adhesive (synthetic and natural rubber-based) is atomised (hot air-pressurised spray nozzles) and distributed over the full width of the moving layer (from roll) after which this layer is pressed on to the moving board(s). The cover layer may consist of polystyrene, polythene, PVC or polypropylene whilst tbe boardr material is insulating board consisting of expanded or extruded polystyrene foam, or polyurethane foam. The temp. of adhesive and air are pref. controlled (170 deg.C and 175 deg.C respectively).
Werkwijze om doorlopend een deklaag, onder vaste bandplaatvorm, op een doorlopend oppervlak of op tegen elkaar aangedrukte panelen, het kernmateriaal, ter verlijmen gekenmerkt door het vernevelen van de lijm over de breedte van het voortbewegend deklaag materiaal waarna dat deklaag materiaal onder een drukrol aangedrukt wordt op het voortbewegend kernmateriaal. Inrichting om dergelijke werkwijze uit te voeren.</description><subject>APPLYING LIQUIDS OR OTHER FLUENT MATERIALS TO SURFACES, IN GENERAL</subject><subject>ATOMISING APPARATUS</subject><subject>DOMESTIC PLUMBING INSTALLATIONS FOR FRESH WATER OR WASTE WATER</subject><subject>FIXED CONSTRUCTIONS</subject><subject>LAYERED PRODUCTS</subject><subject>LAYERED PRODUCTS, i.e. PRODUCTS BUILT-UP OF STRATA OF FLAT ORNON-FLAT, e.g. CELLULAR OR HONEYCOMB, FORM</subject><subject>NOZZLES</subject><subject>PERFORMING OPERATIONS</subject><subject>SEWERAGE</subject><subject>SINKS</subject><subject>SPRAYING APPARATUS</subject><subject>SPRAYING OR ATOMISING IN GENERAL</subject><subject>TRANSPORTING</subject><subject>WATER SUPPLY</subject><fulltext>true</fulltext><rsrctype>patent</rsrctype><creationdate>1986</creationdate><recordtype>patent</recordtype><sourceid>EVB</sourceid><recordid>eNqFjrEOgkAQRGksjPoLZn-AxEiDpRKMJYWxJQe3eJcc7GXvxPB5_pkHkYLKajOTN7Ozjj4Z9ci6e4IlMzg_MHYIxJN8MXolgm6IW6hIsIS39mrBFo8MYijyMVQUUA2gyIPQDM6yGKAm4cf-en40NQQmbtH4YBsZOwwJqdDpHkF0EiyjcyPcUr8IUweeZndatI1WjTAOd7-7ifbX_J7dYrRUorOiDit9eclPhyRNj-fkL_AFfuVfqA</recordid><startdate>19860416</startdate><enddate>19860416</enddate><scope>EVB</scope></search><sort><creationdate>19860416</creationdate><title>Covering polystyrene or polyurethane form board with polystyrene PVC - PE or PP by hot air spray coating covering with hot-melt cold-set adhesive and pressing moving covering on to moving board</title></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-epo_espacenet_BE903882A3</frbrgroupid><rsrctype>patents</rsrctype><prefilter>patents</prefilter><language>dut ; eng</language><creationdate>1986</creationdate><topic>APPLYING LIQUIDS OR OTHER FLUENT MATERIALS TO SURFACES, IN GENERAL</topic><topic>ATOMISING APPARATUS</topic><topic>DOMESTIC PLUMBING INSTALLATIONS FOR FRESH WATER OR WASTE WATER</topic><topic>FIXED CONSTRUCTIONS</topic><topic>LAYERED PRODUCTS</topic><topic>LAYERED PRODUCTS, i.e. PRODUCTS BUILT-UP OF STRATA OF FLAT ORNON-FLAT, e.g. CELLULAR OR HONEYCOMB, FORM</topic><topic>NOZZLES</topic><topic>PERFORMING OPERATIONS</topic><topic>SEWERAGE</topic><topic>SINKS</topic><topic>SPRAYING APPARATUS</topic><topic>SPRAYING OR ATOMISING IN GENERAL</topic><topic>TRANSPORTING</topic><topic>WATER SUPPLY</topic><toplevel>online_resources</toplevel><collection>esp@cenet</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><format>patent</format><genre>patent</genre><ristype>GEN</ristype><title>Covering polystyrene or polyurethane form board with polystyrene PVC - PE or PP by hot air spray coating covering with hot-melt cold-set adhesive and pressing moving covering on to moving board</title><date>1986-04-16</date><risdate>1986</risdate><abstract>The method is intended for continuously applying a cover layer in plate form of one or both sides of board material or a continuously succession of boards using adhesive. A hot-melt cold-set adhesive (synthetic and natural rubber-based) is atomised (hot air-pressurised spray nozzles) and distributed over the full width of the moving layer (from roll) after which this layer is pressed on to the moving board(s). The cover layer may consist of polystyrene, polythene, PVC or polypropylene whilst tbe boardr material is insulating board consisting of expanded or extruded polystyrene foam, or polyurethane foam. The temp. of adhesive and air are pref. controlled (170 deg.C and 175 deg.C respectively).
Werkwijze om doorlopend een deklaag, onder vaste bandplaatvorm, op een doorlopend oppervlak of op tegen elkaar aangedrukte panelen, het kernmateriaal, ter verlijmen gekenmerkt door het vernevelen van de lijm over de breedte van het voortbewegend deklaag materiaal waarna dat deklaag materiaal onder een drukrol aangedrukt wordt op het voortbewegend kernmateriaal. Inrichting om dergelijke werkwijze uit te voeren.</abstract><edition>4</edition><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | |
| ispartof | |
| issn | |
| language | dut ; eng |
| recordid | cdi_epo_espacenet_BE903882A |
| source | esp@cenet |
| subjects | APPLYING LIQUIDS OR OTHER FLUENT MATERIALS TO SURFACES, IN GENERAL ATOMISING APPARATUS DOMESTIC PLUMBING INSTALLATIONS FOR FRESH WATER OR WASTE WATER FIXED CONSTRUCTIONS LAYERED PRODUCTS LAYERED PRODUCTS, i.e. PRODUCTS BUILT-UP OF STRATA OF FLAT ORNON-FLAT, e.g. CELLULAR OR HONEYCOMB, FORM NOZZLES PERFORMING OPERATIONS SEWERAGE SINKS SPRAYING APPARATUS SPRAYING OR ATOMISING IN GENERAL TRANSPORTING WATER SUPPLY |
| title | Covering polystyrene or polyurethane form board with polystyrene PVC - PE or PP by hot air spray coating covering with hot-melt cold-set adhesive and pressing moving covering on to moving board |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-15T20%3A19%3A16IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-epo_EVB&rft_val_fmt=info:ofi/fmt:kev:mtx:patent&rft.genre=patent&rft.date=1986-04-16&rft_id=info:doi/&rft_dat=%3Cepo_EVB%3EBE903882A%3C/epo_EVB%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |