Research on the Control Method of Force Servo System of Liquid Hydrostatic Guide Oil Film Thickness Test Bench for Machine Tools

The test bench was designed to solve the problem of measuring the oil film thickness of the liquid hydrostatic guideway of machine tools. And based on the fast overshoot of the classical PID control, introducing the self-antidisturbance control algorithm, this study established a mathematical model of the test bench electro-hydraulic servo control system. At the same time, this paper also designed a specific structure of the self-turbulence controller, which adopts optimal quadratic control, pole configuration, PID control, and self-turbulence control to study the control methods of the test bench electro-hydraulic servo system, respectively, and uses the SIMULINK module to establish the system simulation model of the above-mentioned four control methods of the test bench. Simulation results of the test bench control system show that the response speed of the self-turbulence control is 0.4 seconds, 0.2 seconds, and 4.4 seconds faster than PID control, pole configuration, and optimal quadratic control, respectively, and the overshoot is significantly reduced. Finally, the test bench was built to complete the experiments, and the experimental results showed that the followability of the loading force and thickness detection accuracy of the test bench were better after adding the self-turbulence control algorithm and the stability of the oil film thickness was significantly improved by the test bench electro-hydraulic servo control system.