Experimental investigation of reservoir sediments

This study presents an experimental approach to investigate cohesive reservoir sediments. It is shown, how adjacent sediment cores can be extracted from reservoir beds with a Frahm Sediment Sampler. The cores are subsequently used for detailed investigations in a hydraulic laboratory. In a first step, related cores are identified based on their bulk density profiles. One part of the related cores is used to analyze the sediment properties over depth by means of potential stability parameters. The other part is used to determine the depth-dependent erosion stability in an erosion flume (SETEG-system). In the SETEG-system, a photogrammetric method is applied to measure the erosion rates of pre-defined sediment layers at different exposed shear stresses. Subsequently, the critical shear stress can be derived, which leads to an objective evaluation and allows a systematic approach. Finally, both results are combined to investigate possible correlations between the evaluated depth-dependent stability parameters and the measured erosion stability. The approach is presented on sediment cores from the case study “Kleiner Brombachsee”, a reservoir that is located in Middle Franconia, Germany.