Research on the Stability of Anti-Slip Pile Support Structures for Railway Pile Slopes

The accumulation slope is widely distributed in the mountainous area of China; this paper takes the slope of the Chengdu–Lanzhou Railway as the engineering background and analyzes the stability of the slope and the mechanical properties of the anti-slip pile under symmetrical train loads. First, the finite element software Midas GTS NX was used to analyze the effect of the slope after the anti-slip pile support and the stability of the slope at different pile spacings, pile row distances, and pile positions. Then, the finite element analysis results of the pile-side earth pressure and landslide thrust were compared with those of earth pressure theory, the standard method, and field-measured data. The results of this paper are as follows: (1) The anti-slip pile support increased the slope stability coefficient from 1.175 to 1.680. (2) The slope stability gradually decreased with increases in anti-slip pile spacing and pile row distance and rose first and then decreased with an increase in pile position. (3) The active earth pressure values behind the pile by Coulomb theory were slightly smaller than the finite element analysis result; the theoretical values of the passive pressure before the pile were much larger than the finite element analysis results. (4) The landslide thrust was calculated by the transfer coefficient method when the safety factor K = 1.00. The results of explicit method and implicit method were the same, which were 8–19% higher than the finite element simulation value; when the safety factor K = 1.35, the theoretical value of the explicit method was about three times the simulated value, and the theoretical value of the implicit method was about 2.3 times the simulated value. (5) The measured values verified that the simulated values had a certain degree of reliability, and the relative deviation between the two was 5–17%.