Three-Dimensional Surface Deformation of the 2022 Mw 6.6 Menyuan Earthquake from InSAR and GF-7 Stereo Satellite Images
Three-dimensional coseismic surface deformation fields are important for quantifying the geometric and kinematic characteristics of earthquake rupture faults. However, traditional geodetic techniques are constrained by intrinsic limitations: Interferometric synthetic aperture radar (InSAR) can only...
Gespeichert in:
Veröffentlicht in: | Remote sensing (Basel, Switzerland) Switzerland), 2024-06, Vol.16 (12), p.2147 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Three-dimensional coseismic surface deformation fields are important for quantifying the geometric and kinematic characteristics of earthquake rupture faults. However, traditional geodetic techniques are constrained by intrinsic limitations: Interferometric synthetic aperture radar (InSAR) can only extract far-field deformation fields owing to incoherence; global navigation satellite systems (GNSSs) can only acquire displacement at discrete points. The recently developed optical pixel correlation technique, which is based on high-resolution remote sensing images, can acquire near-field coseismic horizontal deformation. In this study, InSAR line-of-sight (LOS) and azimuth direction far-field deformation, horizontal near-field deformation determined using optical pixel correlation based on pre- and post-earthquake GaoFen (GF)-2/7 images, and vertical deformation determined by differencing pre- and post-earthquake GF-7 digital elevation models (DEMs) were combined to comprehensively provide the three-dimensional deformation field of the 2022 Mw 6.6 Menyuan earthquake. The results show that the near-field deformation field calculated by optical pixel correlation quantified displacements distributed over the rupture fault zone, which were not available from the InSAR deformation maps. We identified significant vertical displacements of ~1–1.5 m at a bend region, which were induced by local compressive stress. The maximum uplift (>2.0 m) occurred near the epicenter, on the southern sides of the main and secondary faults along the middle segment of the ruptured Lenglongling fault. In addition, surface two-dimensional strain derived from the displacement maps calculated by optical pixel correlation revealed high strain concentration on the rupture fault zone. The method described herein provides a new tool for a better understanding of the characteristics of coseismic surface deformation and rupture patterns of faults. |
---|---|
ISSN: | 2072-4292 |
DOI: | 10.3390/rs16122147 |