Influence of Different Redevelopment Measures on Water–Oil Immiscible Displacement and Mechanism Analysis

Understanding the two-phase displacement behaviors of oil and water in porous media under different reservoir development modes for enhanced oil recovery is essential. In this paper, the influence of development measures, such as increasing the injection rate, changing the inlet/outlet position, increasing the water viscosity, and reducing the surface tension coefficient, on oil–water dynamic behaviors was studied using a numerical simulation based on the study of the formation of a high-water-cut channel by water flooding at different injection rates. The results show that blockage and restart occur during displacement in the pore–throat channel and during staggered displacement in different pore channels. With an increase in the injection rate, the recovery increases first and then decreases. All the different development measures can increase the swept area and recovery factor. The recovery factor increases significantly by reducing the surface tension coefficient at medium/high injection rates (≥0.01 m/s) and by increasing the viscosity of the water at low injection rates (