Suitability of clayey soils from Jalore and Jodhpur, Rajasthan, India for the production of 3-Litre ceramic water filters

Clayey soils in Raithal, Jalore, Rajasthan, India, have been used for local manufacturing of clay ceramic water filters by potter communities. Potters are trying clayey soils from different locations across India to produce these filters. The suitability of clayey soils from Jheepasani, Jodhpur, and...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Desalination and water treatment 2023-10, Vol.309, p.210-219
Hauptverfasser: Duhan, S., Adari, S.K., Kanwar, N., Gupta, S., Nighojkar, A.K., Ahmad, M., Dammala, P.K., Chhabra, M., Plappally, A.K.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Clayey soils in Raithal, Jalore, Rajasthan, India, have been used for local manufacturing of clay ceramic water filters by potter communities. Potters are trying clayey soils from different locations across India to produce these filters. The suitability of clayey soils from Jheepasani, Jodhpur, and Gajsinghpura, Jodhpur, Rajasthan, India, to manufacture these water filters is compared with soils from Raithal, Jalore, Rajasthan, India. The shrinkage limit and maximum dry density were the lowest for Jheepasani soils. Jheepasani soils have quartz in large quantities, while Gajsinghpura soils are characterized by zeolite. Scanning electron microscopy revealed dense, flaky structure of Gajsinghpura soils and a loosely packed matrix in Jheepasani soils. The micrograph of soils depicts the presence of crystalline character in constituents of Raithal and Gajsinghpura soils. A 3L frustum-shaped composite is made by mixing an equal amount of each of the three soils listed above (taken on their own) with an equal amount of burnout material. The mixture is then pressed into the shape. These press-formed frustums were traditionally baked at 750°C in a potter’s open-hearth kiln at Banad village, Jodhpur, Rajasthan, India, to get the new 3L ceramic water filters. A maximum percolation rate of 1.8 L/h was observed from filters manufactured using Jheepasani soils. The samples extracted from the walls of Gajsinghpura soil-based ceramic water filters were comparatively more substantial than those manufactured from the soils of Raithal and Jheepasani. The effectiveness of these 3L filters was tested using Escherichia coli as a surrogate for other waterborne pathogens. E. coli removal with a log reduction value of 2.62 was showcased by Raithal soil-based ceramic water filters. On the basis of this result, Raithal soil-based ceramic water filters were found to be functionally better among the three ceramic water filter variants manufactured from clayey soils found near the Thar Desert in India.
ISSN:1944-3986
1944-3986
DOI:10.5004/dwt.2023.29873