Influence of tool wear on the heat-flux distribution and temperature at the contact surfaces in the end milling of OT4 titanium alloy

Influence of tool wear on the heat-flux distribution and temperature at the contact surfaces in the end milling of OT4 titanium alloy

The influence of tooth wear at the flank surface on the heat-flux density due to plastic deformation, chip friction at the tooth’s rake surface, and friction of the flank surface at the workpiece in end milling is considered. The dependence of the cutting temperature on the tool wear is obtained. Th...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Russian engineering research 2016-04, Vol.36 (4), p.324-327
Hauptverfasser: Evdokimov, D. V., Skuratov, D. L., Fedorov, D. G.
Format: Artikel
Sprache:eng
Schlagworte:
Engineering
Engineering Design
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The influence of tooth wear at the flank surface on the heat-flux density due to plastic deformation, chip friction at the tooth’s rake surface, and friction of the flank surface at the workpiece in end milling is considered. The dependence of the cutting temperature on the tool wear is obtained. The thermal field in the tool is calculated.
ISSN:1068-798X
1934-8088
DOI:10.3103/S1068798X16040043