The Influence of Tilt on Berkovich Indentation of a Steel Sample Using FEM Analysis and Nanoindentation

The main shape deviations of a Berkovich indenter are the indenter bluntness and indenter tilt. The influence of the Berkovich indenter tilt on the results of the FEM modelling of steel nanoindentation is evaluated in this paper. The indenter tilt has an impact on the indentation curves and contact...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Powder Metallurgy Progress 2022-12, Vol.22 (1), p.53-61
Hauptverfasser: Kovář, Jaroslav, Fuis, Vladimír, Čtvrtlík, Radim, Tomáštík, Jan
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 61
container_issue 1
container_start_page 53
container_title Powder Metallurgy Progress
container_volume 22
creator Kovář, Jaroslav
Fuis, Vladimír
Čtvrtlík, Radim
Tomáštík, Jan
description The main shape deviations of a Berkovich indenter are the indenter bluntness and indenter tilt. The influence of the Berkovich indenter tilt on the results of the FEM modelling of steel nanoindentation is evaluated in this paper. The indenter tilt has an impact on the indentation curves and contact area. The X5CrNiCuNb 16-4 steel nanoindentation was modelled by FEM and the indentation curves were obtained. The Berkovich indenter was blunted and the tilt of the indenter was changed to determine its influence on the indentation curves. The results showed that growing tilt shifts the indentation curves to higher values of indentation forces and makes unloading curves steeper which is in agreement with a larger contact area. The calculated indentation curves were compared with the experimental indentation curves and the impact of the indenter tilt to the indentation curves was determined.
doi_str_mv 10.2478/pmp-2022-0007
format Article
fullrecord <record><control><sourceid>walterdegruyter_cross</sourceid><recordid>TN_cdi_crossref_primary_10_2478_pmp_2022_0007</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>10_2478_pmp_2022_000722153</sourcerecordid><originalsourceid>FETCH-LOGICAL-c1983-462030591f862107fbfde0ae115958307925ec18049851773ed01c980ef06c653</originalsourceid><addsrcrecordid>eNptkE9PAjEQxRujiQQ5eu8XWJ22-6f1hgSUBPUAnDdldwrVpbtpFw3f3hJM9OBpXmbem-T9CLllcMfTQt53-y7hwHkCAMUFGTAhVJJmQlz-0ddkFILdAE-By1yKAdmudkjnzjQHdBXS1tCVbXraOvqI_qP9tNUunmt0ve5t3EaDpssesaFLve8apOtg3ZbOpi907HRzDDZQ7Wr6ql1rf4M35MroJuDoZw7JejZdTZ6TxdvTfDJeJBVTUiRpzkFAppiROWdQmI2pETQylqlMCigUz7BiElIlM1YUAmtglZKABvIqz8SQJOe_lW9D8GjKztu99seSQXkCVUZQ5QlUeQIV_Q9n_5duevQ1bv3hGEX53h587BP-z3HOIs5vNcltiQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>The Influence of Tilt on Berkovich Indentation of a Steel Sample Using FEM Analysis and Nanoindentation</title><source>Walter De Gruyter: Open Access Journals</source><source>EZB-FREE-00999 freely available EZB journals</source><creator>Kovář, Jaroslav ; Fuis, Vladimír ; Čtvrtlík, Radim ; Tomáštík, Jan</creator><creatorcontrib>Kovář, Jaroslav ; Fuis, Vladimír ; Čtvrtlík, Radim ; Tomáštík, Jan</creatorcontrib><description>The main shape deviations of a Berkovich indenter are the indenter bluntness and indenter tilt. The influence of the Berkovich indenter tilt on the results of the FEM modelling of steel nanoindentation is evaluated in this paper. The indenter tilt has an impact on the indentation curves and contact area. The X5CrNiCuNb 16-4 steel nanoindentation was modelled by FEM and the indentation curves were obtained. The Berkovich indenter was blunted and the tilt of the indenter was changed to determine its influence on the indentation curves. The results showed that growing tilt shifts the indentation curves to higher values of indentation forces and makes unloading curves steeper which is in agreement with a larger contact area. The calculated indentation curves were compared with the experimental indentation curves and the impact of the indenter tilt to the indentation curves was determined.</description><identifier>ISSN: 1339-4533</identifier><identifier>EISSN: 1339-4533</identifier><identifier>DOI: 10.2478/pmp-2022-0007</identifier><language>eng</language><publisher>Sciendo</publisher><subject>indenter bluntness ; indenter shape deviations ; indenter tilt ; nanoindentation</subject><ispartof>Powder Metallurgy Progress, 2022-12, Vol.22 (1), p.53-61</ispartof><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c1983-462030591f862107fbfde0ae115958307925ec18049851773ed01c980ef06c653</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://sciendo.com/pdf/10.2478/pmp-2022-0007$$EPDF$$P50$$Gwalterdegruyter$$Hfree_for_read</linktopdf><linktohtml>$$Uhttps://sciendo.com/article/10.2478/pmp-2022-0007$$EHTML$$P50$$Gwalterdegruyter$$Hfree_for_read</linktohtml><link.rule.ids>314,780,784,27924,27925,76164,76165</link.rule.ids></links><search><creatorcontrib>Kovář, Jaroslav</creatorcontrib><creatorcontrib>Fuis, Vladimír</creatorcontrib><creatorcontrib>Čtvrtlík, Radim</creatorcontrib><creatorcontrib>Tomáštík, Jan</creatorcontrib><title>The Influence of Tilt on Berkovich Indentation of a Steel Sample Using FEM Analysis and Nanoindentation</title><title>Powder Metallurgy Progress</title><description>The main shape deviations of a Berkovich indenter are the indenter bluntness and indenter tilt. The influence of the Berkovich indenter tilt on the results of the FEM modelling of steel nanoindentation is evaluated in this paper. The indenter tilt has an impact on the indentation curves and contact area. The X5CrNiCuNb 16-4 steel nanoindentation was modelled by FEM and the indentation curves were obtained. The Berkovich indenter was blunted and the tilt of the indenter was changed to determine its influence on the indentation curves. The results showed that growing tilt shifts the indentation curves to higher values of indentation forces and makes unloading curves steeper which is in agreement with a larger contact area. The calculated indentation curves were compared with the experimental indentation curves and the impact of the indenter tilt to the indentation curves was determined.</description><subject>indenter bluntness</subject><subject>indenter shape deviations</subject><subject>indenter tilt</subject><subject>nanoindentation</subject><issn>1339-4533</issn><issn>1339-4533</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2022</creationdate><recordtype>article</recordtype><recordid>eNptkE9PAjEQxRujiQQ5eu8XWJ22-6f1hgSUBPUAnDdldwrVpbtpFw3f3hJM9OBpXmbem-T9CLllcMfTQt53-y7hwHkCAMUFGTAhVJJmQlz-0ddkFILdAE-By1yKAdmudkjnzjQHdBXS1tCVbXraOvqI_qP9tNUunmt0ve5t3EaDpssesaFLve8apOtg3ZbOpi907HRzDDZQ7Wr6ql1rf4M35MroJuDoZw7JejZdTZ6TxdvTfDJeJBVTUiRpzkFAppiROWdQmI2pETQylqlMCigUz7BiElIlM1YUAmtglZKABvIqz8SQJOe_lW9D8GjKztu99seSQXkCVUZQ5QlUeQIV_Q9n_5duevQ1bv3hGEX53h587BP-z3HOIs5vNcltiQ</recordid><startdate>20221201</startdate><enddate>20221201</enddate><creator>Kovář, Jaroslav</creator><creator>Fuis, Vladimír</creator><creator>Čtvrtlík, Radim</creator><creator>Tomáštík, Jan</creator><general>Sciendo</general><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>20221201</creationdate><title>The Influence of Tilt on Berkovich Indentation of a Steel Sample Using FEM Analysis and Nanoindentation</title><author>Kovář, Jaroslav ; Fuis, Vladimír ; Čtvrtlík, Radim ; Tomáštík, Jan</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c1983-462030591f862107fbfde0ae115958307925ec18049851773ed01c980ef06c653</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2022</creationdate><topic>indenter bluntness</topic><topic>indenter shape deviations</topic><topic>indenter tilt</topic><topic>nanoindentation</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Kovář, Jaroslav</creatorcontrib><creatorcontrib>Fuis, Vladimír</creatorcontrib><creatorcontrib>Čtvrtlík, Radim</creatorcontrib><creatorcontrib>Tomáštík, Jan</creatorcontrib><collection>CrossRef</collection><jtitle>Powder Metallurgy Progress</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Kovář, Jaroslav</au><au>Fuis, Vladimír</au><au>Čtvrtlík, Radim</au><au>Tomáštík, Jan</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>The Influence of Tilt on Berkovich Indentation of a Steel Sample Using FEM Analysis and Nanoindentation</atitle><jtitle>Powder Metallurgy Progress</jtitle><date>2022-12-01</date><risdate>2022</risdate><volume>22</volume><issue>1</issue><spage>53</spage><epage>61</epage><pages>53-61</pages><issn>1339-4533</issn><eissn>1339-4533</eissn><abstract>The main shape deviations of a Berkovich indenter are the indenter bluntness and indenter tilt. The influence of the Berkovich indenter tilt on the results of the FEM modelling of steel nanoindentation is evaluated in this paper. The indenter tilt has an impact on the indentation curves and contact area. The X5CrNiCuNb 16-4 steel nanoindentation was modelled by FEM and the indentation curves were obtained. The Berkovich indenter was blunted and the tilt of the indenter was changed to determine its influence on the indentation curves. The results showed that growing tilt shifts the indentation curves to higher values of indentation forces and makes unloading curves steeper which is in agreement with a larger contact area. The calculated indentation curves were compared with the experimental indentation curves and the impact of the indenter tilt to the indentation curves was determined.</abstract><pub>Sciendo</pub><doi>10.2478/pmp-2022-0007</doi><tpages>9</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 1339-4533
ispartof Powder Metallurgy Progress, 2022-12, Vol.22 (1), p.53-61
issn 1339-4533
1339-4533
language eng
recordid cdi_crossref_primary_10_2478_pmp_2022_0007
source Walter De Gruyter: Open Access Journals; EZB-FREE-00999 freely available EZB journals
subjects indenter bluntness
indenter shape deviations
indenter tilt
nanoindentation
title The Influence of Tilt on Berkovich Indentation of a Steel Sample Using FEM Analysis and Nanoindentation
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-23T13%3A46%3A18IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-walterdegruyter_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=The%20Influence%20of%20Tilt%20on%20Berkovich%20Indentation%20of%20a%20Steel%20Sample%20Using%20FEM%20Analysis%20and%20Nanoindentation&rft.jtitle=Powder%20Metallurgy%20Progress&rft.au=Kov%C3%A1%C5%99,%20Jaroslav&rft.date=2022-12-01&rft.volume=22&rft.issue=1&rft.spage=53&rft.epage=61&rft.pages=53-61&rft.issn=1339-4533&rft.eissn=1339-4533&rft_id=info:doi/10.2478/pmp-2022-0007&rft_dat=%3Cwalterdegruyter_cross%3E10_2478_pmp_2022_000722153%3C/walterdegruyter_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true