Titanium Casting Procedure Using Thermal Expansion Inhibited Investment: Part 1. Castability and Dimensional Change
We tried to cast the pure titanium with the experimental thermal expansion inhibited investment which has less expansion. In this study, we investigated the effects of the concentration of colloidal silica included into the mixing liquid for castability and fitness of casting. The results were as fo...
Gespeichert in:
Veröffentlicht in: | Nihon Hotetsu Shika Gakkai Zasshi 1993/12/01, Vol.37(6), pp.1319-1328 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng ; jpn |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 1328 |
---|---|
container_issue | 6 |
container_start_page | 1319 |
container_title | Nihon Hotetsu Shika Gakkai Zasshi |
container_volume | 37 |
creator | Komasa, Yutaka Nezumi, Masahiro Nakamura, Shigeyuki Kakimoto, Kazutoshi Nukata, Kazuto Gonda, Yoshimichi |
description | We tried to cast the pure titanium with the experimental thermal expansion inhibited investment which has less expansion. In this study, we investigated the effects of the concentration of colloidal silica included into the mixing liquid for castability and fitness of casting. The results were as follows. 1. Using the mixing liquids including any concentration of colloidal silica, it was easy to dig out the castings and to remove the fired investment from castings. 2. There were few blowholes in castings. 3. On the surface roughness of castings, there was little difference between using the thermal expansion inhibited investment and using the investments on the market. 4. Using the liquid which included 10% colloidal silica for mixing, the castings shrank. But the increase in concentration of colloidal silica included in the mixing liquid for the investment caused the expansion of castings. This result shows that it is possible to compensate the casting shrinkage by using the experimental thermal expansion inhibited investment. |
doi_str_mv | 10.2186/jjps.37.1319 |
format | Article |
fullrecord | <record><control><sourceid>jstage_cross</sourceid><recordid>TN_cdi_crossref_primary_10_2186_jjps_37_1319</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>article_jjps1957_37_6_37_6_1319_article_char_en</sourcerecordid><originalsourceid>FETCH-LOGICAL-c1379-683445d9dfca3b0de5d8972c454a4d0d30e19a47c4ede24f9ccd6b774ed420ef3</originalsourceid><addsrcrecordid>eNo9kEFPAjEQhRujiQS5-QP2B7jYbtttezQEkYRED0virem2s1DCFtIWo_9eVgyXmXmZ773DQ-iR4GlFZP282x3TlIopoUTdoBGRkpZEiM9bNMJUqpJTWd-jSUq-xRgrzkTFR2jR-GyCP_XFzKTsw6b4iAcL7hShWKdBN1uIvdkX8--jCckfQrEMW9_6DO58fUHKPYT8gO46s08w-d9jtH6dN7O3cvW-WM5eVqUlVKiylpQx7pTrrKEtdsCdVKKyjDPDHHYUA1GGCcvAQcU6Za2rWyHOklUYOjpGT5dcGw8pRej0MfrexB9NsB560EMPmgo99HDG5xd8l7LZwBU2MXu7hz-YKC4GQ30Zg-_6t1sTNQT6CyFRayY</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Titanium Casting Procedure Using Thermal Expansion Inhibited Investment: Part 1. Castability and Dimensional Change</title><source>EZB Electronic Journals Library</source><source>J-STAGE</source><creator>Komasa, Yutaka ; Nezumi, Masahiro ; Nakamura, Shigeyuki ; Kakimoto, Kazutoshi ; Nukata, Kazuto ; Gonda, Yoshimichi</creator><creatorcontrib>Komasa, Yutaka ; Nezumi, Masahiro ; Nakamura, Shigeyuki ; Kakimoto, Kazutoshi ; Nukata, Kazuto ; Gonda, Yoshimichi</creatorcontrib><description>We tried to cast the pure titanium with the experimental thermal expansion inhibited investment which has less expansion. In this study, we investigated the effects of the concentration of colloidal silica included into the mixing liquid for castability and fitness of casting. The results were as follows. 1. Using the mixing liquids including any concentration of colloidal silica, it was easy to dig out the castings and to remove the fired investment from castings. 2. There were few blowholes in castings. 3. On the surface roughness of castings, there was little difference between using the thermal expansion inhibited investment and using the investments on the market. 4. Using the liquid which included 10% colloidal silica for mixing, the castings shrank. But the increase in concentration of colloidal silica included in the mixing liquid for the investment caused the expansion of castings. This result shows that it is possible to compensate the casting shrinkage by using the experimental thermal expansion inhibited investment.</description><identifier>ISSN: 0389-5386</identifier><identifier>EISSN: 1883-177X</identifier><identifier>DOI: 10.2186/jjps.37.1319</identifier><language>eng ; jpn</language><publisher>Japan Prosthodontic Society</publisher><subject>castability ; fitness ; investment ; titanium casting</subject><ispartof>Nihon Hotetsu Shika Gakkai Zasshi, 1993/12/01, Vol.37(6), pp.1319-1328</ispartof><rights>Japan Prosthodontic Society</rights><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,1883,27924,27925</link.rule.ids></links><search><creatorcontrib>Komasa, Yutaka</creatorcontrib><creatorcontrib>Nezumi, Masahiro</creatorcontrib><creatorcontrib>Nakamura, Shigeyuki</creatorcontrib><creatorcontrib>Kakimoto, Kazutoshi</creatorcontrib><creatorcontrib>Nukata, Kazuto</creatorcontrib><creatorcontrib>Gonda, Yoshimichi</creatorcontrib><title>Titanium Casting Procedure Using Thermal Expansion Inhibited Investment: Part 1. Castability and Dimensional Change</title><title>Nihon Hotetsu Shika Gakkai Zasshi</title><addtitle>J Jpn Prosthodont Soc</addtitle><description>We tried to cast the pure titanium with the experimental thermal expansion inhibited investment which has less expansion. In this study, we investigated the effects of the concentration of colloidal silica included into the mixing liquid for castability and fitness of casting. The results were as follows. 1. Using the mixing liquids including any concentration of colloidal silica, it was easy to dig out the castings and to remove the fired investment from castings. 2. There were few blowholes in castings. 3. On the surface roughness of castings, there was little difference between using the thermal expansion inhibited investment and using the investments on the market. 4. Using the liquid which included 10% colloidal silica for mixing, the castings shrank. But the increase in concentration of colloidal silica included in the mixing liquid for the investment caused the expansion of castings. This result shows that it is possible to compensate the casting shrinkage by using the experimental thermal expansion inhibited investment.</description><subject>castability</subject><subject>fitness</subject><subject>investment</subject><subject>titanium casting</subject><issn>0389-5386</issn><issn>1883-177X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1993</creationdate><recordtype>article</recordtype><recordid>eNo9kEFPAjEQhRujiQS5-QP2B7jYbtttezQEkYRED0virem2s1DCFtIWo_9eVgyXmXmZ773DQ-iR4GlFZP282x3TlIopoUTdoBGRkpZEiM9bNMJUqpJTWd-jSUq-xRgrzkTFR2jR-GyCP_XFzKTsw6b4iAcL7hShWKdBN1uIvdkX8--jCckfQrEMW9_6DO58fUHKPYT8gO46s08w-d9jtH6dN7O3cvW-WM5eVqUlVKiylpQx7pTrrKEtdsCdVKKyjDPDHHYUA1GGCcvAQcU6Za2rWyHOklUYOjpGT5dcGw8pRej0MfrexB9NsB560EMPmgo99HDG5xd8l7LZwBU2MXu7hz-YKC4GQ30Zg-_6t1sTNQT6CyFRayY</recordid><startdate>19931201</startdate><enddate>19931201</enddate><creator>Komasa, Yutaka</creator><creator>Nezumi, Masahiro</creator><creator>Nakamura, Shigeyuki</creator><creator>Kakimoto, Kazutoshi</creator><creator>Nukata, Kazuto</creator><creator>Gonda, Yoshimichi</creator><general>Japan Prosthodontic Society</general><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>19931201</creationdate><title>Titanium Casting Procedure Using Thermal Expansion Inhibited Investment</title><author>Komasa, Yutaka ; Nezumi, Masahiro ; Nakamura, Shigeyuki ; Kakimoto, Kazutoshi ; Nukata, Kazuto ; Gonda, Yoshimichi</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c1379-683445d9dfca3b0de5d8972c454a4d0d30e19a47c4ede24f9ccd6b774ed420ef3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng ; jpn</language><creationdate>1993</creationdate><topic>castability</topic><topic>fitness</topic><topic>investment</topic><topic>titanium casting</topic><toplevel>online_resources</toplevel><creatorcontrib>Komasa, Yutaka</creatorcontrib><creatorcontrib>Nezumi, Masahiro</creatorcontrib><creatorcontrib>Nakamura, Shigeyuki</creatorcontrib><creatorcontrib>Kakimoto, Kazutoshi</creatorcontrib><creatorcontrib>Nukata, Kazuto</creatorcontrib><creatorcontrib>Gonda, Yoshimichi</creatorcontrib><collection>CrossRef</collection><jtitle>Nihon Hotetsu Shika Gakkai Zasshi</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Komasa, Yutaka</au><au>Nezumi, Masahiro</au><au>Nakamura, Shigeyuki</au><au>Kakimoto, Kazutoshi</au><au>Nukata, Kazuto</au><au>Gonda, Yoshimichi</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Titanium Casting Procedure Using Thermal Expansion Inhibited Investment: Part 1. Castability and Dimensional Change</atitle><jtitle>Nihon Hotetsu Shika Gakkai Zasshi</jtitle><addtitle>J Jpn Prosthodont Soc</addtitle><date>1993-12-01</date><risdate>1993</risdate><volume>37</volume><issue>6</issue><spage>1319</spage><epage>1328</epage><pages>1319-1328</pages><issn>0389-5386</issn><eissn>1883-177X</eissn><abstract>We tried to cast the pure titanium with the experimental thermal expansion inhibited investment which has less expansion. In this study, we investigated the effects of the concentration of colloidal silica included into the mixing liquid for castability and fitness of casting. The results were as follows. 1. Using the mixing liquids including any concentration of colloidal silica, it was easy to dig out the castings and to remove the fired investment from castings. 2. There were few blowholes in castings. 3. On the surface roughness of castings, there was little difference between using the thermal expansion inhibited investment and using the investments on the market. 4. Using the liquid which included 10% colloidal silica for mixing, the castings shrank. But the increase in concentration of colloidal silica included in the mixing liquid for the investment caused the expansion of castings. This result shows that it is possible to compensate the casting shrinkage by using the experimental thermal expansion inhibited investment.</abstract><pub>Japan Prosthodontic Society</pub><doi>10.2186/jjps.37.1319</doi><tpages>10</tpages><oa>free_for_read</oa></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0389-5386 |
ispartof | Nihon Hotetsu Shika Gakkai Zasshi, 1993/12/01, Vol.37(6), pp.1319-1328 |
issn | 0389-5386 1883-177X |
language | eng ; jpn |
recordid | cdi_crossref_primary_10_2186_jjps_37_1319 |
source | EZB Electronic Journals Library; J-STAGE |
subjects | castability fitness investment titanium casting |
title | Titanium Casting Procedure Using Thermal Expansion Inhibited Investment: Part 1. Castability and Dimensional Change |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-07T19%3A42%3A08IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-jstage_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Titanium%20Casting%20Procedure%20Using%20Thermal%20Expansion%20Inhibited%20Investment:%20Part%201.%20Castability%20and%20Dimensional%20Change&rft.jtitle=Nihon%20Hotetsu%20Shika%20Gakkai%20Zasshi&rft.au=Komasa,%20Yutaka&rft.date=1993-12-01&rft.volume=37&rft.issue=6&rft.spage=1319&rft.epage=1328&rft.pages=1319-1328&rft.issn=0389-5386&rft.eissn=1883-177X&rft_id=info:doi/10.2186/jjps.37.1319&rft_dat=%3Cjstage_cross%3Earticle_jjps1957_37_6_37_6_1319_article_char_en%3C/jstage_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |