Preparation of Titanium Dioxide Fibers Using Sodium Alginate

A new method for preparing titanium dioxide fibers using sodium alginate has been developed, Titanium dioxide fibers were obtained by heating alginic acid fibers containing titanium dioxide particles (precursors) in air, which were produced from titanium dioxide sol and sodium alginate as starting m...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of the Ceramic Society of Japan 1997/03/01, Vol.105(1219), pp.206-209
Hauptverfasser: HASHISHIN, Takeshi, OE, Masashi, YAMAMOTO, Yoshifumi, KANEKO, Yasunari
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 209
container_issue 1219
container_start_page 206
container_title Journal of the Ceramic Society of Japan
container_volume 105
creator HASHISHIN, Takeshi
OE, Masashi
YAMAMOTO, Yoshifumi
KANEKO, Yasunari
description A new method for preparing titanium dioxide fibers using sodium alginate has been developed, Titanium dioxide fibers were obtained by heating alginic acid fibers containing titanium dioxide particles (precursors) in air, which were produced from titanium dioxide sol and sodium alginate as starting materials. X-ray microanalysis (EPMA) of the cross section of the precursors showed that titanium dioxide particles were homogeneously distributed from the surface to the center of the precursors. When the precursors were heated (holding time: 1h, temperature: 900°C), phase transition from anatase to rutile was observed. In addition, the pores between particles became very small as heating temperature was increased above at 900°C, which indicates that the particles become densely distributed.
doi_str_mv 10.2109/jcersj.105.206
format Article
fullrecord <record><control><sourceid>jstage_cross</sourceid><recordid>TN_cdi_crossref_primary_10_2109_jcersj_105_206</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>article_jcersj1988_105_1219_105_1219_206_article_char_en</sourcerecordid><originalsourceid>FETCH-LOGICAL-c459t-3eb55ad0b78940ea0ad7e97fb4d885a951031a9d8e32218ee1f9d93825cdf6733</originalsourceid><addsrcrecordid>eNpFkM1Lw0AQxRdRsNRePefgNXH2K9kFL6VaFYoKtucw2d3ULWlSdiPof29qpJ5mhnnvN7wh5JpCxijo251xIe4yCjJjkJ-RCVWKpRQYOycT0FSkUgBcklmMvgJgQokc-ITcvQV3wIC979qkq5O177H1n_vk3ndf3rpk6auBnGyib7fJe2ePu3mz9S327opc1NhEN_urU7JZPqwXT-nq9fF5MV-lRkjdp9xVUqKFqlBagENAWzhd1JWwSknUkgKnqK1ynDGqnKO1tporJo2t84LzKclGrgldjMHV5SH4PYbvkkJ5jF-O8YdRlkP8wXAzGg4YDTZ1wNb4eHKxnB8fMMheRtku9rh1pz2G3pvG_VGpVuqXTBnV_81w5yQ0HxhK1_IfPzB14A</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Preparation of Titanium Dioxide Fibers Using Sodium Alginate</title><source>J-STAGE (Japan Science &amp; Technology Information Aggregator, Electronic) Freely Available Titles - Japanese</source><source>Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals</source><creator>HASHISHIN, Takeshi ; OE, Masashi ; YAMAMOTO, Yoshifumi ; KANEKO, Yasunari</creator><creatorcontrib>HASHISHIN, Takeshi ; OE, Masashi ; YAMAMOTO, Yoshifumi ; KANEKO, Yasunari</creatorcontrib><description>A new method for preparing titanium dioxide fibers using sodium alginate has been developed, Titanium dioxide fibers were obtained by heating alginic acid fibers containing titanium dioxide particles (precursors) in air, which were produced from titanium dioxide sol and sodium alginate as starting materials. X-ray microanalysis (EPMA) of the cross section of the precursors showed that titanium dioxide particles were homogeneously distributed from the surface to the center of the precursors. When the precursors were heated (holding time: 1h, temperature: 900°C), phase transition from anatase to rutile was observed. In addition, the pores between particles became very small as heating temperature was increased above at 900°C, which indicates that the particles become densely distributed.</description><identifier>ISSN: 0914-5400</identifier><identifier>EISSN: 1882-1022</identifier><identifier>DOI: 10.2109/jcersj.105.206</identifier><identifier>CODEN: YGKSA4</identifier><language>eng</language><publisher>Tokyo: The Ceramic Society of Japan</publisher><subject>Alginic acid fibers containing titanium dioxide particles (precursors) ; Anatase phase ; Applied sciences ; Building materials. Ceramics. Glasses ; Ceramic and carbon fibers ; Ceramic industries ; Chemical industry and chemicals ; Exact sciences and technology ; Heat treatment ; Particle growth ; Rutile phase ; Sodium alginate ; Technical ceramics</subject><ispartof>Journal of the Ceramic Society of Japan, 1997/03/01, Vol.105(1219), pp.206-209</ispartof><rights>The Ceramic Society of Japan</rights><rights>1997 INIST-CNRS</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c459t-3eb55ad0b78940ea0ad7e97fb4d885a951031a9d8e32218ee1f9d93825cdf6733</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,1877,27901,27902</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&amp;idt=2632484$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>HASHISHIN, Takeshi</creatorcontrib><creatorcontrib>OE, Masashi</creatorcontrib><creatorcontrib>YAMAMOTO, Yoshifumi</creatorcontrib><creatorcontrib>KANEKO, Yasunari</creatorcontrib><title>Preparation of Titanium Dioxide Fibers Using Sodium Alginate</title><title>Journal of the Ceramic Society of Japan</title><addtitle>J. Ceram. Soc. Japan</addtitle><description>A new method for preparing titanium dioxide fibers using sodium alginate has been developed, Titanium dioxide fibers were obtained by heating alginic acid fibers containing titanium dioxide particles (precursors) in air, which were produced from titanium dioxide sol and sodium alginate as starting materials. X-ray microanalysis (EPMA) of the cross section of the precursors showed that titanium dioxide particles were homogeneously distributed from the surface to the center of the precursors. When the precursors were heated (holding time: 1h, temperature: 900°C), phase transition from anatase to rutile was observed. In addition, the pores between particles became very small as heating temperature was increased above at 900°C, which indicates that the particles become densely distributed.</description><subject>Alginic acid fibers containing titanium dioxide particles (precursors)</subject><subject>Anatase phase</subject><subject>Applied sciences</subject><subject>Building materials. Ceramics. Glasses</subject><subject>Ceramic and carbon fibers</subject><subject>Ceramic industries</subject><subject>Chemical industry and chemicals</subject><subject>Exact sciences and technology</subject><subject>Heat treatment</subject><subject>Particle growth</subject><subject>Rutile phase</subject><subject>Sodium alginate</subject><subject>Technical ceramics</subject><issn>0914-5400</issn><issn>1882-1022</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1997</creationdate><recordtype>article</recordtype><recordid>eNpFkM1Lw0AQxRdRsNRePefgNXH2K9kFL6VaFYoKtucw2d3ULWlSdiPof29qpJ5mhnnvN7wh5JpCxijo251xIe4yCjJjkJ-RCVWKpRQYOycT0FSkUgBcklmMvgJgQokc-ITcvQV3wIC979qkq5O177H1n_vk3ndf3rpk6auBnGyib7fJe2ePu3mz9S327opc1NhEN_urU7JZPqwXT-nq9fF5MV-lRkjdp9xVUqKFqlBagENAWzhd1JWwSknUkgKnqK1ynDGqnKO1tporJo2t84LzKclGrgldjMHV5SH4PYbvkkJ5jF-O8YdRlkP8wXAzGg4YDTZ1wNb4eHKxnB8fMMheRtku9rh1pz2G3pvG_VGpVuqXTBnV_81w5yQ0HxhK1_IfPzB14A</recordid><startdate>19970301</startdate><enddate>19970301</enddate><creator>HASHISHIN, Takeshi</creator><creator>OE, Masashi</creator><creator>YAMAMOTO, Yoshifumi</creator><creator>KANEKO, Yasunari</creator><general>The Ceramic Society of Japan</general><general>Nippon seramikkusu kyokai</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>19970301</creationdate><title>Preparation of Titanium Dioxide Fibers Using Sodium Alginate</title><author>HASHISHIN, Takeshi ; OE, Masashi ; YAMAMOTO, Yoshifumi ; KANEKO, Yasunari</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c459t-3eb55ad0b78940ea0ad7e97fb4d885a951031a9d8e32218ee1f9d93825cdf6733</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1997</creationdate><topic>Alginic acid fibers containing titanium dioxide particles (precursors)</topic><topic>Anatase phase</topic><topic>Applied sciences</topic><topic>Building materials. Ceramics. Glasses</topic><topic>Ceramic and carbon fibers</topic><topic>Ceramic industries</topic><topic>Chemical industry and chemicals</topic><topic>Exact sciences and technology</topic><topic>Heat treatment</topic><topic>Particle growth</topic><topic>Rutile phase</topic><topic>Sodium alginate</topic><topic>Technical ceramics</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>HASHISHIN, Takeshi</creatorcontrib><creatorcontrib>OE, Masashi</creatorcontrib><creatorcontrib>YAMAMOTO, Yoshifumi</creatorcontrib><creatorcontrib>KANEKO, Yasunari</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><jtitle>Journal of the Ceramic Society of Japan</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>HASHISHIN, Takeshi</au><au>OE, Masashi</au><au>YAMAMOTO, Yoshifumi</au><au>KANEKO, Yasunari</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Preparation of Titanium Dioxide Fibers Using Sodium Alginate</atitle><jtitle>Journal of the Ceramic Society of Japan</jtitle><addtitle>J. Ceram. Soc. Japan</addtitle><date>1997-03-01</date><risdate>1997</risdate><volume>105</volume><issue>1219</issue><spage>206</spage><epage>209</epage><pages>206-209</pages><issn>0914-5400</issn><eissn>1882-1022</eissn><coden>YGKSA4</coden><abstract>A new method for preparing titanium dioxide fibers using sodium alginate has been developed, Titanium dioxide fibers were obtained by heating alginic acid fibers containing titanium dioxide particles (precursors) in air, which were produced from titanium dioxide sol and sodium alginate as starting materials. X-ray microanalysis (EPMA) of the cross section of the precursors showed that titanium dioxide particles were homogeneously distributed from the surface to the center of the precursors. When the precursors were heated (holding time: 1h, temperature: 900°C), phase transition from anatase to rutile was observed. In addition, the pores between particles became very small as heating temperature was increased above at 900°C, which indicates that the particles become densely distributed.</abstract><cop>Tokyo</cop><pub>The Ceramic Society of Japan</pub><doi>10.2109/jcersj.105.206</doi><tpages>4</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 0914-5400
ispartof Journal of the Ceramic Society of Japan, 1997/03/01, Vol.105(1219), pp.206-209
issn 0914-5400
1882-1022
language eng
recordid cdi_crossref_primary_10_2109_jcersj_105_206
source J-STAGE (Japan Science & Technology Information Aggregator, Electronic) Freely Available Titles - Japanese; Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals
subjects Alginic acid fibers containing titanium dioxide particles (precursors)
Anatase phase
Applied sciences
Building materials. Ceramics. Glasses
Ceramic and carbon fibers
Ceramic industries
Chemical industry and chemicals
Exact sciences and technology
Heat treatment
Particle growth
Rutile phase
Sodium alginate
Technical ceramics
title Preparation of Titanium Dioxide Fibers Using Sodium Alginate
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-02T09%3A59%3A33IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-jstage_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Preparation%20of%20Titanium%20Dioxide%20Fibers%20Using%20Sodium%20Alginate&rft.jtitle=Journal%20of%20the%20Ceramic%20Society%20of%20Japan&rft.au=HASHISHIN,%20Takeshi&rft.date=1997-03-01&rft.volume=105&rft.issue=1219&rft.spage=206&rft.epage=209&rft.pages=206-209&rft.issn=0914-5400&rft.eissn=1882-1022&rft.coden=YGKSA4&rft_id=info:doi/10.2109/jcersj.105.206&rft_dat=%3Cjstage_cross%3Earticle_jcersj1988_105_1219_105_1219_206_article_char_en%3C/jstage_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true