Melt infiltration casting of bulk metallic-glass matrix composites
The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed comp...
Gespeichert in:
| Veröffentlicht in: | Journal of materials research 1998-10, Vol.13 (10), p.2896-2901 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 2901 |
|---|---|
| container_issue | 10 |
| container_start_page | 2896 |
| container_title | Journal of materials research |
| container_volume | 13 |
| creator | Dandliker, R. B. Conner, R. D. Johnson, W. L. |
| description | The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 matrix was quenched to a glass after infiltrating the reinforcement. We analyzed the microstructure of the composites by x-ray diffraction and scanning electron microscopy. The measured porosity was less than 3% and the matrix was about 97% amorphous material. |
| doi_str_mv | 10.1557/JMR.1998.0396 |
| format | Article |
| fullrecord | <record><control><sourceid>cambridge_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1557_JMR_1998_0396</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><cupid>10_1557_JMR_1998_0396</cupid><sourcerecordid>10_1557_JMR_1998_0396</sourcerecordid><originalsourceid>FETCH-LOGICAL-c379t-c56cd7f3978aeb6134d729af65b8e5c39d39218a621fc2f4b20f6769f29e7c1c3</originalsourceid><addsrcrecordid>eNp1kMtOAjEARRujiYgu3c8PDPTd6VJRRw1oNIrumk6nJYV5kLYk-PdCJLpydTcn9-YeAC4RHCHGxPhx9jpCUhYjSCQ_AgMMKc0ZwfwYDGBR0BxLRE_BWYxLCBGDgg7A9cw2KfOd800KOvm-y4yOyXeLrHdZtWlWWWuTbhpv8kWjY8xanYLfZqZv1330ycZzcOJ0E-3FIYfg_e72bXKfT5_Lh8nVNDdEyJQbxk0tHJGi0LbiiNBaYKkdZ1VhmSGyJhKjQnOMnMGOVhg6Lrh0WFphkCFDkP_0mtDHGKxT6-BbHb4UgmovQO0EqL0AtRfwx_uY7PYX1mGluCCCKV6-qPnTR3kz_yzUbMePD_26rYKvF1Yt-03odp_-WfgG37ltSQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Melt infiltration casting of bulk metallic-glass matrix composites</title><source>SpringerLink Journals - AutoHoldings</source><creator>Dandliker, R. B. ; Conner, R. D. ; Johnson, W. L.</creator><creatorcontrib>Dandliker, R. B. ; Conner, R. D. ; Johnson, W. L.</creatorcontrib><description>The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 matrix was quenched to a glass after infiltrating the reinforcement. We analyzed the microstructure of the composites by x-ray diffraction and scanning electron microscopy. The measured porosity was less than 3% and the matrix was about 97% amorphous material.</description><identifier>ISSN: 0884-2914</identifier><identifier>EISSN: 2044-5326</identifier><identifier>DOI: 10.1557/JMR.1998.0396</identifier><language>eng</language><publisher>New York, USA: Cambridge University Press</publisher><ispartof>Journal of materials research, 1998-10, Vol.13 (10), p.2896-2901</ispartof><rights>Copyright © Materials Research Society 1998</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c379t-c56cd7f3978aeb6134d729af65b8e5c39d39218a621fc2f4b20f6769f29e7c1c3</citedby><cites>FETCH-LOGICAL-c379t-c56cd7f3978aeb6134d729af65b8e5c39d39218a621fc2f4b20f6769f29e7c1c3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids></links><search><creatorcontrib>Dandliker, R. B.</creatorcontrib><creatorcontrib>Conner, R. D.</creatorcontrib><creatorcontrib>Johnson, W. L.</creatorcontrib><title>Melt infiltration casting of bulk metallic-glass matrix composites</title><title>Journal of materials research</title><addtitle>J. Mater. Res</addtitle><description>The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 matrix was quenched to a glass after infiltrating the reinforcement. We analyzed the microstructure of the composites by x-ray diffraction and scanning electron microscopy. The measured porosity was less than 3% and the matrix was about 97% amorphous material.</description><issn>0884-2914</issn><issn>2044-5326</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1998</creationdate><recordtype>article</recordtype><recordid>eNp1kMtOAjEARRujiYgu3c8PDPTd6VJRRw1oNIrumk6nJYV5kLYk-PdCJLpydTcn9-YeAC4RHCHGxPhx9jpCUhYjSCQ_AgMMKc0ZwfwYDGBR0BxLRE_BWYxLCBGDgg7A9cw2KfOd800KOvm-y4yOyXeLrHdZtWlWWWuTbhpv8kWjY8xanYLfZqZv1330ycZzcOJ0E-3FIYfg_e72bXKfT5_Lh8nVNDdEyJQbxk0tHJGi0LbiiNBaYKkdZ1VhmSGyJhKjQnOMnMGOVhg6Lrh0WFphkCFDkP_0mtDHGKxT6-BbHb4UgmovQO0EqL0AtRfwx_uY7PYX1mGluCCCKV6-qPnTR3kz_yzUbMePD_26rYKvF1Yt-03odp_-WfgG37ltSQ</recordid><startdate>19981001</startdate><enddate>19981001</enddate><creator>Dandliker, R. B.</creator><creator>Conner, R. D.</creator><creator>Johnson, W. L.</creator><general>Cambridge University Press</general><scope>BSCLL</scope><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>19981001</creationdate><title>Melt infiltration casting of bulk metallic-glass matrix composites</title><author>Dandliker, R. B. ; Conner, R. D. ; Johnson, W. L.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c379t-c56cd7f3978aeb6134d729af65b8e5c39d39218a621fc2f4b20f6769f29e7c1c3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1998</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Dandliker, R. B.</creatorcontrib><creatorcontrib>Conner, R. D.</creatorcontrib><creatorcontrib>Johnson, W. L.</creatorcontrib><collection>Istex</collection><collection>CrossRef</collection><jtitle>Journal of materials research</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Dandliker, R. B.</au><au>Conner, R. D.</au><au>Johnson, W. L.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Melt infiltration casting of bulk metallic-glass matrix composites</atitle><jtitle>Journal of materials research</jtitle><addtitle>J. Mater. Res</addtitle><date>1998-10-01</date><risdate>1998</risdate><volume>13</volume><issue>10</issue><spage>2896</spage><epage>2901</epage><pages>2896-2901</pages><issn>0884-2914</issn><eissn>2044-5326</eissn><abstract>The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 matrix was quenched to a glass after infiltrating the reinforcement. We analyzed the microstructure of the composites by x-ray diffraction and scanning electron microscopy. The measured porosity was less than 3% and the matrix was about 97% amorphous material.</abstract><cop>New York, USA</cop><pub>Cambridge University Press</pub><doi>10.1557/JMR.1998.0396</doi><tpages>6</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0884-2914 |
| ispartof | Journal of materials research, 1998-10, Vol.13 (10), p.2896-2901 |
| issn | 0884-2914 2044-5326 |
| language | eng |
| recordid | cdi_crossref_primary_10_1557_JMR_1998_0396 |
| source | SpringerLink Journals - AutoHoldings |
| title | Melt infiltration casting of bulk metallic-glass matrix composites |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-29T18%3A43%3A07IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-cambridge_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Melt%20infiltration%20casting%20of%20bulk%20metallic-glass%20matrix%20composites&rft.jtitle=Journal%20of%20materials%20research&rft.au=Dandliker,%20R.%20B.&rft.date=1998-10-01&rft.volume=13&rft.issue=10&rft.spage=2896&rft.epage=2901&rft.pages=2896-2901&rft.issn=0884-2914&rft.eissn=2044-5326&rft_id=info:doi/10.1557/JMR.1998.0396&rft_dat=%3Ccambridge_cross%3E10_1557_JMR_1998_0396%3C/cambridge_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_cupid=10_1557_JMR_1998_0396&rfr_iscdi=true |